Wesdome Gold Mines Ltd. (TSX:WDO, OTCQX:WDOFF)
(“
Wesdome” or the “
Company”)
today provides an update on the underground and surface exploration
programs (Figure 1) at its 100%-owned Kiena Mine
(“
Kiena”) in Val-d’Or, Québec.
Ms. Anthea Bath, President and Chief Executive
Officer, stated: “This year’s exploration budget for Kiena of over
$20 million covered surface and underground expansion, infill and
delineation drilling totaling more than 70,000 metres. This robust
program has yielded impressive results across various zones at
Kiena, underscoring its prospectivity and long-term potential.
These latest drill results support both our fill the mill and
two-mine structure initiatives, where high-grade production from
Kiena Deep leverages existing shaft infrastructure, supplemented by
near-surface feed transported from the 33-level via the Presqu’île
ramp.
“Drilling in the Footwall Zone of Kiena Deep has
yielded promising results, supporting the conversion of resources
to the indicated category at higher than expected grades. These
results not only strengthen our understanding of the geology but
also reinforce the potential to expand this high-grade zone. Given
the proximity and continuity of this mineralization, the Footwall
Zone may be integrated earlier into the life of mine plan. Drilling
at depth below Kiena Deep also continues to confirm that high-grade
mineralization extends to at least 1,875 metres below surface. In
2025, Wesdome is planning to establish an additional platform on
134-level to further test the structure down-plunge.
“Results from both the Presqu’île and Dubuisson
zones are also highly encouraging with the success of the Dubuisson
infill program expected to support a year-end initial reserve
estimate. Our team’s execution during a limited seasonal barge
drilling window allowed us to increase drill metres significantly
across both the Dubuisson Northern and Southern zones, as well as
Presqu’île. These zones hold strategic importance, leveraging
existing 33-level development to potentially enhance operational
flexibility, increase mill utilization and materially reduce
overall mine unit costs. The extension of down-plunge growth at
Presqu’île, where stope production is scheduled to commence in late
2025, is poised to establish it as an important new mining front.
This progress has also enabled us to test the down-plunge extension
at Dubuisson and advance infill drilling to support resource
conversion at Presqu’île.”
Highlights
Kiena Deep - Footwall Zone (Figure 2,
Table 1) 1Footwall Zone continues
to showcase mineralization at grades above current
resource:
- Hole N127-6894: 218.9 g/t Au over
22.1m core length (30.3 g/t Au capped, 6.0m true width) including
- 988.0 g/t Au uncapped over 1.0m
core length (90.0 g/t Au capped, 0.3m true width)
- 1,920.0 g/t Au uncapped over 0.8m
core length (90.0 g/t Au capped, 0.2m true width)
- Hole N127-6893: 49.7 g/t Au
uncapped over 13.5m core length (31.7 g/t Au capped, 5.3m true
width)
- Hole N127-6915: 18.1 g/t Au
uncapped over 10.6m core length (18.1 g/t Au capped, 7.0m true
width)
Kiena Deep Extension (Figure 2, Table
1) 1Follow-up drilling
down-plunge at Kiena Deep confirms high-grade
mineralization:
- Hole N103-6840W7: 84.3 g/t Au
uncapped over 5.0m core length (63.6 g/t Au capped, 3.8m true
width)
Presqu’île Zone (Figure 3, Table
1) 1 Infill drilling has
intersected mineralization with visible gold:
- Hole PR-24-088: 62.1 g/t Au
uncapped over 3.0m core length (42.3 g/t Au capped, 2.6m true
width)
- Hole PR-24-089: 33.0 g/t Au
uncapped over 2.6m core length (33.0 g/t Au capped, 2.3m true
width)
Dubuisson Zone (Figure 4, Table
1) 1,3 Infill
and down-plunge drilling confirm continuity of the
deposit:
- Hole DB-24-022: 9.5g/t Au uncapped
over 3.2m core length
- Hole DB-24-023: 18.1g/t Au uncapped
(16.8g/t Au capped) over 5.9m core length
- Hole DB-24-024: 9.1 g/t Au uncapped
over 19.5m core length
Duchesne Zone (Figure 5, Table
1) 1 Drilling has helped to
improve understanding of the historical zone:
- Hole DU-24-003: 24.4g/t Au uncapped
(19.2g/t Au capped) over 3.2m core length3
Wish Area (Figure 5, Table 1)
2Exploration drilling aimed at the
down-plunge extension of Wish intersected high-grade
mineralization:
- Hole N033-6904: 26.3 g/t Au
uncapped over 3.5m core length
Northwest Zone (Figure 6, Table
1) 1Unexpectedly, drilling
intersected high-grade mineralization to the north, while targeting
the zone at depth:
- Hole: NW-24-005: 93.0g/t Au
uncapped (24.8 g/t Au capped) over 2.9m core
length3
1 Assays capped at 90.0 g/t Au. 2 Assays for
Wish Zone capped at 35g/t Au.3 True width is unavailable at this
time.
Technical Details
Underground Exploration
Drilling
Kiena Deep – Footwall Zone
In recent years, underground drilling efforts
have primarily focused on areas around the Kiena Deep A Zone. A
significant early achievement was the discovery of the Footwall
Zone in 2021.
The Footwall Zone comprises several folded
parallel veins in the footwall of Kiena Deep with widths ranging
from 2 to 7 metres. The gold mineralization in this zone closely
resembles that of Kiena Deep, featuring visible gold within quartz
veins hosted by ultramafic rock in contact with mafic rock. These
highly mineralized veins have the potential to be mined as a single
unit from the same development level, which could enhance overall
vertical ounces per metre. The recent establishment of the
127-level drill platform has improved the drilling angle towards
the Footwall Zone with most 2024 drilling activities directed at
this zone within the Kiena Deep orebody.
To date in 2024, 14,000 metres of drilling in 48
drillholes has been completed within the Kiena Deep area, including
10,000 metres of infill drilling across 40 holes targeting the
Footwall Zone. By the end of 2024, an additional five holes, or
2,000 metres, are planned for the Footwall Zone with a focus on
upgrading the inferred resources. Additionally, the incremental
drilling is expected to provide essential information that improves
our understanding of the geometry of the zone and its relationship
to the Kiena Deep A Zone.
Kiena Deep Extension
Assay results from hole N103-6840W7, which was
drilled from the 103-level platform to explore the down-plunge
extension of the Kiena Deep South Limb, have confirmed the findings
of previous drillholes. These intersections, together with the
latest results, have extended the vertical reach of the Kiena Deep
deposit by approximately 125 metres.
