American Lithium Corp. (“American Lithium” or the “Company”)
(TSX-V:LI | NASDAQ:AMLI | Frankfurt:5LA1) is pleased to provide
assay results from four additional vertical diamond drill holes
recently completed under the Environmental Impact Assessment
(“EIA”) drill program at the Falchani Lithium project in Puno
southeastern Peru (“Falchani”). The holes, in addition to drill
holes announced July 12, 2023, were drilled under the ten-hole EIA
hydrology drilling program launched at Falchani last Fall as part
of the EIA hydrology study designed by EDASI SAC and SRK Peru with
field work overseen by EDASI. The EIA hydrological study was
approved by ANA.
Highlights
- Drilling
intersected long intervals of typical Falchani volcanic tuff as
well as upper breccia material with lithium mineralization up to
5,025 parts per million (“ppm”) and cesium grades up to 8,290
ppm;
- Drilling has
significantly extended lithium mineralization 400 metres (“m”) west
of the previous resource boundary;
- Final EIA drill
results to be incorporated into an updated resource report being
prepared by Stantec Consulting Inc. (“Stantec”); and
- Ground water has
yet to be encountered in any holes.
Currently, piezometers have been installed in
four of the holes to monitor water activity through the calendar
year. On completion of water monitoring, a final detailed EIA
Report will be filed with the authorities in 2024. In the interim,
most of the field work to enable the issuance of a Semi-Detailed
EIA Report should be completed this fall. Such a filing would allow
drilling across Falchani without the need for additional drill
permits.
Simon Clarke, CEO of American Lithium,
states, “We are excited to continue to intersect thick
lithium mineralization to the west of the current Falchani resource
footprint. The entire EIA drilling program, in addition to
providing valuable and required hydrological data, looks to be
significantly expanding the mineralization at Falchani. An updated
mineral resource, likely to show increased resource confidence and
resource size, is expected shortly.”
EIA Drill Program and
ResultsLink to: Figure 1 – Updated Falchani EIA Hydrology
and Previous Drill Hole Location Map (also see below)
- Drill hole
Pz07-TV intersected mineralization over the entire
hole with the upper 0-95 m averaging 2,345 ppm Lithium (Li), 829
ppm Cesium (Cs), 1,265 ppm Rubidium (Rb) and 2.57% Potassium (K);
See Table 1 – Drill Hole Pz07-TV results, below:
- Substantial
sub-interval of +3,000 ppm Li intersected from surface to 42
m;
- Maximum Li of
4,102 ppm Li over 1 m at 32 m downhole;
- This drill hole
is now the westernmost drill hole reported at Falchani and extends
the drilled mineralization approximately 400 m further west;
and
- Mineralization
remains open at depth below 160 m.
- Drill hole
Pz10-TV intersected mineralization over the entire
160 m depth averaging 2,196 ppm Li, 713 ppm Cs, 1,126 ppm Rb and
2.63% K from 0-160 m downhole, ending in mineralization; See Table
2 – Drill Hole Pz10-TV results, below:
- A 74 m drill
interval from 21-95 m averaged 3,055 ppm Li, 577 ppm Cs, 1,217 ppm
Rb and 2.64% K;
- Maximum Li of
5,025 ppm Li over 1 m at 86 m downhole;
- Mineralization
remains open at depth below 160 m.
- Drill hole
Pz05-TV intersected mineralization over the entire
160 m depth averaging 1,683 ppm Li, 1,598 ppm Cs, 1,173 ppm Rb and
3.06% K from surface, ending in mineralization; See Table 3 – Drill
Hole Pz10-TV results, below:
- High grade Cs
was intersected over a 46.2 m interval from 104-150.2 m averaging
4,710 ppm Cs, 1,277 ppm Li, 1,083 ppm Rb and 2.71% K;
- Maximum Li of
3,282 ppm over 1 m at 149.2 m downhole;
- Maximum Cs of
8,290 ppm (0.83% Cs) over 1 m at 111.3 m downhole;
- Mineralization
remains open at depth below 160.15 m.
- Drill hole
Pz08-TV intersected mineralization from surface to
13 m averaging 2,486 ppm Li, 1,998 ppm Cs, 1,267 ppm Rb and 3.11% K
from 0-13 m downhole; the remainder of the drill hole intersected
subvolcanic rhyolitic intrusive rocks (see Table 4 – Drill Hole
Pz08-TV results below):
- A lower interval
within the subvolcanic rocks intersected 25 m averaging 1,094 ppm
Li, 1,081 ppm Cs, 569 ppm Rb and 3.55% K from 64-89 m.;
- Additional work
is being done on this style of lithium mineralization as it makes
up the “basement rock” of the main lithium-mineralized tuffs.
