Filed
Pursuant To Rule 424(b)(5)
Registration
No. 333-225377
PROSPECTUS
SUPPLEMENT
(To
Prospectus dated June 14, 2018)
SIGMA
LABS, INC.
493,027
Shares of Common Stock
Pre-funded
Warrants to Purchase 22,438 Shares of Common Stock
We are offering 493,027
shares of our common stock and pre-funded Series B warrants to purchase up to 22,438 shares of our common stock with an unpaid
exercise price of $0.0001 per share of our common stock (approximately $2.781 of the exercise price of each such pre-funded
warrant will be prepaid to the Company at the closing of the offering), which we refer to herein as “pre-funded warrants.”
Each pre-funded warrant will be exercisable for one share of our Common Stock on or after the date of issuance.
Pursuant
to a Securities Purchase Agreement dated as of April 2, 2020, we have agreed to sell and issue to certain institutional
investors 515,465 units for a purchase price of $2.91 per unit as follows:
|
●
|
493,027 units each consisting of one share of our common stock and a Series A Warrant to
purchase one share of our common stock (which we have referred to herein as the “private
placement warrant”); and
|
|
|
|
|
●
|
22,438
units consisting of a pre-funded warrant to purchase one share of our common stock and
one private placement warrant to purchase one share of our common stock.
|
Only the 493,027 shares
of our common stock, pre-funded warrants to purchase 22,438 shares of our common stock and the underlying shares of
our common stock are being offered and issued pursuant to this prospectus supplement. The private placement warrant and underlying
shares of our common stock are being issued in a private placement and not part of this offering.
Our
common stock is listed on The NASDAQ Capital Market under the symbol “SGLB.” On April 1, 2020 the last reported sale
price of our common stock on The NASDAQ Capital Market was $3.14 per share.
The
pre-funded warrants are not and will not be listed for trading on The NASDAQ Capital Market, or any other securities exchange
or nationally recognized trading system. There is no market through which the pre-funded warrants may be sold and purchasers may
not be able to resell the pre-funded warrants purchased under this prospectus supplement. This may affect the pricing of the pre-funded
warrants in the secondary market, the transparency and availability of trading prices, and the liquidity of the pre-funded warrants.
As
of the date of this prospectus supplement, the aggregate market value of our outstanding common stock held by non-affiliates,
or public float, was approximately $19,855,231.20, based on 2,026,044 shares of outstanding common stock held by non-affiliates
as of the date of this prospectus supplement, at a price of $9.80 per share, which was the closing price of our common
stock on The NASDAQ Capital Market on February 7, 2020. Pursuant to General Instruction I.B.6 of Form S-3, in no event
will we sell securities registered on the registration statement of which this prospectus supplement is a part in a primary offering
with a value exceeding more than one-third of our public float in any 12-month period so long as our public float remains below
$75.0 million. As of the date of this prospectus supplement, we have offered and sold securities having an aggregate market value
of $2,460,000 pursuant to General Instruction I.B.6 of Form S-3 during the prior 12 calendar month period that ends on, and includes,
the date of this prospectus supplement.
Investing
in our securities involves significant risks. See “Risk Factors” beginning on page S-8 of this prospectus supplement
and in the documents incorporated by reference in this prospectus supplement and in the accompanying prospectus.
Neither
the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or
determined if this prospectus supplement or the accompanying prospectus is truthful or complete. Any representation to the contrary
is a criminal offense.
We
have engaged Dawson James Securities, Inc. (“Dawson James” or the “Placement Agent”) to act as our exclusive
placement agent in connection with this offering. Dawson James is not purchasing or selling the securities offered by us, and
is not required to sell any specific number or dollar amount of securities. We have agreed to pay Dawson James the placement fees
set forth in the table below and to issue to the placement agent warrants to purchase up to 41,237 shares of Common Stock
at an exercise price of $3.64 per share. The placement agent warrants and underlying shares are not covered by this prospectus
supplement.
|
|
Per
Unit or Share
|
|
|
Total
|
|
Offering price
|
|
$
|
2.91
|
|
|
$
|
1,500,000
|
|
Placement agent fees (1)
|
|
$
|
0.2328
|
|
|
$
|
120,000
|
|
Proceeds, before expenses, to us
|
|
$
|
2.6772
|
|
|
$
|
1,380,000
|
|
(1)
For additional information about the expenses which we have agreed to reimburse to the Placement Agent and the Placement Agent
Warrant we will issue to the Placement Agent in connection with this offering, see “Plan of Distribution” beginning
on page S-25 of this prospectus supplement.
We
estimate total expenses of this offering, excluding the placement agent fees, will be approximately $150,000. This offering is
expected to close on or about April 6, 2020, subject to customary closing conditions, without further notice to you.
DAWSON
JAMES SECURITIES, INC.
The
date of this prospectus supplement is April 6, 2020.
TABLE
OF CONTENTS
Prospectus
Supplement
Prospectus
ABOUT
THIS PROSPECTUS SUPPLEMENT
This
prospectus supplement is part of the registration statement on Form S-3 (File No. 333-225377) that we filed with the Securities
and Exchange Commission, or the SEC, using a “shelf” registration process to register sales of our securities under
the Securities Act of 1933, as amended, or the Securities Act. This document consists of two parts. The first part is this prospectus
supplement, including the documents incorporated by reference, which describes the specific terms of this offering. The second
part is the accompanying prospectus filed with the SEC as part of the registration statement that was declared effective by the
SEC on June 14, 2018, including the documents incorporated by reference, that gives more general information, some of which may
not apply to this offering. Generally, when we refer only to the “prospectus,” we are referring to both parts combined.
This prospectus supplement may add to, update or change information in the accompanying prospectus and the documents incorporated
by reference into this prospectus supplement or the accompanying prospectus.
If
information in this prospectus supplement is inconsistent with the accompanying prospectus and any document incorporated by reference
that was filed with the SEC before the date of this prospectus supplement, you should rely on this prospectus supplement. This
prospectus supplement, the accompanying prospectus and the documents incorporated into each by reference include important information
about us, the securities being offered and other information you should know before investing in our securities. You should also
read and consider information in the documents to which we have referred you in the section of this prospectus entitled “Where
You Can Find More Information.”
We
sometimes collectively refer to the shares of common stock and pre-funded warrants offered hereby and the shares of common stock
underlying the pre-funded warrants as the “securities.”
You
should rely only on this prospectus supplement, the accompanying prospectus and the information incorporated or deemed to be incorporated
by reference in this prospectus supplement and the accompanying prospectus. We and the Placement Agent have not authorized anyone
to provide you with information that is in addition to or different from that contained or incorporated by reference in this prospectus
supplement and the accompanying prospectus. If anyone provides you with different or inconsistent information, you should not
rely on it. This prospectus supplement, the accompanying prospectus and any related free writing prospectus do not constitute
an offer to sell or the solicitation of an offer to buy securities in any jurisdiction to any person to whom it is unlawful to
make such offer or solicitation in such jurisdiction. You should not assume that the information contained or incorporated by
reference in this prospectus supplement or the accompanying prospectus is accurate as of any date other than as of the date of
this prospectus supplement or the accompanying prospectus, as the case may be, or in the case of the documents incorporated by
reference, the date of such documents regardless of the time of delivery of this prospectus supplement and the accompanying prospectus
or any sale of our securities. Our business, financial condition, liquidity, results of operations and prospects may have changed
since those dates.
We
further note that the representations, warranties and covenants made by us in any agreement that is filed as an exhibit to any
document that is incorporated by reference into this prospectus supplement or the accompanying prospectus were made solely for
the benefit of the parties to such agreement, including, in some cases, for the purpose of allocating risk among the parties to
such agreements, and should not be deemed to be a representation, warranty or covenant to you. Moreover, such representations,
warranties or covenants were accurate only as of the date when made. Accordingly, such representations, warranties and covenants
should not be relied on as accurately representing the current state of our affairs.
The
industry and market data contained or incorporated by reference in this prospectus supplement and the accompanying prospectus
are based either on our management’s own estimates or on independent industry publications, reports by market research firms
or other published independent sources. Unless otherwise indicated, all information contained or incorporated by reference in
this prospectus supplement and the accompanying prospectus concerning our industry in general or any segment thereof, including
information regarding our general expectations and market opportunity, is based on management’s estimates using internal
data, data from industry related publications, consumer research and marketing studies and other externally obtained data.
PROSPECTUS
SUPPLEMENT SUMMARY
This
summary highlights selected information appearing elsewhere in this prospectus supplement or in the accompanying prospectus or
incorporated by reference in this prospectus supplement and in the accompanying prospectus and does not contain all of the information
that may be important to you or that you should consider before investing in our securities. Before making an investment decision,
you should read this prospectus supplement, the accompanying prospectus and the information incorporated by reference in this
prospectus supplement and in the accompanying prospectus in their entirety, including “Risk Factors” beginning on
page S-8 of this prospectus supplement.
All
share and per share amounts in this prospectus have been retroactively adjusted to give effect to a 1-for-10 reverse stock split
of our common stock effected on February 27, 2020.
Throughout
this prospectus supplement, the terms “Sigma,” “we,” “us,” “our,” and “our
company” refer to Sigma Labs, Inc., a Nevada corporation.
Our
Company
Overview:
Sigma
is a 10-year-old software company that was founded by scientist-engineers composed of physicists and metallurgists then working
at Los Alamos National Labs for the entrepreneurial purpose of developing sophisticated metallurgical products. The public company
that in 2010 completed a share exchange transaction with the shareholders of a company that became Sigma Labs in 2010 was incorporated
as Messidor Limited in Nevada on December 23, 1985 and changed its name to Framewaves Inc. in 2001. On September 27, 2010, the
name was changed from Framewaves Inc. to Sigma Labs, Inc. Thenceforth, the Company developed both a dental implant technology
and a munitions technology before narrowing its focus exclusively in 2016 to solving the complex and challenging problem of how
to best assure the high quality of metal parts manufactured in laser powder bed additive manufacturing (AM) machines. Sigma and
many others, then and now, believed that until this problem was solved, 3D manufacturing of metal parts was not sufficiently scalable
to grow past prototyping and mature into a major industry enjoying high quality yields and cost-efficient production runs. The
solution that Sigma developed to solve this problem is In-Process-Quality-Assurance (“IPQA”) software known as PrintRite3D®.