VC Zone Proposed Drilling
The 2024 underground program includes plans to
develop an exploration drift from the 109-level toward the VC Zone
by the end of the year. Drilling from this platform will evaluate
the continuity and potential extensions of the VC Zone, which is
near hole 6531 that was completed in 2019. This hole returned a
remarkable value of 43.6 g/t Au uncapped over 5.1m core length,
including 178.5 g/t uncapped over 1.1m core length and visible gold
present. The mineralization observed in this area is similar to
that found in Kiena Deep, characterized by a stockwork of quartz
veins located at the lower contact between basalt and schist
lithological units. In addition to focusing on the VC Zone, we will
also target underexplored adjacent areas.
Furthermore, a hanging wall exploration drift
from the 134-level is planned for completion in 2025. This drift is
expected to facilitate targeting and drilling at greater depths to
confirm the extensions of the hanging wall Basalt Zone and Footwall
Zone.
Wish Area
A top priority for 2024 has been the exploration
of the Wish Area. In this underexplored region, 40 drillholes have
been completed, totaling 9,950 metres. Initial drilling, which
started from the existing 33-level development into the Wish Area,
has revealed mineralization within quartz veins in a strong basalt
horizon that is in contact with sheared ultramafic rocks. These
lithological contacts are favorable for mineralization.
The initial results are promising, including an
intercept of 36.4 g/t Au over 1.5m core length from hole N033-6901.
Additionally, historic hole 4344 returned 65.5 g/t Au over 1.0m
core length (see the Company’s press release dated April 8, 2024).
These results highlight the potential of this underexplored area at
Kiena.
Follow-up drilling is targeting several
promising locations, including the down-plunge section of the Wish
Area, where recent drilling recorded 26.3 g/t Au over 3.5m core
length in Hole N033-6904.
With limited drilling completed so far,
extending exploration into the Wish Area and areas to the north
remains a priority. Due to the ongoing success in exploration, an
additional 2,000 metres of drilling has been authorized for 2024 in
this region.
Surface Program
Presqu’île Deposit
The expanded 2024 drill program for the
Presqu’île orebody consists of 6,600 budgeted metres across 20
holes. The primary aim is to test the lateral and down-plunge
extensions of zones No. 2 and No. 2A, with seven of the holes
specifically targeting inferred resources for potential upgrading.
Preliminary assay results from infill drillhole PR-24-088 revealed
high-grade mineralization, showcasing visible gold and yielding an
impressive 42.3 g/t Au (capped) over a true width of 2.6m (see
Table 1). This encouraging outcome underscores the potential for
conversion to reserves at year-end.
In 2025, we plan to continue targeting lateral
and depth extensions from the surface. By the end of Q1 2025, we
anticipate that the development of the Presqu’île ramp will have
progressed sufficiently to establish a drilling platform to
commence underground delineation of the zone.
Dubuisson Deposit
The exploration drilling program planned for
2024 originally involved 7,500 metres of drilling to upgrade
resources in the Northern and Southern zones at the Dubuisson
deposit, and to delineate the geometry of the ore zone. Based on
drilling to date, the program at Dubuisson, which was expanded to
12,000 metres across 38 holes, confirmed the continuity of the
deposit, facilitated resource upgrades and enabled down-plunge
extension testing of the deposit, highlighting potential for
higher-grade zones.
The deposit is understood to have a combination
of shallow-dipping and steep-dipping veins within sheared,
carbonatized and chloritized intrusions (diorite) along with
brittle feldspar porphyry dykes that crosscut broadly deformed
ultramafic rocks. Results to date from the 2024 drill program
(Table 1) confirm this interpretation and the extension of the
Dubuisson deposit with one hole (DB-24-024) yielding 9.1 g/t Au
over a core length of 19.5m, and another hole (DB-24-023) showing
18.1 g/t Au over a core length of 5.9m. These results are being
incorporated into an updated model to enable interpretation of a
true width.
The 2025 drilling program will aim to upgrade
the mineral resource categories and to test both the lateral and
down-plunge extensions of the zone.
Duchesne Zone
In 2024, a small drill program totaling 1,880
metres was completed in the Duchesne Zone to enhance the
understanding and confirm the continuity of the zone, which is
located approximately 500 metres south of the 33-level
infrastructure. Duchesne consists of gold-bearing and brecciated
quartz-pyrite veins associated with three separated shear zones
crosscutting mafic volcanic rocks (basalt) that exhibit silicate,
carbonate and chlorite alteration. An ongoing structural
interpretation from an optical and acoustic borehole survey
suggests that shear zones and gold-bearing veins are subvertical
and strike northeast-southwest.
Initial results from the 2024 drilling program
show that high-grade gold intersections were obtained in at least
three drillholes (see Table 1), including one intersection of 24.4
g/t Au over a core length of 3.2m in hole DU-24-003.
These findings will assist the team in refining
the initial geological interpretation of the zone, with completion
expected during the winter season. Additionally, a more extensive
surface drilling program is planned for 2025 to explore the
potential extension of the zone and clarify its geometry.
Northwest Zone
The Northwest Zone was discovered in 1986.
Between 1987 and 1989, follow-up drilling from surface confirmed
the extension of this zone yielding results in hole S279 with 2.1
g/t Au over 3.4m and 3.0 g/t Au over 2.0m, and hole 1480 (13.1 g/t
Au over 1.9m) from underground.
Various drilling campaigns have been conducted
over time including limited drilling in 2008 and a more extensive
15-hole campaign in 2011. Significant gold intercepts during these
campaigns confirmed the internal geometry and continuity of the
Northwest Zone. A limited program in 2023 testing the lateral
extension east and west of the Northwest Zone had positive results
in Hole S-23-857 with 31.5 Au g/t over 3.2m showing the potential
of the zone.
Follow-up drilling in 2024 unexpectedly
intersected high-grade mineralization to the north, while targeting
the Northwest Zone at depth. Drillhole NW 24-005 yielded an
encouraging 93.0 g/t over a core length of 2.9m, including 337 g/t
Au uncapped over 0.8m core length from approximately 135 metres
downhole. Mineralization was proximal to a diorite and komatiite
contact within a brecciated quartz-carbonate-chlorite veins
associated with 5% pyrite and 1% pyrrhotite and included visible
gold.
The 2024 exploration program aimed to target the
down-plunge extension of the zone towards the southeast. Expanding
the resource in the Northwest Zone could be meaningful as it lies
400 metres north of the planned Presqu’île ramp, placing the zone
close to infrastructure. Assays from 10 holes drilled in 2024,
including the remainder of hole NW 24-005, are currently
pending.