- Ground water has
yet to be encountered in any holes within the 160 m reporting drill
depth; EDASI and Company have requested permission from ANA to
drill deeper.
Figure 1 – Updated Falchani EIA Hydrology and
Previous Drill Hole Location Map
Hole Pz07-TV was drilled approximately 450 m
west of Platform 36 (Falchani West – 2020 drilling), the
westernmost holes from the 2020 resource drill program, expanding
the mineralized footprint extensively. Thick Li, Cs and Rb
mineralization was intersected in rhyolite tuff,
structural-hydrothermal breccia and subvolcanic rhyolitic intrusive
rocks directly at surface to 160 m downhole depth. In addition to
expanding the Falchani mineralization an additional 200 m to the
west of Pz04-TV (see July 12, 2023 news release) the drill hole
ended in mineralization, confirming mineralization remains open at
depth in this area.
Hole Pz10-TV was drilled approximately 50 m
southwest of Platform PCHAC-36 to investigate the water table in
this strongly mineralized area. The hole intersected similar
mineralization of Falchani tuff and lower brecciated units over the
entire 160 m drill hole.
Hole Pz05-TV was drilled in the central valley
in the central area of the Falchani resource footprint and provides
another window into the thick (>160 m) mineralization linking
the western and eastern portions of the Falchani deposit. The
intense brecciation in the lower portions of the drill hole hosts
higher grade Cs mineralization with lower Li contents.
Hole Pz08-TV was drilled along the southwestern
edge of the lithium mineralized outcrop area at Tres Hermanas.
While only 13 m of Falchani style mineralized brecciated tuff was
intersected, the basement subvolcanic rhyolitic intrusive rocks
encountered below do have highly anomalous Li contents, and this
appears to establish the southern limit of the interpreted Falchani
caldera system.
Table 1 – Drill Hole Pz07-TV
results
Pz07-TV – 160.0 m total depth reported –
Vertical |
From (m) |
To (m) |
Thickness (m) |
Li (ppm) |
Cs (ppm) |
Rb (ppm) |
K (%) |
|
0.0 |
160.0 |
160.0 |
1,817 |
780 |
965 |
3.00 |
including |
0.0 |
95.0 |
95.0 |
2,345 |
829 |
1,265 |
2.57 |
including |
0.0 |
42.0 |
42.0 |
3,246 |
602 |
1,342 |
2.75 |
Maximum Li interval |
32.0 |
33.0 |
1.0 |
4,102 |
|
|
|
Maximum Cs interval |
87.0 |
88.0 |
1.0 |
|
1,770 |
|
|
Maximum Rb interval |
68.0 |
69.0 |
1.0 |
|
|
1,595 |
|
Table 2 – Drill Hole Pz10-TV
results
Pz10-TV – 160.0 m total depth reported –
Vertical |
From (m) |
To (m) |
Thickness (m) |
Li (ppm) |
Cs (ppm) |
Rb (ppm) |
K (%) |
|
0.0 |
160.0 |
120.0 |
2,196 |
713 |
1,126 |
2.63 |
including |
21.0 |
95.0 |
74.0 |
3,055 |
577 |
1,217 |
2.64 |
Maximum Li interval |
86.0 |
87.0 |
1.0 |
5,025 |
|
|
|
Maximum Cs interval |
47.0 |
48.0 |
1.0 |
|
1,550 |
|
|
Maximum Rb interval |
116.0 |
117.0 |
1.0 |
|
|
1,901 |
|
Table 3 – Drill Hole Pz05-TV
results
Pz05-TV – 160.15 m total depth reported –
Vertical |
From (m) |
To (m) |
Thickness (m) |
Li (ppm) |
Cs (ppm) |
Rb (ppm) |
K (%) |
|
0.0 |
160.15 |
160.15 |
1,683 |
1,598 |
1,173 |
3.06 |
including |
0.0 |
16.0 |
16.0 |
2,348 |
439 |
1,558 |
3.14 |
including |
24.0 |
102.0 |
78.0 |
1,998 |
239 |
1,333 |
3.37 |
including |
104.0 |
150.2 |
46.2 |
1,277 |
4,710 |
1,083 |
2.71 |
Maximum Li interval |
149.2 |
150.2 |
1.0 |
3,282 |
|
|
|
Maximum Cs interval |
111.3 |
112.3 |
1.0 |
|
8,290 |
|
|
Maximum Rb interval |
