CDC Cadillac Ventures Inc

Cadillac Ventures Inc. (TSX VENTURE:CDC)(PINKSHEETS:CADIF) ("Cadillac" or the
"Company") is pleased to announce the results of the Scoping Level Flotation
Test work on copper-nickel-PGM ore from the K1-1 deposit, Thierry Project,
Northwestern Ontario. In December 2012, Cadillac collected a 30-35kg Mini Bulk
Sample from within the K1-1 Pit area, and a 30-35kg Mini Bulk Sample from
outside the K1-1 pit. A fulsome description of the sampling protocol and test
work done is detailed below. The results can be summarized as follows.


Metal Liberation

Copper liberation was excellent, with copper sulphides, occurring mainly as
chalcopyrite, 78% liberated in the pit area, and 75% liberated from the outside
pit sample. Nickel sulphides, occurring mainly as pentlandite, were 53%
liberated in the pit area, and 46% liberated outside the pit. It was also noted
that there is a high nickel content resident in pyrrhotite and pyrite; the
deliberate recovery of these by flotation will improve overall nickel recovery.


Test work grades better than Resource grades

The results of the Flotation Test work also demonstrate better grades than the
grades of the existing 43-101 Resource at K1-1. The current K1-1 resource is an
economic Whittle Pit inferred resource of 53.6 million tonnes at 0.38% Cu and
0.10% Ni. The in pit Mini Bulk Sample contained 0.52% Cu, 0.11% Ni, 0.068%
Ni(S), 0.31 g/t PGM (Pt+Pd+Au), and 2.6 g/t Ag, the outside pit Mini Bulk Sample
contained 0.46% Cu, 0.092% Ni, 0.058% Ni(S), 0.60 g/t PGM, and 2.0 g/t Ag.


Test work sample selection and preparation, processes

Representative samples for K1-1 ore, in pit and outside the pit, were determined
by P & E Mining Consultants Inc., the designers of the economic Whittle Pit in
place at K1-1. The identified core intercepts were identified in the field and
the core was quarter sawn, bagged and tagged under the supervision of Dr. Howard
Lahti P.Geo. The two mini-bulk samples were securely transported to the
facilities of SGS Minerals Services in Lakefield, Ontario. The test work
completed by SGS consisted of sample preparation, mineralogy characterization
and flotation testing. A total of twenty flotation tests and two locked cycle
tests were performed on the two Mini Bulk Samples.


Technical information in this press release has been reviewed and approved by
Brian H. Newton P.Geo, of Billiken Management Services Inc. and a "qualified
person" pursuant to the guidelines of National Instrument 43-101.


About Cadillac

Cadillac is a development-focused copper company currently advancing its 100%
owned Thierry Property, near Pickle Lake, Ontario. The Thierry Property consists
of the past producing Thierry Mine and hosts two NI 43-101 compliant resources:
Thierry Mine and K1-1.


In addition, Cadillac also holds a 51% interest in the Burnt Hill Project, a
historic tungsten/tin mine taken to test production by Mr. Norman Brewster P.Geo
for Canadian International Paper during the early 1980's. Cadillac looks forward
to resuming the development of this project.


For more information regarding Cadillac, please visit the Company's website at
www.cadillacventures.com.


Neither TSX Venture Exchange nor its Regulation Services Provider (as that term
is defined in the policies of the TSX Venture Exchange) accepts responsibility
for the adequacy or accuracy of this release.


FOR FURTHER INFORMATION PLEASE CONTACT: 
Cadillac Ventures Inc.
Norman Brewster
President and Chief Executive Officer
416 203-7722
www.cadillacventures.com

Cadillac Ventures (TSXV:CDC)
Historical Stock Chart
From Mar 2024 to Apr 2024

Cadillac Ventures (TSXV:CDC)
Historical Stock Chart
From Apr 2023 to Apr 2024