Northeast Zone
As part of this summer’s barge drilling program,
Wesdome completed a limited exploration initiative consisting of 10
holes, totalling approximately 3,500 metres, targeting the
Northeast Zone. Located north of the Kiena mine, historic
drillholes in this area showed promising results. With additional
drilling in 2024 our goal was to confirm the continuity of this
zone. The Northeast Zone comprises two main areas within
northwest-southeast trending shear zones, alongside a third area
associated with an east-west trending fault. The
northwest-southeast trending mineralization is found within a
stockwork of carbonate-chlorite ± albite related to a diorite dyke
that intersects schistose mafic to ultramafic rocks. In contrast,
the east-west trending veins are linked with chlorite + biotite ±
silica veins, which include pyrite-pyrrhotite sulphides related to
the mineralization. Assays from all holes drilled at the Northeast
Zone in 2024 are pending.
About Wesdome
Wesdome is a Canadian-focused gold producer with
two high-grade underground assets, the Eagle River mine in Ontario
and the Kiena mine in Quebec. The Company’s primary goal is to
responsibly leverage this operating platform and high-quality
brownfield and greenfield exploration pipeline to build Canada’s
next intermediate gold producer.
For further information, please
contact:Raj Gill, SVP, Corporate Development &
Investor RelationsTrish Moran, VP, Investor RelationsPhone: +1
(416) 360-3743E-Mail: invest@wesdome.com
Technical DisclosureThe
technical and geoscientific content of this release has been
compiled, reviewed, and approved by Bruno Turcotte, P.Geo., (OGQ
#453) Geology Superintendent of the Kiena mine, and Denys Vermette,
P. Geo, (OGQ #564) Surface Exploration Manager, each a "Qualified
Person" as defined in National Instrument 43-101 - Standards of
Disclosure for Mineral Projects.
Analytical work was performed by ALS Minerals of
Val-d’Or (Quebec), a certified commercial laboratory (Accredited
Lab #689). Sample preparation was completed at ALS Minerals in Val
d'Or (Quebec). Assaying comprised fire assay methods with an atomic
absorption finish. Any sample assaying >10 g/t Au was re-run
using the fire assay method with gravimetric finish, and also with
the metallic sieve method. In addition to laboratory internal
duplicates, standards, and blanks, the geology department inserts
blind duplicates, standards, and blanks into the sample stream at a
frequency of one in twenty to monitor quality control.
Forward-Looking Information
This press release contains "forward-looking
information" within the meaning of applicable Canadian securities
legislation, including but not limited to statements regarding:
Wesdome's exploration activities, budget allocations and
operational plans at the Kiena Mine; the prospectivity and
potential life of the Kiena Mine; resource conversion and
expansion, and associated grades of the deposit at the Kiena Mine;
the expansion and integration of certain mining zones at the Kiena
Mine into the life of mine plan; the operational flexibility and
optimization at Kiena that leverages existing infrastructure to
lower costs; the planned additional drilling platforms to be added
in the future; the timing of initial reserve estimates; the
potential reduction in overall mine unit costs; and the schedule of
potential future stope production and potential new mining fronts.
Forward-looking statements are based on the opinions and estimates
of management as of the date such statements are made and they are
subject to known and unknown risks, uncertainties, and other
factors that may cause the actual results, level of activity,
performance or achievements of Wesdome to be materially different
from those expressed or implied by such forward-looking statements
or forward-looking information. Although management of Wesdome has