39.0 |
40.0 |
1.0 |
|
|
1,837 |
|
Table 4 – Drill Hole Pz08-TV
results
Pz08-TV – 160.0 m total depth reported –
Vertical |
From (m) |
To (m) |
Thickness (m) |
Li (ppm) |
Cs (ppm) |
Rb (ppm) |
K (%) |
|
0.0 |
13.0 |
13.0 |
2,486 |
1,998 |
1,267 |
3.11 |
|
64.0 |
89.0 |
25.0 |
1,094 |
1,081 |
516 |
3.55 |
Maximum Li interval |
8.0 |
12.0 |
4.0 |
2,859 |
|
|
|
Maximum Cs interval |
8.0 |
12.0 |
4.0 |
|
3,060 |
|
|
Maximum Rb interval |
0.0 |
2.0 |
2.0 |
|
|
1,541 |
|
Quality Assurance, Quality Control and
Data VerificationDiamond drilling is being conducted using
Company-owned drill rigs with local contract personnel. Drill core
samples are cut longitudinally with a diamond saw, with one-half of
the core placed in sealed bags and shipped to Certimin’s sample
analytical laboratory in Lima for sample preparation, processing
and ICP-MS/OES multi-element analysis. Certimin is an ISO 9000
certified assay laboratory. The Company’s Qualified Person for the
drill program, Mr. Ted O’Connor, has verified the data disclosed,
including drill core, sampling and analytical data in the field and
laboratory. The program is designed to include a comprehensive
analytical quality assurance and control routine comprising the
systematic use of Company inserted standards, blanks and field
duplicate samples, internal laboratory standards and has also
included check analyses at other accredited laboratories. Downhole
thicknesses for vertical drill holes are considered accurate true
thickness intersections.
Qualified PersonMr. Ted
O’Connor, P.Geo., Executive Vice President of American Lithium, and
a Qualified Person as defined by National Instrument 43-101
Standards of Disclosure for Mineral Projects, has reviewed and
approved the scientific and technical information contained in this
news release.
About American
LithiumAmerican Lithium is actively engaged in the
development of large-scale lithium projects within mining-friendly
jurisdictions throughout the Americas. The Company is currently
focused on the continued development of its strategically located
TLC Lithium Claystone Project in the richly mineralized Esmeralda
lithium district in Nevada, as well as continuing to advance its
Falchani Hard-rock Lithium Project and Macusani Uranium Project in
southeastern Peru. All three projects, TLC, Falchani and Macusani
have been through robust preliminary economic assessments, exhibit
strong significant expansion potential and enjoy strong community
support. Pre-feasibility work is well advanced at Falchani and has
commenced at TLC.
For more information, please contact the Company
at info@americanlithiumcorp.com or visit our website
at www.americanlithiumcorp.com
Follow us
on Facebook, Twitter and LinkedIn.
On behalf of the Board of Directors of
American Lithium Corp.
“Simon Clarke”CEO & DirectorTel: 604 428 6128
For Media Inquiries:
Nancy ThompsonVorticom, Inc.212-532-2208
Neither the TSX Venture Exchange nor its
Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for
the adequacy or accuracy of this press release.
Cautionary Statement Regarding Forward
Looking InformationThis news release contains certain
forward-looking information and forward-looking statements
(collectively “forward-looking statements”) within the meaning of
applicable securities legislation. All statements, other than
statements of historical fact, are forward-looking statements.