From
2016 through 2020 the Company and its technology co-evolved in transformation that saw the Company step up from being a small
research and development operation to reinvent itself as a technology commercialization company in 2017 deploying its alpha technology
concept with Aerojet Rocketdyne, Pratt and Whitney, Siemens, Woodward, and other companies to work as a sometimes virtual integrated
team with these customers’ R&D personnel and thus to acquire directly from major companies in the market the definition
of the specifications of what Sigma’s product would have to be in order to meet commercial industrial standards. Defining
these standards included defining the specific product quality data information and analytics requirements of large production
manufacturers as well as determining the user-friendly form the product must have. In February 2017, Sigma completed a financing
and a simultaneous up list on to the NASDAQ Capital Market, the two actions intended to enable the Company to accelerate product
development and commercialization while also having ongoing access to capital. By mid-2018, Sigma had doubled its software development
team and in the course of the year developed and integrated its PrintRite3D® Thermal Energy Density™ (TED) and Thermal
Energy Planck (TEP) algorithm analytical packages into a hardened commercial industrial product presented at Formnext in November
2018. In 2019, the Company launched its Rapid Test and Evaluation Program (RTE) in order to deploy its new product in a test and
evaluation process explicitly designed: (1) to define the test outcome requirements of both end-users and Original Equipment Manufacturers
(OEM) required to meet their respective needs in a production setting; and, (2) to be a pathway that Sigma believed would lead
to sales of equipment to end-users or of licenses to OEMs subject to the tests and evaluations meeting the upfront stated requirement
of the companies with whom tests would be run. In the second Quarter of 2019, Sigma released version 5.0 of PrintRite3D® with
a user-friendly interface tool that enables process engineers to drill down into the data and machine operators to better understand
and control the process.
By
year-end of 2019, the RTE results were consistently favorable and we experienced no product failures, however the time required
to complete an RTE was longer than expected due to operational issues within the test sites that were beyond our control. Baker
Hughes, for whom on-site testing began in April 2019, had ordered a Phase 2 as the final phase ahead of a potentially broader
global rollout of the technology to their additive manufacturing machine base. The major service provider, with whom our on-site
testing began in March 2019, had also begun its second RTE to start on a different OEM brand from the first RTE tests. Another
major OEM whose purchase order for an RTE we announced in August 2019 had only its own brand upon which to test and agreed to
complete two simultaneous test units on different models and was thus on a fast track. Airbus was developing on schedule and expected
to require a Phase 2 if and after the current RTE met their needs. Materialise, a diverse AM company and an OEM for AM control
systems and software, had been Sigma’s first RTE program participant and with whom the Company announced in June 2019 that
Sigma had entered into a non-binding Memorandum of Understanding to integrate PrintRite3D® with Materialise’s new MPC
AM equipment control system. As stated in the “Recent Events” of this document, on March 5, 2020 the Company announced
that Sigma and Materialise have now entered a Joint Sales Agreement to commercialize the integrated product.
As
defined and disclosed in 2019, Sigma’s mission and challenge in 2020 and beyond is to convert the testing it conducted in
2019 into purchase orders and OEM licenses going forward. Of course, there is no assurance that this mission will be accomplished,
even as the goal and strategy are what would be the logical outcomes of successful product demonstrations. In order to further
strengthen itself to deliver on its mission to convert successful test and evaluation outcomes into end-user sales and OEM licenses,
the Company recruited and hired Mark K. Ruport as of December 3, 2019 to help lead the company forward as Executive Chair. As
reported in December, Mr. Ruport is a skilled sales and marketing chief executive who has built three substantial software enterprises.
Currently,
Sigma is focusing on four markets: (i) end-user for deployment of PrintRite3D® in serial production; (2) OEMs for purchases
of licenses and generating fees and royalties thereafter; (3) additive manufacturing software venders for alliances and licenses
for co-sales; and (4) research foundations, standards organizations and universities, all in service of Sigma’s potential
for setting the industry standard of measurement by providing data and analytics as a metrics-based quality standard of metal
quality for all 3D laser powderbed manufactured parts, notwithstanding the design, metal, or brand of equipment upon which parts
are manufactured.
Additive
Metal Manufacturing and the role and need for Sigma’s technology:
3D
laser powderbed manufacturing of metal parts is a technology that uses lasers to sculpt parts by welding powdered metals into
3-dimensional (3D) objects and, to date, the quality of these parts can vary from part to part in a single production run, as
well as from machine to machine in a production line. Traditional quality assurance methods relying on statistically based post-process
inspection methods so well proven by “Subtractive Manufacturing” cannot be used effectively to improve and assure
quality of parts manufactured using 3D metal printers. The aforementioned traditional quality assurance methods are based on a
manufacturing process that is the opposite of 3D Additive Manufacturing; Subtractive Manufacturing begins with quality-assured
already formed pieces of metal as a raw material (not powdered metal as is used as raw material in 3D) and machines it with equipment
such as lathes, milling machines, and CNC machines to subtract metal and thus form finished metal parts, or by casting molten
metal into molded parts usually to then be further machined. Since the metal used in Subtractive Manufacturing is already of proven
quality, the quality of the metal for all parts in a production run is known to be uniform, subject to post process inspection
of a statistically determined valid sample size focused primarily on metrology to determine dimensional accuracy rather than metallurgy
to determine metal quality.
The
challenge presented of 3D Additive Manufacturing quality assurance is illustrated by the fact that if a 3D metal manufacturing
machine fabricates 10 parts, and quality inspectors then rigorously inspect three of them, the inspectors will have learned about
the quality of only the three parts they destroyed or CT-scanned and nothing that is sufficient to confirm or reject the quality
of the remaining seven. Quality assurance of 3D Additive metal parts requires high quality sensitive manufacturers to institute
procedures to inspect 100% of the parts being made. Sigma believes that the best, indeed, to Sigma’s knowledge, the only
known way to attain high yields for both manufacturing quality and cost efficiency is an In-Process-Quality-Assurance (IPQA®)
approach that examines each part in real time as it is being manufactured, determines in real time whether it meets quality specifications
and permits machine operators to act on the information if a part is beginning to deviate from its design specifications.
As
evidenced in the marketplace in 2016 and after the pent-up demand of GE, Airbus and others to press forward into advanced 3D metal
manufacturing, production took place with the assumption that highly reliable in-process quality assurance capability would likely
emerge either from their own internal efforts or be attained through licensing, or acquisition. In the meantime, CT scans and
other costly post-process inspection became an accepted cost as initially sustainable in the startup phases of production. However,
until companies that utilize 3D production facilities like GE Aviation are able to effectively verify that each part conforms
to design specifications of attributes of shape, density, strength and consistency in real-time during the manufacturing process,
we believe that such companies will be at risk of letting some substandard parts through and, also, be unable to improve the workflow
to high quality cost-optimum yields of 3D printed metal parts. No matter how much acuity and at what cost a suite of post process
inspection tools might provide 3D manufactured metal parts, it currently can only assure quality yield by rejecting fully formed
parts, and, over time, applying comprehensive ‘reverse engineering’ forensic analyses of each rejected part to identify
repeating quality flaws attributable to constants such as location, design, or scan strategy. Once the locations of these repeating
flaws are identified, process engineers can act to make the AM equipment deliver better quality by adjusting the computer-based
manufacturing instructions of AM equipment to offset the repeating flaws discovered by that deep analyses of individual rejected
parts in many manufacturing runs. This prolonged post-process methodology is very costly due to the loss of material and rejected
parts as well as post-process analysis labor cost and inspection cost such as CT scanning. Additionally, there still lingers the
question of whether or not the post-process inspections were sufficiently granular to assure that flawed parts were not accepted
and shipped.
We
believe that our product, PrintRite3D® version 5.2, which is ‘agnostic’ and can be installed on all major brands
of 3D metal laser powderbed printers, solves these problems by determining if each part is being made to the metallurgical quality
specifications of the product design as each part is being made. Our software enables 3D prototyping to evolve forward into serial
or production 3D manufacturing by providing a software suite with algorithm-based tools that address and overcome quality issues
that are specific to 3D Metal Additive Manufacturing and that are not solved using the post-production quality methods developed
for subtractive manufacturing along with and newly dependent upon CT scanning. The PrintRite3D® suite has the potential to
substantially lower operating costs and can attain higher yields by inspecting parts as they are made and providing machines and
their operators actionable information that includes the options of stopping manufacture of given part(s) while operations continue
to complete parts that are in specification, thus saving time and money while raising yields.
PrintRite3D®
also gives operators information from run-to-run that enables them to ‘learn up’ quality for a given machine by using
PrintRite3D® data about machine behaviors that can then be offset by making adjustments to power settings directed at a given
sector. PrintRite3D®’s (“TED”) feature supersedes and truncates the “reverse engineering” process
of post process inspection described above by providing process engineers the data required to optimize individual machines as
well as machines in series in days or weeks and before serial production is launched rather than months after production and rejection
rates have accrued in costly quantities. PrintRite3D®’s (“TEP”) feature provides machine operators and engineers
with in-process real-time identification of signatures of quality anomalies as they begin to develop and permits terminating or
curing a part in process and provides them with alerts that enable the operators to use the anomalies’ signature information
to know how to adjust the machine controls to cure the problem, or in rare instances, to terminate the part if its cause is reversable.
The
emergence of the 3D Metal Printing Market and Sigma’s place in it
3D
printing (3DP) or additive manufacturing (AM) is challenging the manufacturing world with the breadth of its technological abilities
from rapid design through cost efficient manufacturing to produce complex and unique metal parts. 3D AM technology total industry
sales, including all raw materials used reached $1 billion in 2007, jumped to nearly $7.3 billion in 2017, and were expected by
Wohlers to hit $26.5 billion by 2021. Sectors of the industry have tended so far to grow in step functions as new methods, processes,
and materials have entered the market. Worldwide revenues attributable to 3D manufacturing for metal products were reported at
$88.1 million in 2015 (Wohlers Report 2016, 3D Printing and Additive Manufacturing State of the Industry – Annual Worldwide
Progress Report). By 2017, Wohlers Report stopped estimating annual 3D metal parts revenue, stating that too much of the revenue
is proprietary information and unavailable from aerospace and similar high-tech sectors. Powdered metal suppliers to the AM metal
industry surveyed by Wohlers for their growth forecasts for 2017 for the raw materials used in metal AM parts manufactured averaged
expectations of a 59% increase for 2017. According to Sigma’s experience in costing and pricing the manufacturing of AM
metal parts, as confirmed by consultation with other service providers, the total powdered metal sales forecast for 2017 is enough
raw material to produce a “retail value” of the metal parts of ~$800 million in 2017. Wohler estimates that the fastest
growing sector of the total 3D market into the 2020s is and will be 3D metal printing at a CAGR averaging 30%.