attempted to identify important factors that could cause actual
results to differ materially from those contained in
forward-looking statements or forward-looking information, there
may be other factors that cause results not to be as anticipated,
estimated or intended.
There can be no assurance that forward-looking
statements or information will prove to be accurate, as actual
results and future events could differ materially from those
anticipated in such statements. The Company undertakes no
obligation to update forward-looking statements if circumstances,
management’s estimates or opinions should change, except as
required by securities legislation. Accordingly, the reader is
cautioned not to place undue reliance on forward-looking
statements.
Figure 1 – Kiena Southern Corridor Plan
View
Figure 2 – Kiena Deep Section View
Looking Southwest
Figure 3 – Presqu’île Zone Section View Looking
East-Northeast
Figure 4 – Dubuisson Section View Looking
North
Figure 5 – Duchesne-Wish Plan View
Figure 6 – Northwest Plan View
Table 1: Kiena Drill Results (Previously
Unreleased)
Composite ResultsFigures in
table may not add due to rounding.
Hole No. |
From (m) |
To (m) |
Core Length (m) |
Estimated True Width (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Target |
Wish Area |
N033-6903 |
122.3 |
128.2 |
5.9 |
- |
10.66 |
10.66 |
Wish Area |
N033-6904 |
272.5 |
276.0 |
3.5 |
- |
26.33 |
26.33 |
Wish |
South Limb |
N103-6840W7 |
273.0 |
278.0 |
5.0 |
3.8 |
84.27 |
63.57 |
A Zone |
N103-6918W2 |
330.4 |
333.7 |
3.3 |
3.2 |
10.59 |
10.59 |
A Zone |
Footwall |
N127-6893 |
260.0 |
269.0 |
9.0 |
3.4 |
8.22 |
8.22 |
BZA_1 |
N127-6893 |
276.4 |
285.4 |
9.0 |
5.2 |
13.72 |
13.72 |
A Zone |
N127-6893 |
335.0 |
348.5 |
13.5 |
5.3 |
49.67 |
31.71 |
FWZ_1 |
N127-6894 |
326.0 |
331.1 |
5.1 |
1.5 |
9.70 |
9.70 |
A Zone |
N127-6894 |
340.0 |
362.1 |
22.1 |
6.0 |
218.87 |
30.27 |
A1 Zone |
N127-6895 |
342.7 |
348.9 |
6.2 |
4.6 |
47.13 |
14.09 |
A1 Zone |
N127-6895 |
389.0 |
392.8 |
3.8 |
2.7 |
8.28 |
8.28 |
FWZ_1 |
N127-6895 |
406.5 |
410.1 |
3.6 |
2 |
21.98 |
21.98 |
FWZ_2 |
N127-6895 |
416.7 |
420.2 |
3.5 |
2.2 |
6.97 |
6.97 |
FWZ_3 |
N127-6897 |
363.9 |
368.9 |
5.0 |
3.8 |
18.61 |
18.61 |
A1 Zone |
N127-6898 |
370.3 |
377.0 |
6.7 |
3.7 |
27.56 |
24.68 |
A1 Zone |
N127-6915 |
247.1 |
251.8 |
4.7 |
3.7 |
16.17 |
11.91 |
A Zone |
N127-6915 |
323.3 |
333.9 |
10.6 |
7.0 |
18.07 |
18.07 |
FWZ_3 |
N127-6917 |
261.7 |
266.3 |
4.6 |
2.9 |
14.45 |
12.06 |
A Zone |
N127-6929 |
240.0 |
243.0 |
3.0 |
2.9 |
11.13 |
11.13 |
A Zone |
N127-6929 |
260.0 |
263.8 |
3.8 |
3.6 |
25.84 |
24.08 |
A1 Zone |
Dubuisson |
DB-24-015 |
141.9 |
149.9 |
8.0 |
- |
12.50 |
8.49 |
DUB_N1 |
DB-24-015 |
426.5 |
435.4 |
8.9 |
- |
3.79 |
3.79 |
DUB_N |
DB-24-016 |
234.8 |
238.2 |
3.4 |
- |
4.03 |
4.03 |
DUB_N1 |
DB-24-019 |
59.5 |
65.5 |
6.0 |
- |
6.30 |
6.30 |
DUB_N2 |
DB-24-021 |
162.0 |
169.0 |
7.0 |
- |
10.36 |
8.09 |
DUB_S2 |
DB-24-022 |
59.8 |
63.0 |
3.2 |
- |
9.45 |
9.45 |
DUB_S1 |
DB-24-022 |
292.2 |
295.3 |
3.1 |
- |
5.27 |
5.27 |
DUB_S1 |
DB-24-022 |
342.1 |
346.5 |
4.4 |
- |
5.57 |
5.57 |
DUB_S2 |
DB-24-023 |
194.4 |
200.3 |
5.9 |
- |
18.11 |
16.75 |
DUB_S3 |
DB-24-024 |
83.8 |
103.3 |
19.5 |
- |
9.10 |
9.10 |
DUB_S1 |
DB-24-029 |
298.2 |
317.7 |
19.5 |
- |
5.71 |
5.39 |
DUB_S4 |
Hole No. |
From (m) |
To (m) |
Core Length (m) |
Estimated True Width (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Target |
Duchesne |
DU-24-001 |
255.4 |
257.5 |
2.1 |
- |
6.37 |
6.37 |
DUC Area |
DU-24-003 |
140.2 |
143.4 |
3.2 |
- |
24.40 |
19.24 |
DUC Area |
DU-24-004 |
223.4 |
226.5 |
3.1 |
- |
4.72 |
4.72 |
DUC Area |
Northwest |
NW-24-005 |
134.4 |
137.3 |
2.9 |
- |
92.97 |
24.83 |
NW Area |
Presqu’île |
PR-24-088 |
226.4 |
229.4 |
3.0 |
2.6 |
62.12 |
42.29 |
PR-2A |
PR-24-089 |
233.4 |
236.0 |
2.6 |