Forward-looking statements in this news release include, but are
not limited to, statements regarding the ability to appeal the
judicial ruling, the anticipated completion of pre-feasibility
work, and any other statements regarding the business plans,
expectations and objectives of American Lithium. Forward-looking
statements are frequently identified by such words as "may",
"will", "plan", "expect", "anticipate", "estimate", "intend",
“indicate”, “scheduled”, “target”, “goal”, “potential”, “subject”,
“efforts”, “option” and similar words, or the negative connotations
thereof, referring to future events and results. Forward-looking
statements are based on the current opinions and expectations of
management and are not, and cannot be, a guarantee of future
results or events. Although American Lithium believes that the
current opinions and expectations reflected in such forward-looking
statements are reasonable based on information available at the
time, undue reliance should not be placed on forward-looking
statements since American Lithium can provide no assurance that
such opinions and expectations will prove to be correct. All
forward-looking statements are inherently uncertain and subject to
a variety of assumptions, risks and uncertainties, including risks,
uncertainties and assumptions related to: American Lithium’s
ability to achieve its stated goals, which could have a material
adverse impact on many aspects of American Lithium’s businesses
including but not limited to: the ability to access mineral
properties for indeterminate amounts of time, the health of the
employees or consultants resulting in delays or diminished
capacity, social or political instability in Peru which in turn
could impact American Lithium’s ability to maintain the continuity
of its business operating requirements, may result in the reduced
availability or failures of various local administration and
critical infrastructure, reduced demand for the American Lithium’s
potential products, availability of materials, global travel
restrictions, and the availability of insurance and the associated
costs; the judicial appeal process in Peru, and any and all future
remedies pursued by American Lithium and its subsidiary Macusani to
resolve the title for 32 of its concessions; the ongoing ability to
work cooperatively with stakeholders, including but not limited to
local communities and all levels of government; the potential for
delays in exploration or development activities; the interpretation
of drill results, the geology, grade and continuity of mineral
deposits; the possibility that any future exploration, development
or mining results will not be consistent with our expectations;
risks that permits will not be obtained as planned or delays in
obtaining permits; mining and development risks, including risks
related to accidents, equipment breakdowns, labour disputes
(including work stoppages, strikes and loss of personnel) or other
unanticipated difficulties with or interruptions in exploration and
development; risks related to commodity price and foreign exchange
rate fluctuations; risks related to foreign operations; the
cyclical nature of the industry in which American Lithium operates;
risks related to failure to obtain adequate financing on a timely
basis and on acceptable terms or delays in obtaining governmental
approvals; risks related to environmental regulation and liability;
political and regulatory risks associated with mining and
exploration; risks related to the uncertain global economic
environment and the effects upon the global market generally, any
of which could continue to negatively affect global financial
markets, including the trading price of American Lithium’s shares
and could negatively affect American Lithium’s ability to raise
capital and may also result in additional and unknown risks or
liabilities to American Lithium. Other risks and uncertainties
related to prospects, properties and business strategy of American
Lithium are identified in the “Risk Factors” section of American
Lithium’s Management’s Discussion and Analysis filed on May 29,
2023, and in recent securities filings available at www.sedar.com.
Actual events or results may differ materially from those projected
in the forward-looking statements. American Lithium undertakes no
obligation to update forward-looking statements except as required
by applicable securities laws. Investors should not place undue
reliance on forward-looking statements.
Cautionary Note Regarding Macusani
ConcessionsThirty-two of the 169 concessions held by
American Lithium’s subsidiary Macusani, are currently subject to
Administrative and Judicial processes (together, the “Processes”)
in Peru to overturn resolutions issued by INGEMMET and the Mining
Council of MINEM in February 2019 and July 2019, respectively,
which declared Macusani’s title to 32 of the concessions invalid
due to late receipt of the annual validity payments. In November
2019, Macusani applied for injunctive relief on 32 concessions in a
Court in Lima, Peru and was successful in obtaining such an
injunction on 17 of the concessions including three of the four
concessions included in the Macusani Uranium Project PEA. The grant
of the Precautionary Measure (Medida Cautelar) has restored the
title, rights and validity of those 17 concessions to Macusani
until a final decision is obtained at the last stage of the
judicial process. A Precautionary Measure application was made at
the same time for the remaining 15 concessions and was ultimately
granted by a Court in Lima, Peru on March 2, 2021 which has also
restored the title, rights and validity of those 15 remaining
concessions to Macusani, with the result being that all 32
concessions are now protected by Precautionary Measure (Medida
Cautelar) until a final decision on this matter is obtained at the
last stage of the judicial process. The favourable judge’s ruling
confirming title to all 32 concessions from November 3, 2021
represents the final stage of the current judicial process.
However, this ruling has recently been appealed by MINEM and
INGEMMET. American Lithium has no assurance that the outcome of
these appeals will be in the Company’s favour.
A photo accompanying this announcement is available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/7cdfcaac-e245-4e78-b1d2-9d0393b4748c
American Lithium (NASDAQ:AMLI)
Historical Stock Chart
From Nov 2024 to Dec 2024
American Lithium (NASDAQ:AMLI)
Historical Stock Chart
From Dec 2023 to Dec 2024