On
another vector, according to Wohlers, an estimated 1,768 metal AM machines were sold in 2017, an increase of 79% over 2016, and
the 2,297 AM Metal machines sold in 2018, an CAGR of 30% over 2017. As large established companies including Toshiba, HP, Lenovo,
Canon and Ricoh in the course of 2016-2017 announced products or intents of entry in AM manufacturing, Electro Optical Systems
(“EOS”), a well-established vendor of AM manufacturing equipment opened a new plant in January 2018 that, according
to EOS, doubled its 2017 capacity to 1,000 units per year. SLM Solutions AG also reportedly expanded into a new factory during
this period. In the same period, over $1 billion growth capital and consolidation capital was invested in the metal sector. General
Electric spent >$1.4 Billion in 2016-2017 acquiring Arcam and Concept Laser thus securing a source of supply for itself as
well as a new OEM capital equipment business. In the same period GE also invested >$100 Million in in Desktop Metal. In October
2018 General Electric announced that it had manufactured and shipped its 30,000th 3D manufactured fuel nozzle, while Airbus was
targeted to grow to taking delivery of up to ~30 tons of metal parts per month by December 2018. 3D metal printers are seeing
rapid adoption, with an installed base of 11,000 globally, with 2,297 sold in 2018 alone at an ASP of $413,000. Extending data
and trends reported by Wohlers above, Sigma’s possible addressable market 2021-2027 is approximately $2 billion –
or a potential $100m revenue for every 5% of market share. The figures in this paragraph are extrapolations from Wohlers and SmarTech
data and forecasts of the total available market for Sigma products; the calculation that 5% of that total available market is
$100m is intended as metric to make the scale of market opportunity more understandable, and it is not a forecast. We believe
there is potential for our PrintRite3D® software to be incorporated into a significant percentage of 3D metal printing devices
made by companies like Additive Industries, ARCAM, Concept Laser, DMG Mori, Electro-Optical Systems (“EOS”), SLM,
Trumpf Industries, Farsoon, Renishaw, Sodick, and others.
Third
Party Competition and Sigma’s Intellectual Property Safeguards
Sigma
is engaged with large companies in several industries including aerospace, defense, oil and gas, bio-medical, and power generation
because both we, and they, agree that they need a common quality standard and third party quality assurance tools for 3D metal
printing that applies to all laser powderbed-made parts regardless of which machine, design, or metal was employed. To date, we
are unaware of any meltpool monitoring products that compete with PrintRite3D that can meet those criteria. Sigma’s thermal
data gathering, and analytical tools provide quality information metrics that correlate to measures of internal metal part design,
conformity, uniformity, and characteristics such as porosity, unsintered material etc. The primary competition to PrintRite 3D
is varying iterations of Optical Tomography (OT). Optical Tomography develops optical data and computer analysis thereof sometimes
linked to simulation tools to predict quality. OT technology does not provide universal thermal-data based metrics of metal quality
that Sigma’s thermal data provides, and which are fundamental to confirming or rejecting parts based on measurable consistency
of material properties.
Sigma
began its investigation and research into optical and thermal data collection and measurement for quality assurance and intervention
approximately 5 years ago and began to develop its intellectual property protection at that time also. The international IP law
firm, Kilpatrick Townsend & Stockton LLP, has advised the Company on building the nets and walls of its patent portfolio,
trade secrets, trademarks, etc. and filed and prosecuted patents as the Company has grown its body of intellectual property.
Sigma Labs, Inc. Patent Portfolio
|
Jurisdiction
|
|
Granted
|
|
|
In Process
|
|
|
Total
|
|
US
|
|
|
11
|
|
|
|
11
|
|
|
|
22
|
|
PCT
|
|
|
-
|
|
|
|
2
|
|
|
|
2
|
|
EP
|
|
|
-
|
|
|
|
4
|
|
|
|
4
|
|
Germany
|
|
|
-
|
|
|
|
4
|
|
|
|
4
|
|
China
|
|
|
-
|
|
|
|
1
|
|
|
|
1
|
|
Japan
|
|
|
-
|
|
|
|
1
|
|
|
|
1
|
|
Korea
|
|
|
-
|
|
|
|
1
|
|
|
|
1
|
|
Total
|
|
|
11
|
|
|
|
24
|
|
|
|
35
|
|
Based
upon the evidence of competitors’ product claims and features reviewed by Sigma to date, it appears to us that Sigma’s
solution to the quality problems of 3D metal printing is a significantly different technological approach than that of our principal
known competition. It continues to appear to us that the intellectual property protection of PrintRite3D’s acuity, meaningful
metrics of thermal data correlated to part quality, and usability of its software accord Sigma freedom to operate with its technology,
and may be a significant barrier to entry to competitors switching over to try to pursue the technology path traveled by Sigma.
Notwithstanding the foregoing, we do understand that technology development is fraught with cases of new approaches and new technologies
emerging and surpassing existing intellectual property protections that looked and were powerful until a form of competition materialized;
there is no assurance that such an event will not take place adversely for Sigma.
Corporate
Information
Our
principal executive offices are located at 3900 Paseo del Sol, Santa Fe, New Mexico 87507, and our current telephone number at
that address is (505) 438-2576. Our website address is www.sigmalabsinc.com. The Company’s annual reports, quarterly reports,
current reports on Form 8-K and amendments to such reports filed or furnished pursuant to section 13(a) or 15(d) of the Securities
Exchange Act of 1934, as amended (the “Exchange Act”), and other information related to the Company, are available,
free of charge, on that website as soon as we electronically file those documents with, or otherwise furnish them to, the SEC.
The Company’s website and the information contained therein, or connected thereto, are not and are not intended to be incorporated
into our filings with the Securities and Exchange Commission. We incorporated as Messidor Limited in Nevada on December 23, 1985
and changed our name to Framewaves Inc. in 2001. On September 27, 2010, we changed our name from Framewaves Inc. to Sigma Labs,
Inc.
The
Offering
Common
stock offered by us
|
|
493,027
shares of common stock issued at the closing of this offering and 22,438 shares of common
stock issuable upon exercise of the pre-funded warrants being offered in this offering.
This prospectus supplement does not relate to the private placement warrants.
|
|
|
|
Pre-funded
warrants offered by us
|
|
Pre-funded
warrants to purchase up to 22,438 shares of our common stock with an unpaid exercise price of $0.0001 per share of our common
stock (approximately $2.781 of the exercise price of each pre-funded warrant will be prepaid to the Company at the closing
of this offering). Each pre-funded warrant will be exercisable to purchase one share of our common stock on or after the issuance
date and will expire on the five-year anniversary of issuance. See “Description of Our Securities.”
|
|
|
|
Common
stock to be outstanding after this offering
|
|
2,562,366
shares, or 2,584,804 shares of our common stock assuming the pre-funded warrants offered in this offering were to be immediately
exercised in full. This amount does not include shares of our common stock issuable upon the exercise of the private
placement warrants.
|
|
|
|
Use
of proceeds
|
|
We
intend to use the net proceeds from this offering to fund our operations, including payment of general and administrative
expenses and for other working capital and general corporate purposes. See “Use of Proceeds” on page S-18.
|
|
|
|
Dividend
policy
|
|
We
do not anticipate paying any cash dividends on our common stock.
|
|
|
|
NASDAQ
Capital Market symbol
|
|
Our
common stock is listed on The NASDAQ Capital Market under the symbol “SGLB.” The pre-funded warrants are not and
will not be listed on The NASDAQ Capital Market or any other securities exchange or nationally recognized trading system.
|
|
|
|
Risk
factors
|
|
Investing
in our securities involves significant risks. See “Risk Factors” beginning on page S-8 of this prospectus supplement
and in the documents incorporated by reference in this prospectus supplement and in the accompanying prospectus.
|
The
number of shares of common stock shown above to be outstanding after this offering is based on 2,069,339 shares outstanding as
of April 1, 2020 and excludes as of such date:
|
●
|
515,465
shares of our common stock subject to the private placement warrants having an exercise price of $2.78 per share
|
|
|
|
|
●
|
172,885 shares
of our common stock subject to outstanding options having a weighted-average exercise price of $15.77 per share;
|
|
|
|
|
●
|
28,986 shares of our common stock reserved
for issuance in connection with future awards under our 2013 stock incentive plans;
|
|
|
|
|
●
|
1,251,347 shares of our common stock subject
to outstanding warrants (excluding the private placement warrants and warrants to purchase our Series D Convertible Preferred
Stock) having a weighted-average exercise price of $14.67 per share;
|
|
|
|
|
●
|
3,020,178
shares of our common stock issuable upon exercise of warrants to purchase shares of our Series D Convertible Preferred Stock
and subsequent conversion into shares of our common stock based on a conversion price of $2.37 on April 1, 2020. See “Description
of Our Securities on page S-19;
|
|
|
|
|
●
|
308,305 shares of
our common stock issuable upon conversion of our Series D Convertible Preferred Stock. See “Description Of Our Securities”
on page S-19;
|
|
|
|
|
●
|
61,651 shares of
our common stock issuable upon conversion of our Series E Convertible Preferred Stock; and
|
|
|
|
|
●
|
41,237
shares of our common stock issuable upon exercise of the
placement agent warrants to be issued in connection with this offering at an exercise price of $3.64 per share. The placement
agent warrants and shares are not covered by this prospectus supplement.
|
RISK
FACTORS
Investing
in our securities involves significant risks. Before making an investment decision, you should carefully consider the risks described
below. If any of these risks occur, our business, financial condition, results of operations, or prospects for commercial success
could be materially and adversely affected, and you could lose all or part of your investment in our securities.
Risks
Related to Our Business
We
have a limited operating history, are not currently profitable and may never become profitable.
We
have incurred losses in every reporting period since we commenced business operations in 2010 and expect to continue to incur
significant losses for the foreseeable future. Our net loss for the years ended December 31, 2019 and 2018 were $6,320,849, and
$5,574,163, respectively. As of December 31, 2019, our accumulated deficit was $26,095,594. There is no assurance that any revenues
we generate will be sufficient for us to become profitable or to maintain profitability. Our revenues for the years ended December
31, 2019 and December 31, 2018 were $402,446 and $388,574, respectively, and our operating expenses for those periods were $6,211,830
and $5,687,271, respectively. Our current revenues are not sufficient to fund our operations. We cannot predict when, if ever,
we might achieve profitability and we are not certain that we will be able to sustain profitability, if achieved. If we fail to
achieve or maintain profitability, the market price of our securities is likely to be adversely affected.