2.3 |
32.95 |
32.95 |
PR-2A |
Assay Results
Figures in table may not add due to
rounding.
Hole ID |
Target |
From(m) |
To(m) |
CoreLength(m) |
AuUncut(g/t) |
AuCut(g/t) |
N033-6903 |
Wish Area |
122.3 |
123.1 |
0.8 |
65.40 |
65.40 |
N033-6903 |
Wish Area |
123.1 |
123.9 |
0.8 |
0.26 |
0.26 |
N033-6903 |
Wish Area |
123.9 |
124.9 |
1.0 |
0.05 |
0.05 |
N033-6903 |
Wish Area |
124.9 |
125.9 |
1.0 |
1.09 |
1.09 |
N033-6903 |
Wish Area |
125.9 |
127.2 |
1.3 |
1.99 |
1.99 |
N033-6903 |
Wish Area |
127.2 |
128.2 |
1.0 |
6.66 |
6.66 |
N033-6904 |
Wish Zone |
272.5 |
273.5 |
0.9 |
0.76 |
0.76 |
N033-6904 |
Wish Zone |
273.5 |
274.3 |
0.9 |
0.48 |
0.48 |
N033-6904 |
Wish Zone |
274.3 |
275.3 |
0.9 |
21.10 |
21.10 |
N033-6904 |
Wish Zone |
275.3 |
276.0 |
0.9 |
33.80 |
33.80 |
N103-6840W7 |
A Zone |
273 |
274 |
1.0 |
40.30 |
40.30 |
N103-6840W7 |
A Zone |
274.0 |
275.0 |
1.0 |
124.00 |
90.00 |
N103-6840W7 |
A Zone |
275.0 |
276.0 |
1.0 |
114.50 |
90.00 |
N103-6840W7 |
A Zone |
276.0 |
276.9 |
0.9 |
140.00 |
90.00 |
N103-6840W7 |
A Zone |
276.9 |
278.0 |
1.1 |
15.05 |
15.05 |
N103-6918W2 |
A Zone |
330.4 |
331.9 |
1.5 |
0.05 |
0.05 |
N103-6918W2 |
A Zone |
331.9 |
332.6 |
0.7 |
46.30 |
46.30 |
N103-6918W2 |
A Zone |
332.6 |
333.7 |
1.1 |
2.25 |
2.25 |
N127-6893 |
BZA1 Zone |
260.0 |
261.0 |
1.0 |
17.95 |
17.95 |
N127-6893 |
BZA1 Zone |
261.0 |
262.0 |
1.0 |
1.46 |
1.46 |
N127-6893 |
BZA1 Zone |
262.0 |
263.0 |
1.0 |
1.11 |
1.11 |
N127-6893 |
BZA1 Zone |
263.0 |
264.0 |
1.0 |
2.64 |
2.64 |
N127-6893 |
BZA1 Zone |
264.0 |
265.0 |
1.0 |
3.53 |
3.53 |
N127-6893 |
BZA1 Zone |
265.0 |
266.0 |
1.0 |
13.05 |
13.05 |
N127-6893 |
BZA1 Zone |
266.0 |
267.0 |
1.0 |
1.20 |
1.20 |
N127-6893 |
BZA1 Zone |
267.0 |
268.0 |
1.0 |
2.31 |
2.31 |
N127-6893 |
BZA1 Zone |
268.0 |
269.0 |
1.0 |
30.70 |
30.70 |
N127-6893 |
A Zone |
276.4 |
277.4 |
1.0 |
24.50 |
24.50 |
N127-6893 |
A Zone |
277.4 |
278.4 |
1.0 |
32.70 |
32.70 |
N127-6893 |
A Zone |
278.4 |
279.4 |
1.0 |
8.53 |
8.53 |
N127-6893 |
A Zone |
279.4 |
280.4 |
1.0 |
24.00 |
24.00 |
N127-6893 |
A Zone |
280.4 |
281.4 |
1.0 |
13.35 |
13.35 |
N127-6893 |
A Zone |
281.4 |
282.4 |
1.0 |
6.52 |
6.52 |
N127-6893 |
A Zone |
282.4 |
283.4 |
1.0 |
2.65 |
2.65 |
N127-6893 |
A Zone |
283.4 |
284.4 |
1.0 |
3.60 |
3.60 |
N127-6893 |
A Zone |
284.4 |
285.4 |
1.0 |
7.66 |
7.66 |
N127-6893 |
FWZ_1 Zone |
335.0 |
336.0 |
1.0 |
22.40 |
22.40 |
N127-6893 |
FWZ_1 Zone |
336.0 |
337.0 |
1.0 |
5.30 |
5.30 |
N127-6893 |
FWZ_1 Zone |
337.0 |
338.0 |
1.0 |
0.47 |
0.47 |
N127-6893 |
FWZ_1 Zone |
338.0 |
338.8 |
0.8 |
16.20 |
16.20 |
N127-6893 |
FWZ_1 Zone |
338.8 |
339.3 |
0.5 |
0.43 |
0.43 |
N127-6893 |
FWZ_1 Zone |
339.3 |
340.1 |
0.8 |
105.50 |
90.00 |
N127-6893 |
FWZ_1 Zone |
340.1 |
341.0 |
0.9 |
1.26 |
1.26 |
N127-6893 |
FWZ_1 Zone |
341.0 |
341.7 |
0.7 |
53.30 |
53.30 |
N127-6893 |
FWZ_1 Zone |
341.7 |
342.3 |
0.6 |
5.16 |
5.16 |
N127-6893 |
FWZ_1 Zone |
342.3 |
343.5 |
1.2 |
11.15 |
11.15 |
N127-6893 |
FWZ_1 Zone |
343.5 |
346.7 |
1.2 |
6.73 |
6.73 |
N127-6893 |
FWZ_1 Zone |
346.7 |
347.5 |
1.2 |
143.00 |
90.00 |
N127-6893 |
FWZ_1 Zone |
347.5 |
346.7 |
0.8 |
298.00 |
90.00 |
N127-6893 |
FWZ_1 Zone |
346.7 |
347.5 |
0.8 |
78.60 |
78.60 |
N127-6893 |
FWZ_1 Zone |
347.5 |
348.5 |
1.0 |
8.92 |
8.92 |
N127-6894 |
A Zone |
326.0 |
326.5 |
0.5 |
58.00 |
58.00 |
N127-6894 |
A Zone |
326.5 |
327.2 |
0.7 |
0.54 |
0.54 |
N127-6894 |
A Zone |
327.2 |
328.4 |
1.2 |
0.13 |
0.13 |
N127-6894 |
A Zone |
328.4 |
329.4 |
1.0 |
13.00 |
13.00 |
N127-6894 |
A Zone |
329.4 |
330.1 |
0.7 |
1.74 |
1.74 |
N127-6894 |
A Zone |
330.1 |
331.1 |
1.0 |
5.72 |
5.72 |
N127-6894 |
A1 Zone |
340.0 |
341.1 |
1.1 |
144.50 |
90.00 |
N127-6894 |
A1 Zone |
341.1 |
342.0 |
0.9 |
0.76 |
0.76 |
N127-6894 |
A1 Zone |
342.0 |
342.9 |
0.9 |
2.46 |
2.46 |
N127-6894 |
A1 Zone |
342.9 |
343.9 |
1.0 |
8.49 |
8.49 |
