LIFT Li FT Power Ltd

Li-FT Power Ltd. (“LIFT” or the “Company”) (TSXV: LIFT) (OTCQX: LIFFF) (Frankfurt: WS0) is pleased to report assays from 8 drill holes completed at the Echo, Fi Main, Fi Southwest & Nite pegmatites within the Yellowknife Lithium Project (“YLP”) located outside the city of Yellowknife, Northwest Territories (Figure 1). Drilling intersected significant intervals of spodumene mineralization, with the following highlights:

Highlights:

• YLP-0223: 14 m at 1.55% Li2O, (Echo)
• YLP-0226: 13 m at 1.45% Li2O, (Echo)
• YLP-0217: 10 m at 0.93% Li2O, (Echo)and: 2 m at 0.63% Li2O
• YLP-0219: 9 m at 0.97% Li2O, (Fi Main)

Discussion of Results

This news release provides results for eight drill holes (1,916 m), six of which are from ongoing 2024 winter drilling and two from the 2023 program. Three holes are reported from the Echo pegmatite, two each on Fi Southwest and Nite, and one from Fi Main. A table of composite calculations, general comments related to this discussion, and a table of collar headers are provided towards the end of this section.

Dave Smithson, SVP, Geology of LIFT comments, “We are pleased to see the first results from the southeast end of the Echo pegmatite system where holes 223 and 226 intercepted strong shallow spodumene mineralization averaging 1.55% Li2O over 14 m and 1.45% Li2O over 13 m, respectively. Geological mapping at this portion of the Echo pegmatite system in 2023 reveals that there is still an additional 500 m of strike-length of spodumene-bearing pegmatite that remains untested for follow-up drilling, and so we are very excited to build these initial results by testing the remainder of the dyke to the southeast, to a depth of 250 m from surface.”

Figure 1 – Location of LIFT’s Yellowknife Lithium Project. Drilling has been thus far mainly focused on the Near Field Group of pegmatites which are located to the east of the city of Yellowknife along a government-maintained paved highway, and more recently advancing to the Echo target, the first drilling in the Further Afield Group.

Echo Pegmatite System

The Echo pegmatite complex comprises a fanning splay of moderate to gently dipping dykes for 0.5 km to the northwest (“Echo splay”), apparently sourced from a steeply dipping, northwest-trending, feeder dyke (“Echo feeder”). The dyke complex has a total strike length of over 1.0 km. The feeder dyke is 10-15 m wide whereas the gently dipping dykes in the splay are thicker, ranging from 10-25 m wide. The holes in this news release were drilled into both the Echo splay and Echo feeder dyke.

YLP-0223 is the first hole reported from the Echo feeder dyke and was drilled to test 250 m from its northern mapped extent and 25 m below the surface. Drilling intersected a single 15 m wide pegmatite dyke that returned an assay composite of 1.55% Li2O over 14 m (Table 1 & 2, Figures 2 & 3).

Figure 2 – Plan view showing the surface expression of the Echo pegmatite with diamond drill holes reported in this press release.

Figure 3 – Cross-section illustrating YLP-0223 with results as shown in the Echo pegmatite dyke with a 14 m interval of 1.55% Li2O.

YLP-0226 was collared 50 m south of YLP-0223 to test the Echo feeder 300 m from its northern mapped extent and 25 m below the surface. Drilling intersected a 41 m corridor with 32 m of pegmatite that includes a 19 m wide dyke that yielded a composite of 1.45% Li2O over 13 m (Table 1 & 2, Figures 2 & 4).

Figure 4 – Cross-section illustrating YLP-0226 with results as shown in the Echo pegmatite dyke with a 13 m interval of 1.45% Li2O.

YLP-0217 was collared 100 m northwest of the Echo feeder to test the Echo splay about 400 m from its northwest mapped extent, <25 to 100 m below the surface, and on section with previously released YLP-0124 (1.52% Li2O over 12 m). Drilling intersected a shallow dipping, 79 m wide, interval with 29 m of pegmatite spread over a 14 m wide dyke and five others between 1-7 m in width. Two of these dykes, spaced 25-30 m apart, combine to form a composite of 0.88% Li2O over 12 m (Table 1 & 2, Figure 2).

Fi Main Pegmatite

The Fi Main pegmatite complex crops out over at least 1.5 km of strike length within a north-south striking corridor that dips between 70°-85° to the west. The central stretch of the complex consists of a 25-30 m thick dyke that is flanked by one or more <5 m wide dykes within a 25-75 m wide corridor. This thick dyke splits to the north and south to form a wider corridor (75-150 m) that hosts a similar volume of pegmatite spread over more and generally narrower dykes.