We
will require additional financing to continue our operations, and there is no assurance that we will be able to obtain such financing
on acceptable terms, or at all.
In
January 2020, we completed two private placements consisting of shares of our newly created Series D and Series E Preferred Stock,
warrants to purchase additional shares of Series D Preferred Stock and warrants to purchase shares of our Common Stock resulting
in net cash proceeds to us of approximately $1,711,124. If all of the remaining warrants to purchase shares of Series D Preferred
Stock and Common Stock are exercised by the holders thereof, the potential gross cash proceeds to us will be $13,298,100. Depending
on the amount, if anything, we receive from such exercises and the timing thereof, and the amount of revenues we are able to generate,
we may need to raise additional amounts to fund our operations, maintain compliance with the NASDAQ listing requirements and implement
our business plan. There is no assurance as to the amount and availability of any required future financing or the terms thereof.
Such financing, if in the form of equity, may be highly dilutive to our existing stockholders and may otherwise include onerous
terms. If in the form of debt, such financing may include covenants and repayment obligations which may be difficult to meet and
that could adversely affect our business operations. There is also significant uncertainty from the affect that the novel coronavirus
may have on the availability and type of financing. To the extent that funds are not available to us, we may be required to delay,
limit or terminate our business operations and lose our NASDAQ listing.
Our
limited operating history makes evaluation of our business difficult.
We
commenced business operations in 2010 and are continuing to develop our technologies and to implement our business plan. Our ability
to implement a successful business plan remains unproven, and there is no assurance that we will ever generate sufficient revenues
to sustain our business. Our relatively short operating history, together with the other risks discussed in this “Risk Factors”
section, may make it difficult for you to evaluate our business in connection with making a decision about whether to invest in
our securities.
We
face the risks normally associated with a new business.
We
face all of the risks inherent in a new business, including the expenses, difficulties, complications and delays frequently encountered
in connection with conducting new operations and efforts to develop and commercialize technologies. These uncertainties include
developing our technologies and our brand name, raising capital to meet our working capital requirements and developing a customer
base, among others. If we are not effective in addressing these risks, we will not be able to operate profitably in the future,
and we may not have adequate working capital to meet our obligations as they become due.
Our
business may be adversely affected by a global economic downturn.
Any
economic downturn generally could cause a drop in government spending and business investment, which could have a material adverse
effect on our business. Further, as a result of the current global economic situation, there may be a disruption or delay in performance
by our third-party contractors and suppliers. If such third parties are unable to adequately satisfy their contractual commitments
to us in a timely manner, our business could be adversely affected.
We
could incur significant damages if we are unable to adequately discharge our contractual obligations.
Our
failure to comply with contract requirements or to meet our clients’ performance expectations on a contract could materially
and adversely affect our financial performance and our reputation. This, in turn, would impact our ability to compete for new
clients and contracts. Our failure to meet contractual obligations could also result in substantial actual and consequential damages
under the terms of such contracts. In addition, some of our contracts require us to indemnify clients for our failure to meet
performance standards and/or contain liquidated damages provisions and financial penalties related to performance failures. Although
we do have liability insurance, the policy limits may not be adequate to provide protection against all such potential liabilities.
Some
of our clients may terminate our contracts prior to completion, which could result in revenue shortfalls and reduce profitability
or cause losses on contracts.
Our
small number of our contracts with clients contain initial or base periods of one or more years, as well as option periods typically
covering more than one-half of the contract’s initial duration. However, such clients are under no obligation to exercise
the option to extend the contract term. The profitability of some of our contracts could be adversely impacted if such options
are not exercised and the contract term is not extended accordingly. Additionally, our contracts contain provisions permitting
a client to terminate the contract on short notice, with or without cause. The unexpected termination of significant contracts
could result in significant revenue shortfalls. If revenue shortfalls occur and are not offset by corresponding reductions in
expenses, our business could be adversely affected. We cannot anticipate if, when or to what extent a client might terminate its
contracts with us.
We
are subject to government audits, and our failure to comply with applicable laws, regulations and standards could subject us to
civil and criminal penalties and administrative sanctions.
The
government agencies we contract with have the authority to audit and investigate our contracts with them. As part of that process,
a government agency may review our performance on a contract, our pricing practices, our cost structure and our compliance with
applicable laws, regulations and standards. If the agency determines that we have improperly allocated costs to a specific contract,
we will not be reimbursed for those costs and we will be required to refund the amount of any such costs that have been previously
reimbursed. If a government audit identifies improper activities by us or we otherwise determine that these activities have occurred,
we could be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeitures
of profits, suspension of payments, fines and suspension or disqualification from doing business with the government. Any adverse
determination could adversely impact our ability to bid for Request for Proposals (“RFPs”) in one or more jurisdictions.
We
may not be able to effectively control and manage our growth, which would negatively impact our operations.
We
have operated our current line of business for approximately nine years, and we expect to grow in the near future as our business
develops and becomes established. If our business grows as we anticipate, it will be necessary for us to manage our expansion
in an orderly fashion. Any significant growth in our activities or in the market for our services will require extension of our
managerial, operational, marketing and other resources. Future growth will also impose significant additional responsibilities
upon the members of management to identify, recruit, maintain, integrate, and motivate new employees. Our failure to manage growth
effectively may lead to operational inefficiencies that will have a negative effect on our profitability. Additionally, if our
growth comes at the expense of providing quality service and generating reasonable profits, our ability to successfully bid for
contracts and our profitability will be adversely affected. We cannot assure investors that we will be able to effectively manage
any future growth we may experience.
Failure
to obtain adequate insurance coverage could put us at risk for uninsured losses.
Some
or all of our customers may require insurance as a requirement to conduct business with us. Although
we currently have liability insurance, we may be unable to obtain or maintain adequate liability insurance on acceptable terms,
if at all, and there is a risk that our insurance will not provide adequate coverage against our potential losses. Additionally,
there are certain types of losses that may not be insurable at a cost that we can afford, and insurance may not be available at
any cost with respect to certain losses. Claims or losses in excess of any insurance coverage we may obtain, or the lack of insurance
coverage, could put us at risk of loss for any uninsured loss, which would have a material adverse effect on our business and
financial condition.
We
are dependent on our Executive Chairman, President and Chief Executive Officer and other key personnel, and the loss of any of
these individuals could harm our business.
We
depend on Mark Ruport, our Executive Chairman, John Rice, our President and Chief Executive Officer, as well as key scientific
and other personnel. The loss of any of these individuals could harm our business and significantly delay or prevent the achievement
of our business objectives. In addition, our delivery of services will be labor-intensive: when we are awarded a contract, we
may need to quickly hire project leaders and project management personnel. The additional staff may also create a concurrent demand
for increased administrative personnel. The success of our business will require that we attract, develop, motivate and retain:
|
●
|
experienced and
innovative executive officers;
|
|
|
|
|
●
|
senior managers
who have successfully managed or designed programs in the public sector; and
|
|
|
|
|
●
|
information technology
professionals who have designed or implemented complex information technology projects.
|
Innovative,
experienced and technically proficient individuals are in great demand and are likely to remain a limited resource. We may be
unable to continue to attract and retain desirable executive officers, senior managers, and technology professionals. Our inability
to hire sufficient personnel on a timely basis or the loss of significant numbers of executive officers and senior managers could
adversely affect our business.
We
may be dependent on cash flow and payments from customers in order to meet our expense obligations.
A
number of factors may cause our revenues, cash flow and operating results to vary from quarter to quarter, including the following:
|
●
|
the progression of contracts;
|
|
|
|
|
●
|
the commencement,
completion or termination of contracts during any particular quarter;
|
|
|
|
|
●
|
the schedules of
government agencies and large multinational corporations for awarding contracts;
|
|
|
|
|
●
|
the failure of our
customers to fulfill their obligations under contracts with us; and
|
|
|
|
|
●
|
the term of awarded
contracts and potential acquisitions.
|
Changes
in the volume of activity and the number of contracts commenced, completed or terminated during any quarter may cause significant
variations in our cash flow from operations because a significant portion of our expenses are fixed. Fixed expenses include, rent,
payroll, insurance, employee benefits, taxes and other administrative costs and overhead. Moreover, we expect to incur significant
operating expenses during the start-up and early stages of large contracts and typically do not receive corresponding payments
in that same quarter.
We
may make acquisitions in the future that we are unable to effectively manage given our limited resources.
We
may choose to grow our business by acquiring other entities. We may be unable to manage businesses that we have acquired or to
integrate them successfully without incurring substantial expenses, delays or other problems that could negatively impact our
results of operations. Moreover, business combinations involve additional risks, including:
|
●
|
diversion of management’s
attention;
|
|
|
|
|
●
|
loss of key personnel;
|
|
|
|
|
●
|
our becoming significantly
leveraged as a result of the incurrence of debt to finance an acquisition;
|
|
|
|
|
●
|
assumption of unanticipated
legal or financial liabilities;
|
|
|
|
|
●
|
unanticipated operating,
accounting or management difficulties in connection with the acquired entities;
|
|
|
|
|
●
|
amortization of
acquired intangible assets, including goodwill; and
|
|
|
|
|
●
|
dilution to existing
stockholders and our earnings per share.
|
Also,
client dissatisfaction or performance problems with an acquired firm could materially and adversely affect our reputation as a
whole. Further, the acquired businesses may not achieve the revenues and earnings that we anticipated.
We
may be unable to develop or commercialize new and rapidly evolving technologies.
Many
of our activities involve developing products or processes that are based upon new, rapidly evolving technologies. The ability
to commercialize or further develop these technologies could fail for a variety of reasons, both within and outside of our control.
We
may be unable to protect our intellectual property rights.
Our
success in part depends on the ability to protect our intellectual property and proprietary technology. To do so, we will be required
to prosecute patent applications and maintain patents, obtain new patents and pursue trade secret and other intellectual property
protection. We filed thirty-three foreign and U.S. patent applications pertaining to our IPQA® technology and rapid qualification
of additive manufacturing for metal parts. We have been awarded eleven U.S. patents. However, the efforts we have taken to protect
our proprietary rights may not be sufficient or effective. There can be no assurance that our program for protection of intellectual
property and proprietary technology will be sufficient to protect our intellectual property and proprietary technology from competitors.