N127-6894 |
A1 Zone |
343.9 |
345.3 |
1.4 |
2.84 |
2.84 |
N127-6894 |
A1 Zone |
345.9 |
346.4 |
0.5 |
9.12 |
9.12 |
N127-6894 |
A1 Zone |
346.4 |
347.4 |
1.0 |
16.00 |
16.00 |
N127-6894 |
A1 Zone |
347.4 |
348.4 |
1.0 |
25.40 |
25.40 |
N127-6894 |
A1 Zone |
348.9 |
350.4 |
1.5 |
1.71 |
1.71 |
N127-6894 |
A1 Zone |
350.4 |
351.4 |
1.0 |
3.38 |
3.38 |
N127-6894 |
A1 Zone |
351.4 |
352.4 |
1.0 |
988.00 |
90.00 |
N127-6894 |
A1 Zone |
352.4 |
353.2 |
0.8 |
1920.00 |
90.00 |
N127-6894 |
A1 Zone |
353.2 |
354.0 |
0.8 |
72.50 |
72.50 |
N127-6894 |
A1 Zone |
354.0 |
355.5 |
1.5 |
0.47 |
0.47 |
N127-6894 |
A1 Zone |
355.5 |
356.5 |
1.0 |
1.91 |
1.91 |
N127-6894 |
A1 Zone |
356.5 |
357.4 |
0.9 |
0.84 |
0.84 |
N127-6894 |
A1 Zone |
357.4 |
358.3 |
0.9 |
38.80 |
38.80 |
N127-6894 |
A1 Zone |
358.3 |
359.3 |
1.0 |
54.30 |
54.30 |
N127-6894 |
A1 Zone |
359.3 |
360.3 |
1.0 |
1195.00 |
90.00 |
N127-6894 |
A1 Zone |
360.3 |
361.3 |
1.0 |
731.00 |
90.00 |
N127-6894 |
A1 Zone |
361.3 |
362.1 |
0.8 |
10.70 |
10.70 |
N127-6895 |
A1 Zone |
342.7 |
344.2 |
1.5 |
6.32 |
6.32 |
N127-6895 |
A1 Zone |
344.2 |
345.3 |
1.1 |
0.19 |
0.19 |
N127-6895 |
A1 Zone |
345.3 |
346.3 |
1.0 |
0.50 |
0.50 |
N127-6895 |
A1 Zone |
346.3 |
347.3 |
1.0 |
0.59 |
0.59 |
N127-6895 |
A1 Zone |
347.3 |
348.1 |
0.8 |
5.75 |
5.75 |
N127-6895 |
A1 Zone |
348.1 |
348.9 |
0.8 |
346.00 |
90.00 |
N127-6895 |
FWZ_1 Zone |
389.0 |
389.9 |
0.9 |
1.42 |
1.42 |
N127-6895 |
FWZ_1 Zone |
389.9 |
390.8 |
0.9 |
30.40 |
30.40 |
N127-6895 |
FWZ_1 Zone |
390.8 |
391.8 |
1.0 |
1.67 |
1.67 |
N127-6895 |
FWZ_1 Zone |
391.8 |
392.8 |
1.0 |
1.18 |
1.18 |
N127-6895 |
FWZ_2 Zone |
406.5 |
407.5 |
1.0 |
1.21 |
1.21 |
N127-6895 |
FWZ_2 Zone |
407.5 |
409.0 |
1.5 |
3.56 |
3.56 |
N127-6895 |
FWZ_2 Zone |
409.0 |
410.1 |
1.1 |
66.00 |
66.00 |
N127-6895 |
FWZ_3 Zone |
416.7 |
417.7 |
1.0 |
16.20 |
16.20 |
N127-6895 |
FWZ_3 Zone |
417.7 |
418.7 |
1.0 |
6.23 |
6.23 |
N127-6895 |
FWZ_3 Zone |
418.7 |
420.2 |
1.5 |
1.32 |
1.32 |
N127-6897 |
A1 Zone |
363.9 |
364.9 |
1.0 |
26.20 |
26.20 |
N127-6897 |
A1 Zone |
364.9 |
365.9 |
1.0 |
61.90 |
61.90 |
N127-6897 |
A1 Zone |
365.9 |
366.9 |
1.0 |
0.59 |
0.59 |
N127-6897 |
A1 Zone |
366.9 |
367.9 |
1.0 |
1.34 |
1.34 |
N127-6897 |
A1 Zone |
367.9 |
368.9 |
1.0 |
3.02 |
3.02 |
N127-6898 |
A1 Zone |
370.3 |
371.4 |
1.1 |
107.50 |
90.00 |
N127-6898 |
A1 Zone |
371.4 |
372.4 |
1.0 |
0.05 |
0.05 |
N127-6898 |
A1 Zone |
372.4 |
373.2 |
0.8 |
0.07 |
0.07 |
N127-6898 |
A1 Zone |
373.2 |
374.0 |
0.8 |
70.10 |
70.10 |
N127-6898 |
A1 Zone |
374.0 |
375.0 |
1.0 |
0.26 |
0.26 |
N127-6898 |
A1 Zone |
375.0 |
376.0 |
1.0 |
2.11 |
2.11 |
N127-6898 |
A1 Zone |
376.0 |
377.0 |
1.0 |
7.82 |
7.82 |
N127-6915 |
A Zone |
247.1 |
247.6 |
0.5 |
68.60 |
68.60 |
N127-6915 |
A Zone |
247.6 |
248.6 |
1.0 |
0.49 |
0.49 |
N127-6915 |
A Zone |
248.6 |
249.6 |
1.0 |
4.62 |
4.62 |
N127-6915 |
A Zone |
249.6 |
250.6 |
1.0 |
2.38 |
2.38 |
N127-6915 |
A Zone |
250.6 |
251.3 |
0.7 |
2.07 |
2.07 |
N127-6915 |
A Zone |
251.3 |
251.8 |
0.5 |
4.10 |
4.10 |
N127-6915 |
FWZ_3 |
323.3 |
323.8 |
0.5 |
24.30 |
24.30 |
N127-6915 |
FWZ_3 |
323.8 |
324.8 |
1.0 |
1.49 |
1.49 |
N127-6915 |
FWZ_3 |
324.8 |
325.6 |
0.8 |
2.40 |
2.40 |
N127-6915 |
FWZ_3 |
325.6 |
326.1 |
0.5 |
0.04 |
0.04 |
N127-6915 |
FWZ_3 |
326.1 |
326.6 |
0.5 |
0.54 |
0.54 |
N127-6915 |
FWZ_3 |
326.6 |
327.6 |
1.0 |
1.21 |
1.21 |
N127-6915 |
FWZ_3 |
327.6 |
328.2 |
0.6 |
43.90 |
43.90 |
N127-6915 |
FWZ_3 |
328.2 |
329.2 |
1.0 |
0.03 |
0.03 |
N127-6915 |
FWZ_3 |
329.2 |
330.2 |
1.0 |
6.54 |
6.54 |
N127-6915 |
FWZ_3 |
330.2 |
330.8 |
0.6 |
69.50 |
69.50 |
N127-6915 |
FWZ_3 |
330.8 |
331.6 |
0.8 |
26.70 |
26.70 |
N127-6915 |
FWZ_3 |
331.6 |
332.4 |
0.8 |
88.40 |
88.40 |
N127-6915 |
FWZ_3 |
332.4 |
333.9 |
1.5 |
5.20 |
5.20 |
N127-6917 |
A Zone |
261.7 |
262.5 |
0.8 |
0.27 |
0.27 |
N127-6917 |
A Zone |
262.5 |