YLP-0219 was drilled to test the southern part of the Fi Main pegmatite at 150-250 m below the surface. Previously released drill holes that returned on-section intersections of upper pegmatite include YLP-0008 (0.89% Li2O over 20 m, 25 m depth) and YLP-0014 (0.74% Li2O over 23 m, 50 m). New drilling that targeted 150 m beneath the surface intersected a 23 m upper corridor with 17 m of pegmatite grading 0.97% Li2O over 9 m. Previous on-section intersections of lower pegmatite include 0.91% Li2O over 15 m at 75 m depth (YLP-0008) and negligible grade at 100 m depth. (YLP-0014) New drilling intersected a 20 m wide lower corridor with 13 m of pegmatite that returned negligible grade (Table 1 & 2, Figures 5 & 6).

Figure 5 – Plan view showing the surface expression of the Fi Main pegmatite with diamond drill holes reported in this press release.

Figure 6 – Cross-section illustrating YLP-0219 with results as shown in the Fi Main pegmatite dyke with a 9 m interval of 0.97% Li2O.

Fi Southwest Pegmatite

The Fi Southwest (Fi-SW) pegmatite complex is exposed over at least 1.1 km on surface and occurs within a broader corridor that is 50-100 m wide and dips between 60°-80° to the east. The complex is cored by a 20-40 m wide main dyke that is continuous for at least 800 m along strike, with numerous sub-parallel subsidiary dykes between 1-5 m in width. At its northern and southern ends, the main dyke splays out into a broader corridor with more dykes that have narrower widths. YLP-0201 and YLP-0206 both tested the northern splay.

YLP-0201 was drilled on a section 150 m beyond the mapped northern extent of the main dyke to test at 50 m below the surface. Drilling intersected a 63 m wide corridor with 7 m of pegmatite spread over two dykes, neither of which returned significant grade.

YLP-0206 was collared on a section 100 m south of YLP-0201 to test at 250 m below the surface and just beyond the mapped northern tip of the main dyke. Previously released drilling on this section returned 1.03% Li2O over 24 m from 50-100 m depth (YLP-0051), 1.32% Li2O over 14 m from 125-150 m (YLP-0075), and 1.06% Li2O over 16 m from 150-175 m depth (YLP-0081). New drilling intersected a 24 m wide corridor with 19 m of pegmatite that assayed negligible grade (Table 1 & 2, Figure 7).

Figure 7 – Plan view showing the surface expression of the Fi Southwest pegmatite with diamond drill holes reported in this press release.

Nite Pegmatite

The Nite pegmatite complex is exposed along 1.4 km of strike length as a swarm of parallel-trending dykes that occur within a north-northeast striking corridor dipping ~50°-70° degrees to the east. The northern part of this complex consists of a 5-15 m thick dyke flanked by one or more 1-5 m dykes whereas the southern part comprises a fanning splay of 5-10 thin dykes within a 200 m wide corridor.

YLP-0194 was drilled to test the main pegmatite at 400 m from its northern mapped extent and 200-225 m below the surface. Previous drilling on the same section returned 1.24% Li2O over 5 m from 50 m depth (YLP-0152) and 0.87% Li2O over 6 m from 150 m (YLP-0192). New drilling intersected a 20 m wide corridor with 13 m of pegmatite that returned negligible grade.

YLP-0197 was collared on a section 200 m south of YLP-0194 to test the Nite main pegmatite at 250 m below the surface. Previously released drilling on the same section returned 0.58% Li2O over 17 m from 50 m depth (YLP-0196) and 0.81% Li2O over 13 m from 150 m (YLP-0198). New drilling intersected a 44 m wide corridor with 22 m of pegmatite that returned negligible grade (Table 1 & 2, Figure 8).

Figure 8 – Plan view showing the surface expression of the Nite pegmatite with diamond drill holes reported in this press release.

Table 1 – Assay highlights for drill holes reported in this press release.

Hole No.	From (m)	To (m)	Interval (m)	Li2O%	Dyke
YLP-0194	No significant results				Nite
YLP-0197	No significant results				Nite
YLP-0201	No significant results				Fi SW
YLP-0206	No significant results				Fi SW
YLP-0217	16	26	10	0.93	Echo
and	54	56	2	0.63
YLP-0219	181	190	9	0.97	Fi Main
YLP-0223	20	34	14	1.55	Echo
YLP-0226	34	47	13	1.45	Echo

General Statements

All eight holes described in this news release were drilled broadly perpendicular to the dyke orientation so that the true thickness of reported intercepts will range somewhere between 65-100% of the drilled widths. A collar header table is provided below.

Mineralogical characterization for the YLP- pegmatites is in progress through hyperspectral core scanning and X-ray diffraction work. Visual core logging indicates that the predominant host mineral is spodumene.