Our business is also subject to the risk that our issued patents will not provide us with significant competitive advantages if,
for example, a competitor was to independently develop or obtain similar or superior technologies. In addition, our issued patents
may be challenged or infringed upon by third parties. The enforcement of intellectual property rights is subject to considerable
uncertainty and can be expensive and time-consuming. Patent reform laws and court decisions interpreting such laws, may create
additional uncertainty around our ability to obtain and enforce patent protection. Any significant impairment of our intellectual
property rights could harm our business and our ability to compete. The unauthorized use of our intellectual property could make
it more expensive to do business and harm our operating results. Proprietary trade secrets and unpatented know-how are also very
important to our business; however, trade secrets are difficult to protect. Our employees, consultants, contractors, outside scientific
collaborators and other advisors may unintentionally or willfully disclose our confidential information to competitors, and confidentiality
agreements may not provide an adequate remedy in the event of unauthorized disclosure of confidential or proprietary information.
We
may be sued by third parties who claim that we have infringed their intellectual property rights.
We
may be exposed to future litigation by third parties based on claims that our research, development and commercialization activities
infringe the intellectual property rights of third parties to which we do not hold licenses or other rights, or that we have misappropriated
the trade secrets of others. Any litigation or claims against us, whether or not valid, could result in substantial costs, and
could place a significant strain on our financial and human resources. In addition, if successful, such claims could cause us
to pay substantial damages. Furthermore, because of the substantial amount of discovery required in connection with intellectual
property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this
type of litigation.
Our
services are subject to government regulation, changes in which may have an adverse effect on us.
Our
business activities subject us to a variety of federal, state and local laws and regulations. For example, we could be required
to comply with applicable provisions of the International Traffic in Arms Regulations (“ITAR”), as well as other export
controls and laws governing the manufacture and distribution of munitions technology. Changes in the laws and regulations applicable
to our business activities may have an adverse effect on our operations and profitability by making it more expensive and less
profitable for us to do business. Additionally, the market for our services depends largely on federal and state legislative programs.
These programs can be modified or amended at any time by acts of federal and state governments. Further, if additional programs
are not proposed or enacted, or if previously enacted programs are challenged, repealed or invalidated, our growth strategy could
be adversely impacted.
Our
bylaws contain provisions indemnifying our officers and directors against all costs, charges, and expenses incurred by them.
Our
Bylaws contain provisions with respect to the indemnification of our officers and directors against all costs, charges and expenses
actually and reasonably incurred by an officer or director paid to settle an action or satisfy a judgment in a civil, criminal
or administrative action or proceeding to which he is made a party by reason of being or having been one of our directors or officers.
To the extent that our directors’ and officers’ insurance policy does not provide reimbursement for such costs, charges,
expenses and other amounts, we may incur substantial expenses in satisfying our indemnification obligations.
Our
operating costs could be significantly higher than we expect, and this could reduce our future profitability.
In
addition to general economic conditions, market fluctuations and international risks, significant increases in operating, development
and implementation costs could adversely affect us due to numerous factors, many of which are beyond our control.
A
cyber incident could result in information theft, data corruption, operational disruption and/or financial loss.
Businesses
have become increasingly dependent on digital technologies to conduct day-to-day operations. At the same time, cyber incidents,
including deliberate attacks or unintentional events, have increased. A cyber-attack could include gaining unauthorized access
to digital systems for purposes of misappropriating assets or sensitive information, corrupting data, or causing operational disruption
or result in denial of service on websites. We depend on digital technology, including information systems and related infrastructure,
to process and record financial and operating data, and communicate with our employees and business partners. Our technologies,
systems, networks, and those of our business partners may become the target of cyber-attacks or information security breaches
that could result in the unauthorized release, gathering, monitoring, misuse, loss or destruction of proprietary and other information,
or other disruption of our business operations. Although to date we have not experienced any losses relating to cyber-attacks,
there is no assurance that we will not suffer such losses in the future. As cyber threats continue to evolve, we may be required
to expend significant additional resources to continue to modify or enhance our protective measures or to investigate and remediate
any information security vulnerabilities.
Our
results of operations may be negatively impacted by the coronavirus outbreak.
In
December 2019, the 2019 novel coronavirus surfaced in Wuhan, China. The World Health Organization declared a global emergency
on January 30, 2020, with respect to the outbreak and several countries, including the United States have initiated travel restrictions,
and residents of several territories are currently under so-called Stay-at-Home orders. The impacts of the outbreak are unknown
and rapidly evolving.
A
widespread health crisis could adversely affect the global economy, resulting in an economic downturn that could impact demand
for our technology and products. To date the outbreak has not had a material adverse impact on our operations. However, the future
impact of the outbreak is highly uncertain and cannot be predicted and there is no assurance that the outbreak will not have a
material adverse impact on the future results of the Company. The extent of the impact, if any, will depend on future developments,
including actions taken to contain the coronavirus.
Risks
Related to Our Securities
The
price of our securities could be subject to volatility related or unrelated to our operations, which could result in substantial
losses for our stockholders.
Between
January 1, 2019 and March 31, 2020, the trading price of our common stock has ranged from a low of $2.26 to a high of $10.30
and could be subject to wide fluctuations in the future in response to various factors, some of which are beyond our control.
The trading price of the warrants that we issued in our recent public offering could be subject to similar fluctuations as a result
of such factors. These factors include those discussed previously in this “Risk Factors” section and others, such
as:
|
●
|
delays or failures
in the commercialization of our current or future products and services;
|
|
|
|
|
●
|
quarterly variations
in our results of operations or those of our competitors;
|
|
|
|
|
●
|
changes in our earnings
estimates or recommendations by securities analysts or adverse publicity about us or our products or services;
|
|
|
|
|
●
|
announcements by
us or our competitors of new products and services, significant contracts, commercial relationships, acquisitions or capital
commitments;
|
|
|
|
|
●
|
adverse developments
with respect to our intellectual property rights;
|
|
|
|
|
●
|
commencement of
litigation involving us or our competitors;
|
|
|
|
|
●
|
any major changes
in our board of directors or management;
|
|
|
|
|
●
|
market conditions
in our industry; and
|
|
|
|
|
●
|
general economic
conditions in the United States and abroad.
|
In
addition, the stock market, in general, may experience broad market fluctuations, which may adversely affect the market price
or liquidity of our securities.
We
could be subject to securities class action litigation.
Any
sudden decline in the market price of our securities could trigger securities class action lawsuits against us. If any of our
stockholders were to bring such a lawsuit against us, we could incur substantial costs defending the lawsuit and the time and
attention of our management would be diverted from our business and operations. We also could be subject to damages claims if
we are found to be at fault in connection with a decline in our market price of our securities.
An
active trading market in our securities may not develop, and you may therefore have difficulty selling your securities at a price
that you determine is satisfactory.
Although
our common stock and the 2017 warrants are listed on The NASDAQ Capital Market, our common stock and warrants trade infrequently
and in low volumes. There is no assurance that such securities will trade in the public market at or above a price that you consider
acceptable. Furthermore, there is no assurance that an active trading market for any of our securities will develop or be sustained.
If an active market for our securities does not develop or is not maintained, it may be difficult for you to sell your securities
when you wish to sell them or at a price that you consider satisfactory. An inactive trading market may also impair our ability
to raise capital to continue to fund operations by selling securities and may impair our ability to acquire other companies or
technologies by using our securities as consideration.
There
is no assurance that we will satisfy the continued listing requirements of The NASDAQ Capital Market.
We
cannot assure you that we will be able to satisfy or regain compliance with the continued listing requirements of The Nasdaq Capital
Market. For example, there is no assurance that we will be able to satisfy all of the quantitative continued listing requirements,
including the minimum stockholders’ equity requirement of at least $2,500,000 for continued listing on The Nasdaq Capital
Market. On April 8, 2019, Nasdaq notified us that we did not comply with the minimum $2,500,000 stockholders’ equity requirement
for continued listing on The Nasdaq Capital Market under Nasdaq Listing Rule 5550(b)(1). In our Form 8-K filed on September 4,
2019, we disclosed that we had regained compliance with such rule as a result of our August 2019 underwritten public offering.
On October 8, 2019, we received a letter from Nasdaq notifying us that, as a result of such offering, Nasdaq determined that we
were in compliance with the minimum $2,500,000 stockholders’ equity requirement for continued listing on The Nasdaq Capital
Market under Nasdaq Listing Rule 5550(b)(1), but that if we do not demonstrate continued compliance with such rule as of December
31, 2019, the Company’s common stock may be subject to delisting. On January 7, 2020, we received a letter from Nasdaq notifying
the Company that we are no longer in compliance with the minimum stockholders’ equity requirement for continued listing
on the Nasdaq Capital Market. On February 4, 2020 we submitted to Nasdaq our plan to regain compliance. On March 18, 2020, we
received a letter from Nasdaq notifying us that our plan was accepted. Accordingly, the Company must provide an update to Nasdaq
by April 15, 2020 regarding the status of any exercises of warrants issued in the January 2020 private placement, and by June
30, 2020, the Company must evidence compliance with the stockholders’ equity requirement. There can be no assurance that
the Company will be able to regain compliance. If the Company does not evidence compliance by June 30, 2020, or if the Company
fails to satisfy another Nasdaq requirement for continued listing, Nasdaq could provide notice that the Company’s common
stock will become subject to delisting. In such event, Nasdaq rules would permit the Company to appeal the decision to reject
the Company’s proposed compliance plan or any delisting determination to a Nasdaq Hearings Panel. If our securities are
de-listed from The Nasdaq Capital Market, our stockholders could incur material adverse consequences such as reduced liquidity
for their securities and reduced market prices for their securities. Following such de-listing, we could encounter increased difficulty
in issuing additional securities at an attractive price, or at all, in order to fund our operations.
You
may experience additional dilution as a result of future equity offerings.
In
order to raise additional capital, we may in the future offer additional shares of our common stock or other securities convertible
into or exchangeable for our common stock. The price per share at which we sell additional shares of our common stock, or securities
convertible or exchangeable into common stock, in future transactions may be lower than the price per share that you paid for
our common stock.
We
have broad discretion in the use of the net proceeds of our recent public and private offerings and may not use them effectively.
We
intend to use our cash for the development of our products and services. Our management has broad discretion in the use of cash
and will have the right to use our cash in ways that differ substantially from our current plans. Management may spend our cash
in ways that do not improve our results of operations or enhance the value of our securities. The failure by management to apply
funds effectively could result in financial losses that could have a material and adverse effect on our business and cause the
market price of our securities to decline.
We
do not intend to pay dividends on our common stock, and your ability to achieve a return on your investment will depend on appreciation
in the market price of our securities.