263.1 |
0.6 |
12.30 |
12.30 |
N127-6917 |
A Zone |
263.1 |
264.1 |
1.0 |
0.79 |
0.79 |
N127-6917 |
A Zone |
264.1 |
265.0 |
0.9 |
0.81 |
0.81 |
N127-6917 |
A Zone |
265.0 |
265.8 |
0.8 |
1.71 |
1.71 |
N127-6917 |
A Zone |
265.8 |
266.3 |
0.5 |
112.00 |
90.00 |
N127-6929 |
A Zone |
240 |
241.5 |
1.5 |
22.00 |
22.00 |
N127-6929 |
A Zone |
241.5 |
243.0 |
1.5 |
0.26 |
0.26 |
N127-6929 |
A Zone |
260 |
261 |
1.0 |
0.23 |
0.23 |
N127-6929 |
A Zone |
261.0 |
261.9 |
0.9 |
0.11 |
0.11 |
N127-6929 |
A Zone |
261.9 |
262.9 |
1.0 |
96.70 |
90.00 |
N127-6929 |
A Zone |
262.9 |
263.8 |
0.9 |
1.30 |
1.30 |
DB-24-015 |
DUB_N |
141.9 |
142.5 |
0.6 |
143.50 |
90.00 |
DB-24-015 |
DUB_N |
142.5 |
143.9 |
1.4 |
6.14 |
6.14 |
DB-24-015 |
DUB_N |
143.9 |
145.1 |
1.2 |
0.19 |
0.19 |
DB-24-015 |
DUB_N |
145.1 |
146.7 |
1.6 |
0.15 |
0.15 |
DB-24-015 |
DUB_N |
146.7 |
148.3 |
1.6 |
0.21 |
0.21 |
DB-24-015 |
DUB_N |
148.3 |
149.9 |
1.6 |
2.81 |
2.81 |
DB-24-015 |
DUB_N |
426.5 |
427.5 |
1.0 |
3.50 |
3.50 |
DB-24-015 |
DUB_N |
427.5 |
428.5 |
1.0 |
11.70 |
11.70 |
DB-24-015 |
DUB_N |
428.5 |
429.2 |
0.7 |
3.94 |
3.94 |
DB-24-015 |
DUB_N |
429.2 |
430.1 |
0.9 |
5.04 |
5.04 |
DB-24-015 |
DUB_N |
430.1 |
430.8 |
0.7 |
0.63 |
0.63 |
DB-24-015 |
DUB_N |
430.8 |
431.5 |
0.7 |
4.08 |
4.08 |
DB-24-015 |
DUB_N |
431.5 |
432.5 |
1.0 |
0.28 |
0.28 |
DB-24-015 |
DUB_N |
432.5 |
433.2 |
0.7 |
2.95 |
2.95 |
DB-24-015 |
DUB_N |
433.2 |
434.2 |
1.0 |
0.24 |
0.24 |
DB-24-015 |
DUB_N |
434.2 |
435.4 |
1.2 |
4.43 |
4.43 |
DB-24-016 |
DUB_N |
234.8 |
235.7 |
0.9 |
10.20 |
10.20 |
DB-24-016 |
DUB_N |
235.7 |
237.1 |
1.4 |
3.23 |
3.23 |
DB-24-016 |
DUB_N |
237.1 |
238.2 |
1.1 |
0.01 |
0.01 |
DB-24-019 |
DUB_N |
59.5 |
60.5 |
1.0 |
11.50 |
11.50 |
DB-24-019 |
DUB_N |
60.5 |
61.5 |
1.0 |
0.12 |
0.12 |
DB-24-019 |
DUB_N |
61.5 |
62.5 |
1.0 |
11.40 |
11.40 |
DB-24-019 |
DUB_N |
62.5 |
63.5 |
1.0 |
4.88 |
4.88 |
DB-24-019 |
DUB_N |
63.5 |
64.5 |
1.0 |
1.99 |
1.99 |
DB-24-019 |
DUB_N |
64.5 |
65.5 |
1.0 |
7.92 |
7.92 |
DB-24-021 |
DUB_S |
162.0 |
162.5 |
0.5 |
0.79 |
0.79 |
DB-24-021 |
DUB_S |
162.5 |
164.0 |
1.5 |
0.01 |
0.01 |
DB-24-021 |
DUB_S |
164.0 |
165.5 |
1.5 |
1.44 |
1.44 |
DB-24-021 |
DUB_S |
165.5 |
167.0 |
1.5 |
0.01 |
0.01 |
DB-24-021 |
DUB_S |
167.0 |
168.4 |
1.4 |
0.02 |
0.02 |
DB-24-021 |
DUB_S |
168.4 |
169.0 |
0.6 |
116.50 |
90.00 |
DB-24-022 |
DUB_S |
59.8 |
61.0 |
1.2 |
6.53 |
6.53 |
DB-24-022 |
DUB_S |
61.0 |
62.0 |
1.0 |
22.40 |
22.40 |
DB-24-022 |
DUB_S |
62.0 |
63.0 |
1.0 |
0.01 |
0.01 |
DB-24-022 |
DUB_S |
292.2 |
293.1 |
0.9 |
6.81 |
6.81 |
DB-24-022 |
DUB_S |
293.1 |
294.2 |
1.1 |
8.64 |
8.64 |
DB-24-022 |
DUB_S |
294.2 |
295.3 |
1.1 |
0.64 |
0.64 |
DB-24-022 |
DUB_S |
342.1 |
343.4 |
1.3 |
10.35 |
10.35 |
DB-24-022 |
DUB_S |
343.4 |
344.6 |
1.2 |
2.66 |
2.66 |
DB-24-022 |
DUB_S |
344.6 |
345.4 |
0.8 |
5.93 |
5.93 |
DB-24-022 |
DUB_S |
345.4 |
346.5 |
1.1 |
2.84 |
2.84 |
DB-24-023 |
DUB_S |
194.4 |
195.0 |
0.6 |
19.05 |
19.05 |
DB-24-023 |
DUB_S |
195.0 |
195.6 |
0.6 |
7.76 |
7.76 |
DB-24-023 |
DUB_S |
195.6 |
196.4 |
0.8 |
2.93 |
2.93 |
DB-24-023 |
DUB_S |
196.4 |
197.2 |
0.8 |
4.37 |
4.37 |
DB-24-023 |
DUB_S |
197.2 |
197.9 |
0.7 |
101.50 |
90.00 |
DB-24-023 |
DUB_S |
197.9 |
198.7 |
0.8 |
3.19 |
3.19 |
DB-24-023 |
DUB_S |
198.7 |
199.5 |
0.8 |
7.62 |
7.62 |
DB-24-023 |
DUB_S |
199.5 |
200.3 |
0.8 |
6.55 |
6.55 |
DB-24-024 |
DUB_S |
83.8 |
84.8 |
1.0 |
5.42 |
5.42 |
DB-24-024 |
DUB_S |
84.8 |
85.8 |
1.0 |
2.87 |
2.87 |
DB-24-024 |
DUB_S |
85.8 |
86.8 |
1.0 |
10.15 |
10.15 |
DB-24-024 |
DUB_S |
86.8 |
87.8 |
1.0 |
6.35 |
6.35 |
DB-24-024 |
DUB_S |
87.8 |
88.8 |
1.0 |
7.60 |
7.60 |
DB-24-024 |
DUB_S |
88.8 |
89.8 |
1.0 |
4.99 |
4.99 |
DB-24-024 |
DUB_S |
89.8 |
90.8 |
1.0 |
52.00 |
52.00 |
DB-24-024 |
DUB_S |
90.8 |
91.8 |
1.0 |
44.60 |
44.60 |
DB-24-024 |
DUB_S |
91.8 |
92.8 |
1.0 |
3.19 |
3.19 |