Table 2 - Drill collars table of reported drill holes in this press release

Drill Hole	NAD83	Easting	Northing	Elevation (m)	Depth (m)	Azimuth (°)	Dip (°)	Dyke
YLP-0194	Zone 11	647,802	6,936,487	206	341	298	53	Nite
YLP-0197	Zone 11	647,722	6,936,301	208	360	298	53	Nite
YLP-0201	Zone 12	371,513	6,941,165	252	102	302	45	Fi SW
YLP-0206	Zone 12	371,611	6,940,998	250	372	300	68	Fi SW
YLP-0217	Zone 12	439,296	6,922,654	295	171	215	45	Echo
YLP-0219	Zone 12	371,642	6,941,442	251	327	98	56	Fi Main
YLP-0223	Zone 12	439,397	6,922,617	279	132	216	45	Echo
YLP-0226	Zone 12	439,431	6,922,578	280	111	215	45	Echo

QA/QC & Core Sampling Protocols

All drill core samples were collected under the supervision of LIFT employees and contractors. Drill core was transported from the drill platform to the core processing facility where it was logged, photographed, and split by diamond saw prior to being sampled. Samples were then bagged, and blanks and certified reference materials were inserted at regular intervals. Field duplicates consisting of quarter-cut core samples were also included in the sample runs. Groups of samples were placed in large bags, sealed with numbered tags in order to maintain a chain-of-custody, and transported from LIFT’s core logging facility to ALS Labs (“ALS”) laboratory in Yellowknife, Northwest Territories.

Sample preparation and analytical work for this drill program were carried out by ALS. Samples were prepared for analysis according to ALS method CRU31: individual samples were crushed to 70% passing through 2 mm (10 mesh) screen; a 1,000-gram sub-sample was riffle split (SPL-21) and then pulverized (PUL-32) such that 85% passed through 75 micron (200 mesh) screen. A 0.2-gram sub-sample of the pulverized material was then dissolved in a sodium peroxide solution and analysed for lithium according to ALS method ME-ICP82b. Another 0.2-gram sub-sample of the pulverized material was analysed for 53 elements according to ALS method ME-MS89L. All results passed the QA/QC screening at the lab, all inserted standards and blanks returned results that were within acceptable limits.

Qualified Person

The disclosure in this news release of scientific and technical information regarding LIFT’s mineral properties has been reviewed and approved by Ron Voordouw, Ph.D., P.Geo., Partner, Director Geoscience, Equity Exploration Consultants Ltd., and a Qualified Person as defined by National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101) and member in good standing with the Northwest Territories and Nunavut Association of Professional Engineers and Geoscientists (NAPEG) (Geologist Registration number: L5245).

About LIFT

LIFT is a mineral exploration company engaged in the acquisition, exploration, and development of lithium pegmatite projects located in Canada. The Company’s flagship project is the Yellowknife Lithium Project located in Northwest Territories, Canada. LIFT also holds three early-stage exploration properties in Quebec, Canada with excellent potential for the discovery of buried lithium pegmatites, as well as the Cali Project in Northwest Territories within the Little Nahanni Pegmatite Group.

For further information, please contact:

Francis MacDonaldChief Executive OfficerTel: + 1-604-609-6185Email: info@li-ft.comWebsite: www.li-ft.com

Daniel GordonInvestor RelationsTel: +1-604-609-6185Email: investors@li-ft.com

Cautionary Statement Regarding Forward-Looking Information

Certain statements included in this press release constitute forward-looking information or statements (collectively, “forward-looking statements”), including those identified by the expressions “anticipate”, “believe”, “plan”, “estimate”, “expect”, “intend”, “may”, “should” and similar expressions to the extent they relate to the Company or its management. The forward-looking statements are not historical facts but reflect current expectations regarding future results or events. This press release contains forward looking statements. These forward-looking statements and information reflect management's current beliefs and are based on assumptions made by and information currently available to the company with respect to the matter described in this new release. 

Forward-looking statements involve risks and uncertainties, which are based on current expectations as of the date of this release and subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied by such statements. Additional information about these assumptions and risks and uncertainties is contained under "Risk Factors and Uncertainties" in the Company's latest annual information form filed on March 30, 2023, which is available under the Company's SEDAR+ profile at www.sedarplus.ca, and in other filings that the Company has made and may make with applicable securities authorities in the future. Forward-looking statements contained herein are made only as to the date of this press release and we undertake no obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by law. We caution investors not to place considerable reliance on the forward-looking statements contained in this press release.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.

Photos accompanying this announcement are available athttps://www.globenewswire.com/NewsRoom/AttachmentNg/3b600cc9-378a-4d51-91fe-28fab3ceab75https://www.globenewswire.com/NewsRoom/AttachmentNg/7c5bfd77-a370-4a57-a6b5-640310e946d6https://www.globenewswire.com/NewsRoom/AttachmentNg/7adece4b-6959-4e29-8a17-200d8a1e9b1bhttps://www.globenewswire.com/NewsRoom/AttachmentNg/ed563711-8269-4d7f-b76c-050e39ba827dhttps://www.globenewswire.com/NewsRoom/AttachmentNg/d68ed41f-83e1-49b1-8fe7-922cdefc43cahttps://www.globenewswire.com/NewsRoom/AttachmentNg/a5fe399e-ce4d-498e-b59a-502617e59029https://www.globenewswire.com/NewsRoom/AttachmentNg/ffe635a4-7a66-42bb-a7a4-630f8e391721https://www.globenewswire.com/NewsRoom/AttachmentNg/52428bff-78c9-4852-93bd-95e415750160