We
currently intend to invest our future earnings, if any, to fund our growth and not to pay any cash dividends on our common stock.
Since we do not intend to pay dividends, your ability to receive a return on your investment will depend on any future appreciation
in the market price of our securities. There is no assurance that our securities will appreciate in price.
If
securities or industry analysts do not publish research or reports about us, or if they issue adverse or misleading opinions regarding
us or our securities, the market price of our securities and their trading volume could decline.
If
we do not obtain and maintain research coverage by securities and industry analysts, the market price for our securities may be
adversely affected. The market price of our securities also may decline if any analyst who covers us issues an adverse or erroneous
opinion regarding us, our business model, our intellectual property or our performance. If one or more analysts cease coverage
of us or fail to regularly publish reports on us, we could lose visibility in the financial markets, which could cause the market
price of our securities and their trading volume to decline and possibly adversely affect our ability to engage in future financings.
Sales
of a substantial number of shares of our common stock in the public market could cause our stock price to fall.
Sales
of a substantial number of shares of our common stock in the public market could occur at any time. These sales, or the perception
in the market that the holders of a large number of shares intend to sell shares, could reduce the market price of our common
stock. As of December 31, 2019, we had 1,403,759 outstanding shares of common stock. Sales of a large number of the shares described
in the preceding sentence or upon exercise of our outstanding warrants and stock options, or the perception that a large number
of shares may be sold, could have a material adverse effect on the trading price of our common stock. On January 27, 2020, we
entered into a Securities Purchase Agreement (the “SPA”) with certain institutional investors (the “Institutional
Private Placement”). Pursuant to the SPA, we issued and sold 1,640 shares of the Company’s Series D Convertible Preferred
Stock, warrants to purchase 779,600 shares of the Company’s Common Stock (the “Common Warrants”) and warrants
to purchase 6,156 shares of the Series D Preferred Stock (the “Preferred Warrants”). The Series D Preferred Stock
has an initial stated value of $1,000 per share (the “Stated Value”). Dividends at a dividend rate of 9% per annum
of Stated Value will accrue and, on a monthly basis, will be payable in kind by the increase of the Stated Value of the Series
D Preferred Shares by such amount. The holders of the Series D Preferred Shares will have the right to convert the Series D Preferred
Shares (including, without limitation, make-whole dividends (the amount of any dividends that, but for the conversion, would have
accrued at the dividend rate for the period through the third anniversary of the initial issuance date)) into shares of the Company’s
Common Stock (the “Conversion Shares”) at the conversion price then in effect (initially $10.00). A holder may at
any time convert the Series D Preferred Shares at an alternative conversion price, equal to the lower of the applicable conversion
price then in effect, and the greater of (x) $1.80 and (y) 85% of the average volume weighted average price (“VWAP”)
of our Common Stock for a five (5) trading day period prior to such conversion. The initial exercise price of the Common Warrants
is $10.00. The Preferred Warrants have a term of one year from the date that the securities referenced in the SPA become fully
tradeable. The initial exercise price for the Preferred Warrants is $975 per share.
As
a result of the Institutional Private Placement, if all the Series D Preferred Shares are converted at the lowest possible conversion
price ($1.80) and all the Common Warrants are exercised at the initial exercise price of $10.00 per share, we will be obligated
to issue an aggregate of 6,280,111 shares. A registration statement covering the resale of such shares has been declared effective,
and, as of April 1 2020, 659,823 shares have been issued pursuant to the conversion of Series D Preferred Shares and sold into
the public market. We anticipate that the holders of the Series D Preferred Shares will continue to convert their preferred shares
and publicly sell the resulting common shares which will likely put pressure on the market price of our stock. Concurrently with
the Institutional Private Placement, we also sold 333.33 shares of our Series E Preferred Stock and warrants to purchase 48,544
shares of our common stock. The Series E Preferred Stock is initially convertible into 48,544 shares of Common Stock. We also
issued to Dawson James Securities, Inc. our placement agreement in these private placements, warrants to purchase up to 17,004
shares of our common stock.
We
will incur significant costs to ensure compliance with U.S. and NASDAQ reporting and corporate governance requirements.
We
incur significant costs associated with our public company reporting requirements and with applicable U.S. and NASDAQ corporate
governance requirements, including requirements under the Sarbanes-Oxley Act of 2002 and other rules implemented by the SEC and
NASDAQ. These applicable rules and regulations also make it more difficult and more expensive for us to obtain director and officer
liability insurance and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to
obtain the same or similar coverage. As a result, it may be difficult for us to attract and retain qualified individuals to serve
on our board of directors or as executive officers.
If
we fail to maintain effective internal control over financial reporting, the market price of our securities may be adversely affected.
As
a public reporting company, we are required to establish and maintain effective internal control over financial reporting. Failure
to establish such internal control, or any failure of such internal control once established, could adversely impact our public
disclosures regarding our business, financial condition or results of operations. Any failure of our internal control over financial
reporting could also prevent us from maintaining accurate accounting records and discovering accounting errors and financial frauds.
Rules
adopted by the SEC pursuant to Section 404 of the Sarbanes-Oxley Act of 2002 require annual assessment of our internal control
over financial reporting. The standards that must be met for management to assess the internal control over financial reporting
as effective are complex, and require significant documentation, testing and possible remediation to meet the detailed standards.
We may encounter problems or delays in completing activities necessary to make an assessment of our internal control over financial
reporting. If we cannot assess our internal control over financial reporting as effective, investor confidence and share value
may be negatively impacted. In addition, management’s assessment of internal control over financial reporting may identify
weaknesses and conditions that need to be addressed in our internal control over financial reporting or other matters that may
raise concerns for investors. Any actual or perceived weaknesses and conditions that need to be addressed in our internal control
over financial reporting (including those weaknesses identified in our periodic reports), or disclosure of management’s
assessment of our internal control over financial reporting may have an adverse impact on the price of our securities.
Provisions
in our articles of incorporation and bylaws could discourage a takeover that stockholders may consider favorable and may lead
to entrenchment of management.
Our
articles of incorporation and bylaws contain provisions that could delay or prevent changes in control or changes in our management
without the consent of our board of directors. These provisions include the following:
|
●
|
a classified board
of directors with three-year staggered terms, which may delay the ability of stockholders to change the membership of a majority
of our board of directors;
|
|
|
|
|
●
|
no cumulative voting
in the election of directors, which limits the ability of minority stockholders to elect director candidates;
|
|
|
|
|
●
|
the exclusive right
of our board of directors to elect a director to fill a vacancy created by the expansion of the board of directors or the
resignation, death or removal of a director, which prevents stockholders from being able to fill vacancies on our board of
directors;
|
|
|
|
|
●
|
the ability of our
board of directors to authorize the issuance of additional shares of preferred stock and to determine the terms of those shares,
including preferences and voting rights, without stockholder approval, which could adversely affect the rights of our common
stockholders or be used to deter a possible acquisition of our company;
|
|
|
|
|
●
|
the ability of our
board of directors to alter our bylaws without obtaining stockholder approval;
|
|
●
|
the required approval
of the holders of at least two-thirds of the shares entitled to vote at an election of directors to adopt, amend or repeal
our bylaws or repeal the provisions of our articles of incorporation and bylaws regarding the election and removal of directors;
|
|
|
|
|
●
|
a prohibition on
stockholder action by written consent, which forces stockholder action to be taken at an annual or special meeting of our
stockholders;
|
|
|
|
|
●
|
the requirement
that a special meeting of stockholders may be called only by the chairman of the board of directors, the chief executive officer,
the president or the board of directors, which may delay the ability of our stockholders to force consideration of a proposal
or to take action, including the removal of directors; and
|
|
|
|
|
●
|
advance notice procedures
that stockholders must comply with in order to nominate candidates to our board of directors or to propose matters to be acted
upon at a stockholders’ meeting, which may discourage or deter a potential acquirer from conducting a solicitation of
proxies to elect the acquirer’s own slate of directors or otherwise attempting to obtain control of us.
|
|
|
|
|
●
|
the ability of our
directors to issue one or more series of preferred stock with dividend, liquidation, conversion, voting or other rights which
would dilute the interest of or impair the voting power of our common stockholders.
|
These
provisions could inhibit or prevent possible transactions that some stockholders may consider attractive.
We
recently issued Series D and Series E Preferred Stock and could issue one or more additional series of shares of preferred stock
with the effect of diluting existing stockholders and impairing their voting and other rights.
As
indicated above, we have recently completed the sale of shares of our Series D and Series E Preferred Stock together with warrants
to purchase our common stock and additional shares of our Series D Preferred Stock. In addition to the possible negative effect
on the market price of our common shares resulting from the public sale or perceived sale of common shares issuable upon conversion
or exercise of these securities, the Certificate of Designations for the Series D Preferred Stock provides that upon occurrence
of certain triggering events described in the Certificate, including but not limited to, payment defaults, breaches of the transaction
documents pertaining to the Series D Preferred Stock and failure to maintain listing on the NASDAQ Capital Market, the Series
D Preferred Shares would become subject to redemption, at the option of the holder, at a 125% premium to the underlying value
of the Series D Shares being redeemed. Any redemption would require a significant cost outlay by us.
Risks
Relating to this Offering
Management
will have broad discretion as to the use of the net proceeds of this offering.
We
currently anticipate using the net proceeds from the sale of securities hereunder to fund our operations, including payment of
general and administrative expenses, and for other working capital and general corporate purposes. We have not reserved or allocated
amounts for any specific purposes, however, and we cannot specify with certainty how we will use any net proceeds. Accordingly,
our management will have considerable discretion in the application of the net proceeds and you will not have the opportunity,
as part of your investment decision, to assess whether the proceeds are being used appropriately. The net proceeds of this offering
may be used for corporate purposes that do not benefit our company or increase our market value. Until the net proceeds are used,
they may be placed in investments that may not produce income or that may lose their value.
Investors
will experience immediate and substantial dilution.
You
will suffer immediate and substantial dilution. See the “Dilution” section in this prospectus supplement for more
information about the dilution you will incur in this offering.
CAUTIONARY
NOTE REGARDING FORWARD-LOOKING STATEMENTS
Some
of the statements contained or incorporated by reference in this prospectus supplement or in the accompanying prospectus may include
forward-looking statements that reflect our current views with respect to our research and development activities, business strategy,
business plan, financial performance and other future events. These statements include forward-looking statements both with respect
to us, specifically, and our industry sector, in general. We make these statements pursuant to the safe harbor provisions of the
Private Securities Litigation Reform Act of 1995. Statements that include the words “expect,” “intend,”
“plan,” “believe,” “project,” “estimate,” “may,” “should,”
“anticipate,” “will” and similar statements of a future or forward-looking nature identify forward-looking
statements for purposes of the federal securities laws or otherwise.