DB-24-024 |
DUB_S |
92.8 |
93.8 |
1.0 |
3.36 |
3.36 |
DB-24-024 |
DUB_S |
93.8 |
94.8 |
1.0 |
1.21 |
1.21 |
DB-24-024 |
DUB_S |
94.8 |
95.8 |
1.0 |
5.98 |
5.98 |
DB-24-024 |
DUB_S |
95.8 |
96.8 |
1.0 |
3.29 |
3.29 |
DB-24-024 |
DUB_S |
96.8 |
97.8 |
1.0 |
4.60 |
4.60 |
DB-24-024 |
DUB_S |
97.8 |
98.8 |
1.0 |
2.62 |
2.62 |
DB-24-024 |
DUB_S |
98.8 |
99.8 |
1.0 |
4.83 |
4.83 |
DB-24-024 |
DUB_S |
99.8 |
100.8 |
1.0 |
3.92 |
3.92 |
DB-24-024 |
DUB_S |
100.8 |
101.6 |
0.8 |
2.79 |
2.79 |
DB-24-024 |
DUB_S |
101.6 |
102.5 |
0.9 |
4.30 |
4.30 |
DB-24-024 |
DUB_S |
102.5 |
103.3 |
0.8 |
5.20 |
5.20 |
DB-24-029 |
DUB_S |
298.2 |
299.0 |
0.8 |
16.70 |
16.70 |
DB-24-029 |
DUB_S |
299.0 |
300.0 |
1.0 |
0.01 |
0.01 |
DB-24-029 |
DUB_S |
300.0 |
301.2 |
1.2 |
0.08 |
0.08 |
DB-24-029 |
DUB_S |
301.2 |
302.4 |
1.2 |
0.08 |
0.08 |
DB-24-029 |
DUB_S |
302.4 |
303.6 |
1.2 |
2.32 |
2.32 |
DB-24-029 |
DUB_S |
303.6 |
304.6 |
1.0 |
0.12 |
0.12 |
DB-24-029 |
DUB_S |
304.6 |
305.5 |
0.9 |
5.31 |
5.31 |
DB-24-029 |
DUB_S |
305.5 |
306.3 |
0.8 |
0.18 |
0.18 |
DB-24-029 |
DUB_S |
306.3 |
307.0 |
0.7 |
6.82 |
6.82 |
DB-24-029 |
DUB_S |
307.0 |
307.7 |
0.7 |
98.90 |
90.00 |
DB-24-029 |
DUB_S |
307.7 |
308.7 |
1.0 |
0.05 |
0.05 |
DB-24-029 |
DUB_S |
308.7 |
309.6 |
0.9 |
1.50 |
1.50 |
DB-24-029 |
DUB_S |
309.6 |
310.3 |
0.7 |
0.86 |
0.86 |
DB-24-029 |
DUB_S |
310.3 |
311.1 |
0.8 |
6.38 |
6.38 |
DB-24-029 |
DUB_S |
311.1 |
312.2 |
1.1 |
1.51 |
1.51 |
DB-24-029 |
DUB_S |
312.2 |
313.3 |
1.1 |
2.00 |
2.00 |
DB-24-029 |
DUB_S |
313.3 |
313.8 |
0.5 |
0.57 |
0.57 |
DB-24-029 |
DUB_S |
313.8 |
314.6 |
0.8 |
0.49 |
0.49 |
DB-24-029 |
DUB_S |
314.6 |
315.4 |
0.8 |
0.47 |
0.47 |
DB-24-029 |
DUB_S |
315.4 |
315.9 |
0.5 |
2.80 |
2.80 |
DB-24-029 |
DUB_S |
315.9 |
316.8 |
0.9 |
0.06 |
0.06 |
DB-24-029 |
DUB_S |
316.8 |
317.7 |
0.9 |
2.76 |
2.76 |
DU-24-001 |
DUC Area |
255.4 |
255.9 |
0.5 |
0.56 |
0.56 |
DU-24-001 |
DUC Area |
255.9 |
256.8 |
0.9 |
14.50 |
14.50 |
DU-24-001 |
DUC Area |
256.8 |
257.5 |
0.7 |
0.06 |
0.06 |
DU-24-003 |
DUC Area |
140.2 |
140.8 |
0.6 |
117.50 |
90.00 |
DU-24-003 |
DUC Area |
140.8 |
141.5 |
0.7 |
0.35 |
0.35 |
DU-24-003 |
DUC Area |
141.5 |
142.2 |
0.7 |
0.24 |
0.24 |
DU-24-003 |
DUC Area |
142.2 |
143.4 |
1.2 |
5.96 |
5.96 |
DU-24-004 |
DUC Area |
223.4 |
223.9 |
0.5 |
2.27 |
2.27 |
DU-24-004 |
DUC Area |
223.9 |
224.5 |
0.6 |
0.02 |
0.02 |
DU-24-004 |
DUC Area |
224.5 |
225.5 |
1.0 |
0.07 |
0.07 |
DU-24-004 |
DUC Area |
225.5 |
226.5 |
1.0 |
13.40 |
13.40 |
NW-24-005 |
NW Area |
134.4 |
135.4 |
1.0 |
0.01 |
0.01 |
NW-24-005 |
NW Area |
135.4 |
136.2 |
0.8 |
337.00 |
90.00 |
NW-24-005 |
NW Area |
136.2 |
137.3 |
1.10 |
0.01 |
0.01 |
PR-24-088 |
PR-2A |
226.4 |
227.4 |
1.0 |
0.67 |
0.67 |
PR-24-088 |
PR-2A |
227.4 |
228.8 |
1.4 |
132.50 |
90.00 |
PR-24-088 |
PR-2A |
228.8 |
229.4 |
0.6 |
0.31 |
0.31 |
PR-24-089 |
PR-2A |
233.4 |
234.4 |
1.0 |
47.20 |
47.20 |
PR-24-089 |
PR-2A |
234.4 |
235.0 |
0.7 |
62.80 |
62.80 |
PR-24-089 |
PR-2A |
235.0 |
236.0 |
1.0 |
0.02 |
0.02 |
Figures accompanying this announcement are available
at:https://www.globenewswire.com/NewsRoom/AttachmentNg/408f41a6-0b92-4b39-bcce-e61695950cbchttps://www.globenewswire.com/NewsRoom/AttachmentNg/ce291a8a-abb9-4835-8498-853f42f0a3a5https://www.globenewswire.com/NewsRoom/AttachmentNg/2b74a12a-570b-45da-9ec6-31608e3f1a78https://www.globenewswire.com/NewsRoom/AttachmentNg/2b63ca00-5706-41af-ba77-7c8fabc0b7aahttps://www.globenewswire.com/NewsRoom/AttachmentNg/76bf24cc-fb7a-453f-9f6d-2cb5881574b4https://www.globenewswire.com/NewsRoom/AttachmentNg/9b748795-e71d-4979-bb43-5a7c37fe9cbd
PDF
available: http://ml.globenewswire.com/Resource/Download/dc82565f-a529-45b6-a390-ed3c20e8579c
Wesdome Gold Mines (TSX:WDO)
Historical Stock Chart
From Nov 2024 to Dec 2024
Wesdome Gold Mines (TSX:WDO)
Historical Stock Chart
From Dec 2023 to Dec 2024