All
forward-looking statements involve inherent risks and uncertainties, and there are or will be important factors that could cause
actual results to differ materially from those indicated in these statements. We believe that these factors include, but are not
limited to, those factors set forth in the “Risk Factors” section of this prospectus supplement, all of which you
should review carefully. Please consider our forward-looking statements in light of those risks as you read this prospectus supplement
and the accompanying prospectus. We undertake no obligation to publicly update or review any forward-looking statement, whether
as a result of new information, future developments or otherwise.
If
one or more of these or other risks or uncertainties materializes, or if our underlying assumptions prove to be incorrect, actual
results may vary materially from what we anticipate. All subsequent written and oral forward-looking statements attributable to
us or to individuals acting on our behalf are expressly qualified in their entirety by this Note. Before purchasing any of our
securities, you should consider carefully all of the factors set forth or referred to in this prospectus supplement and in the
accompanying prospectus that could cause actual results to differ.
USE
OF PROCEEDS
We
estimate that the net proceeds from this offering, after deducting placement agent fees and estimated offering expenses payable
by us, will be approximately $1,230,000.
We
currently intend to use the net proceeds, if any, from the sale of our securities in this offering for our operations, including
payment of general and administrative expenses and other working capital and general corporate purposes.
We
have not determined the amounts we plan to spend on any of the areas listed above or the timing of these expenditures. As a result,
our management will have broad discretion to allocate the net proceeds from this offering. Pending application of the net proceeds
as described above, we expect to invest the net proceeds in investment-grade, interest-bearing securities.
DIVIDEND
POLICY
Our
business requires significant funding. We currently plan to invest all available funds and any future earnings in our business
and do not anticipate paying any cash dividends on our common stock in the foreseeable future. We currently are prohibited by
the terms of our outstanding indebtedness from paying dividends on our common stock, except with the prior consent of our lender.
DILUTION
Our net tangible book
value as of December 31, 2019 was approximately $82,908 or $0.06 per share of common stock. Net tangible book value per share
is calculated by subtracting our total liabilities from our total tangible assets, which is total assets less intangible assets,
and dividing this amount by the number of shares of common stock outstanding. After giving effect to the sale of common shares
and pre-funded warrants in this offering (excluding 515,465 shares of common stock issuable upon exercise of the private placement
warrants) and after deducting placement agent fees estimated offering expenses payable by us, we would have had a net tangible
book value as of December 31, 2019 of approximately $1,312,908, or $0.68 per share of common stock. This represents an immediate
increase in net tangible book value of $0.62 per share to our existing stockholders and an immediate dilution
in net tangible book value of $2.23 per share to investors in this offering. The following table illustrates this dilution:
Public offering price per share
|
|
$
|
2.91
|
|
|
|
|
|
Net tangible book value per share as of December 31, 2019
|
|
$
|
0.06
|
|
|
|
|
|
Increase per share attributable to this offering
|
|
$
|
0.62
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
As adjusted net tangible book per share after this offering
|
|
|
|
|
|
$
|
0.68
|
|
|
|
|
|
|
|
|
|
|
Net dilution per share to investors in this offering
|
|
|
|
|
|
$
|
2.23
|
|
The
number of shares of common stock shown above to be outstanding after this offering is based on 1,403,759 shares outstanding as
of December 31, 2019, and does not reflect the potential dilution from the exercise of outstanding options or warrants to purchase
shares of our common stock or from the conversion of our outstanding shares of Series D and Series E of convertible preferred
stock.
CAPITALIZATION
The
following table sets forth our cash and cash-equivalents and our capitalization as of December 31, 2019 as follows:
|
●
|
On an actual basis;
and
|
|
|
|
|
●
|
On an as-adjusted
basis to give effect to our issuance and sale of 515,465 shares (including pursuant to the exercise of the pre-funded warrants)
in this offering at the public offering price of $2.91 per share, after deducting the placement agent fees and estimated offering
expenses payable by us, and excluding the proceeds, if any, from the exercise of the warrants issued in this offering.
|
You
should read the information in the following table in conjunction with our consolidated financial statements and the related notes
and the section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations”
contained in our Annual Report on Form 10-K for the year ended December 31, 2019 filed with the SEC and incorporated by reference
in this prospectus supplement and in the accompanying prospectus.
|
|
As of December 31, 2019
|
|
|
|
Actual
|
|
|
As adjusted for this offering
|
|
|
|
(unaudited)
|
|
Cash
|
|
$
|
86,919
|
|
|
$
|
1,312,908
|
|
|
|
|
|
|
|
|
|
|
Stockholders’ equity
|
|
|
|
|
|
|
|
|
Preferred stock, par value $0.001 per share; 10,000,000 shares
authorized, 0 shares issued and outstanding
|
|
|
-
|
|
|
|
-
|
|
Common stock, par value $0.001 per share; 22,500,000 shares authorized, 14,037,590 shares
issued and outstanding, actual; 1,403,759 shares issued and outstanding as adjusted(1)
|
|
|
1,404
|
|
|
|
1,919
|
|
Additional paid-in capital
|
|
|
26,746,439
|
|
|
|
27,975,923
|
|
Accumulated deficit
|
|
|
(26,095,594
|
)
|
|
|
(26,095,594
|
)
|
Total stockholders’ equity
|
|
|
652,249
|
|
|
|
1,882,249
|
|
Total liabilities and stockholders’ equity
|
|
$
|
1,691,468
|
|
|
$
|
2,921,468
|
|
|
(1)
|
The number of shares
reflect a reverse stock split of 1 to 10 effected on February 27, 2020.
|
DESCRIPTION
OF OUR SECURITIES
Securities
In This Offering and the Related Private Placement
The
following summary of the securities in this offering and the related private placement does not purport to be complete and is
qualified in its entirety by the disclosure and exhibits set forth in our Current Report on Form 8-K filed with the SEC on April
3, 2020, which are incorporated by reference herein.
Pursuant
to a Securities Purchase Agreement dated as of April 2, 2020, we have agreed to sell and issue to certain institutional investors
515,465 units for a purchase price of $2.91 per unit as follows:
|
●
|
493,027
units each consisting of one share of our common stock and a Series A Warrant to purchase one share of our common stock (which
we have referred to herein as the “private placement warrant”); and
|
|
|
|
|
●
|
22,438
units consisting of a pre-funded warrant to purchase one share of our common stock and
one private placement warrant to purchase one share of our common stock.
|
Only
the 493,027 shares of our common stock, pre-funded warrants to purchase 22,438 shares of our common stock and the underlying
shares of our common stock are being offered and issued pursuant to this prospectus supplement. The private placement warrant
and underlying shares of our common stock are being issued in a private placement and not part of this offering.
For a description of the
shares of our common stock, see Description of Our Securities – Common Stock on page S-22 below.
Description
of Pre-Funded Warrants
The
offering and sale of the pre-funded warrants (and the underlying shares of our common stock) are being registered pursuant to
this prospectus supplement.
Term
The
pre-funded warrants are immediately exercisable into up to
22,438 shares of our common stock as of the date of issuance and expire five years from the date of issuance.
Exercise
Price; Cashless Exercise
Each
pre-funded warrant has an original exercise price of
$2.782 per share, with approximately $2.781 of the exercise price of each pre-funded warrant to be prepaid
to the Company at the closing of the offering. Holders of pre-funded warrants may exercise each pre-funded warrant
by paying the remaining exercise price of $0.001 per share of our common stock in cash or on a cashless basis.
Limitations
on Exercise
Each
holder of pre-funded warrants will be prohibited, subject to certain exceptions, from exercising the pre-funded warrants
for shares of our common stock to the extent that immediately prior to or after giving effect to such exercise, the holder, together
with its affiliates and other attribution parties, would own more than 9.99% of the total number of shares of our common
stock then issued and outstanding, which percentage may be changed at the holders’ election to a higher or lower percentage
not in excess of 9.99% upon 61 days’ notice to the Company subject to the terms of the pre-funded warrant.
Fundamental
Transactions
The
pre-funded warrants prohibit us from entering into specified transactions involving a change of control, unless the successor
entity assumes all of our obligations under the pre-funded warrants under a written agreement before the transaction is completed.
The pre-funded warrants are also subject to redemption by the Company in cash upon a fundamental transaction at the Black-Scholes
value of the pre-funded warrants.
Description
of Private Warrants
The
Private Warrants (and the underlying shares of our common stock) are not being registered pursuant to this prospectus supplement
and will be issued directly to certain institutional investors in reliance upon the exemption from registration provided by Section
4(a)(2) of the Securities Act, of 1933, as amended and Regulation D promulgated thereunder.
Term
The
private placement warrants will initially become exercisable into up to 515,465 shares of our common stock as of the six month
and one day anniversary of the issuance date and will expire five years from the date of issuance
Exercise
Price; Cashless Exercise
Each
private placement warrant has an exercise price of $2.782 per share. The private placement warrants may be exercised for cash,
provided that, if there is no effective registration statement available registering the exercise of the private placement warrants,
the private placement warrants may be exercised on a cashless basis. We anticipate that we will file a registration statement
covering the shares of common stock issuable upon the exercise of the private placement warrants prior to the time the private
placement warrants become exercisable. If we obtain the approval of our stockholders to permit the issuances of securities pursuant
to the private placement warrant below $2.782 per share, each private placement warrant will be subject to full ratchet antidilution
protection (on both exercise price and aggregate number of shares issuable thereunder) upon our consummation of a subsequent placement
at a price less than $2.782 per share, if any. We have agreed to seek such stockholder approval at our next annual meeting of
stockholders of the Company.
Limitations
on Exercise
Each
holder of private placement warrant will be prohibited, subject to certain exceptions, from exercising the private placement warrants
for shares of our common stock to the extent that immediately prior to or after giving effect to such exercise, the holder, together
with its affiliates and other attribution parties, would own more than 4.99% or 9.99% (which percentage is elected at each holder’s
discretion prior to the issuance of the private placement warrant) of the total number of shares of our common stock then issued
and outstanding, which percentage may be changed at the holders’ election to a higher or lower percentage not in excess
of 9.99% upon 61 days’ notice to the Company subject to the terms of the private placement warrant.
Fundamental
Transactions
The
private placement warrants prohibit us from entering into specified transactions involving a change of control, unless the successor
entity assumes all of our obligations under the private placement warrants under a written agreement before the transaction is
completed. The private placement warrants are also subject to redemption by the Company in cash upon a fundamental transaction
at the Black-Scholes value of the private placement warrants.
Authorized
Capital Stock
We
are presently authorized to issue 8,000,000 shares of common stock, $0.001 par value per share, of which 2,069,339 shares were
outstanding as of April 1, 2020. We are presently authorized to issue 10,000,000 shares of $0.001 par value preferred stock, of
which 1,610,000 shares have been designated “Series A Preferred Stock,” 1,000 shares have been designated “Series
B Convertible Preferred Stock,” 1,500 shares have been designated “Series C Convertible Preferred Stock,” 7,796
shares have been designated as “Series D Convertible Stock” and 500 shares have been designated as “Series E
Convertible Stock.” As of the date hereof, we had no shares of Series A Preferred Stock, Series B Convertible Preferred
Stock and Series C Convertible Stock issued and outstanding, 575 shares of Series D Convertible Preferred Stock issued and outstanding
and 333.33 shares of Series E Convertible Preferred Stock issued and outstanding.
Common
Stock
We
have one class of common stock. Holders of our common stock are entitled to one vote per share on all matters to be voted upon
by stockholders and do not have cumulative voting rights in the election of directors. Holders of shares of common stock are entitled
to receive on a pro rata basis such dividends, if any, as may be declared from time to time by our board of directors in its discretion
from funds legally available for that use, subject to any preferential dividend rights of outstanding preferred stock. They are
also entitled to share on a pro rata basis in any distribution to our common stockholders upon our liquidation, dissolution or
winding up, subject to the prior rights of any outstanding preferred stock. Common stockholders do not have preemptive rights
to subscribe to any additional stock issuances by us, and they do not have the right to require the redemption of their shares
or the conversion of their shares into any other class of our stock. The rights, preferences and privileges of holders of common
stock are subject to, and may be adversely affected by, the rights of the holders of any series of preferred stock that we may
designate and issue in the future.
Public
Warrants
The
Public Warrants are exercisable at an exercise price of $40.00 per share, subject to certain adjustments. The Public Warrants
expire on February 21, 2022. Each Public Warrant will have a cashless exercise right in the event that shares of common stock
underlying such Warrants are not covered by an effective registration statement. As of December 31, 2019, we had 162,150 Public
Warrants outstanding.
Preferred
Stock
Under
our articles of incorporation, our board of directors has the authority, without further action by stockholders, to designate
one or more series of preferred stock and to fix the voting powers, designations, preferences, limitations, restrictions and relative
rights granted to or imposed upon the preferred stock, including dividend rights, conversion rights, voting rights, rights and
terms of redemption, liquidation preference and sinking fund terms, any or all of which may be preferential to or greater than
the rights of the common stock.
Our
board of directors may authorize the issuance of preferred stock with voting or conversion rights that could adversely affect
the voting power or other rights of the holders of the common stock. The issuance of preferred stock, while providing flexibility
in connection with possible acquisitions and other corporate purposes, could, among other things, have the effect of delaying,
deferring or preventing a change in our control and may adversely affect the market price of the common stock and the voting and
other rights of the holders of common stock.
In
connection with our underwritten public offering of equity securities on February 21, 2017, we created a series of Preferred Stock
called “Series A Preferred Stock.” None of such shares were issued in such offering. In our April 6, 2018 private
placement, we issued 1,000 shares of Series B Preferred Stock (“Series B Preferred”), which were convertible into
100,000 shares of common stock. All shares of our Series B Preferred have been converted and 50,000 shares of common stock issued
upon conversion of such shares are currently beneficially owned by an affiliate of a selling stockholder. In our June 26, 2018
public offering of equity securities, we issued 350 shares of Series C Preferred Stock which were initially convertible into 35,000
shares of common stock. Accordingly, as of the date of this Form 10-K, all shares of such preferred stock have been fully converted.
In connection with the private placements occurring on January 27, 2020, we created two new series of Preferred Stock: the Series
D Preferred Stock and the Series E Preferred Stock. As of the date hereof, 575 shares of Series D Preferred Stock and 333.33 shares
of Series E Preferred Stock are issued and outstanding.
Under
the Certificate of Designations for the Series D Preferred Stock, the Series D Preferred Stock has an initial stated value of
$1,000 per share (the “Stated Value”). Dividends accrue at a dividend rate of 9% per annum (subject to increase upon
the occurrence (and during the continuance) of certain triggering events described therein) will accrue and, on a monthly basis,
shall be payable in kind by the increase of the Stated Value of the Series D Preferred Shares by said amount. The holders of the
Series D Preferred Shares will have the right at any time to convert all or a portion of the Series D Preferred Shares (including,
without limitation, accrued and unpaid dividends and make-whole dividends through the third anniversary of the closing date) into
shares of the Company’s Common Stock at the conversion price then in effect, which initially is $10.00 (subject to adjustment
for stock splits, dividends, recapitalizations and similar events and full ratchet price protection). In addition, a holder may
at any time, alternatively, convert all, or any part, of its Series D Preferred Shares at an alternative conversion price, which
equals the lower of the applicable conversion price then in effect, and the greater of (x) $1.80 and (y) 85% of the average volume
weighted average price (“VWAP”) of the Common Stock for a five (5) trading day period prior to such conversion. Upon
the occurrence of certain triggering events, described in the Certificate of Designations, including, but not limited to payment
defaults, breaches of transaction documents, failure to maintain listing on the Nasdaq Capital Market, and other defaults set
forth therein, the Series D Preferred Shares would become subject to redemption, at the option of a holder, at a 125% premium
to the underlying value of the Series D Preferred Shares being redeemed.
The
Certificate of Designations contains a prohibition on the issuance of any shares of Common Stock upon conversion of the Series
D Preferred Shares in excess of the amount set forth in NASDAQ Listing Rule 5635(d) (20% or more of the outstanding shares of
common stock) until the Company obtains shareholder approval for issuance of shares of Common Stock in excess of such amount.
In the Institutional SPA, the Company has agreed to promptly obtain such shareholder approval and amend its article of incorporation
and/or effect a reverse split in order to have sufficient shares of Common Stock available to allow the holders of the Series
D Preferred Shares to convert in full the Series D Preferred Shares and exercise in full the Institutional Common Warrants.
Under
the Certificate of Designations for the Series E Preferred Stock, the Series E Preferred Shares have an initial stated value of
$1,500 per share (the “Stated Value”). Dividends at the initial rate of 9% per annum will accrue and, on a monthly
basis, shall be payable in kind by the increase of the Stated Value of the Series E Preferred Stock by said amount. The holders
of the Series E Preferred Shares have the right at any time to convert all or a portion of the Preferred Shares (including, without
limitation, accrued and unpaid dividends and make-whole dividends through the third anniversary of the closing date) into shares
of the Company’s Common Stock at an initial conversion rate determined by dividing the Conversion Amount by the Conversion
Price ($0.13 above the consolidated closing bid price for the trading day prior to the execution of the Securities Purchase Agreement,
dated January 27, 2020, between and the purchasers referenced therein). The Conversion Amount is the sum of the Stated Value of
the Series E Preferred Shares then being converted plus any other unpaid amounts payable with respect to the Series E Preferred
Shares being converted plus the “Make Whole Amount” (the amount of any dividends that, but for the conversion, would
have accrued at the dividend rate for the period through the third anniversary of the initial issuance date). The Conversion Rate
is also subject to adjustment for stock splits, dividends recapitalizations and similar events.
Transfer
Agent
The
transfer agent and registrar of our common stock is Issuer Direct Corporation. The address of our transfer agent and registrar
is 1981 Murray Holladay Road, Suite 100 Salt Lake City, Utah 84117, and its telephone number is (801) 272-9294.
Anti-Takeover
Effects of Certain Provisions of Our Charter Documents
Our
articles of incorporation and bylaws contain provisions that could delay or prevent changes in control or changes in our management
without the consent of our board of directors. These provisions include the following:
|
●
|
a classified board
of directors with three-year staggered terms, which may delay the ability of stockholders to change the membership of a majority
of our board of directors;
|
|
|
|
|
●
|
no cumulative voting
in the election of directors, which limits the ability of minority stockholders to elect director candidates;
|
|
|
|
|
●
|
the exclusive right
of our board of directors to elect a director to fill a vacancy created by the expansion of the board of directors or the
resignation, death or removal of a director, which prevents stockholders from being able to fill vacancies on our board of
directors;
|
|
|
|
|
●
|
the ability of our
board of directors to authorize the issuance of additional shares of preferred stock and to determine the terms of those shares,
including preferences and voting rights, without stockholder approval, which could adversely affect the rights of our common
stockholders or be used to deter a possible acquisition of our company;
|
|
●
|
the ability of our
board of directors to alter our bylaws without obtaining stockholder approval;
|
|
|
|
|
●
|
the required approval
of the holders of at least two-thirds of the shares entitled to vote at an election of directors to adopt, amend or repeal
our bylaws or repeal the provisions of our articles of incorporation and bylaws regarding the election and removal of directors;
|
|
|
|
|
●
|
a prohibition on
stockholder action by written consent, which forces stockholder action to be taken at an annual or special meeting of our
stockholders;
|
|
|
|
|
●
|
the requirement
that a special meeting of stockholders may be called only by the chairman of the board of directors, the chief executive officer,
the president or the board of directors, which may delay the ability of our stockholders to force consideration of a proposal
or to take action, including the removal of directors; and
|
|
|
|
|
●
|
advance notice procedures
that stockholders must comply with in order to nominate candidates to our board of directors or to propose matters to be acted
upon at a stockholders’ meeting, which may discourage or deter a potential acquirer from conducting a solicitation of
proxies to elect the acquirer’s own slate of directors or otherwise attempting to obtain control of us.
|
These
provisions could inhibit or prevent possible transactions that some stockholders may consider attractive.
NASDAQ
Capital Market
Our
Common Stock and Public Warrants are currently traded on the NASDAQ Capital Market under the symbols “SGLB” and “SGLBW”
respectively.
Nevada
Anti-Takeover Law and Charter and Bylaws Provisions
NRS
sections 78.378 to 78.3793 provide state regulation over the acquisition of controlling interest in certain Nevada corporations
unless the articles of incorporation or bylaws of the corporation provide that the provisions of these sections do not apply.
This statute currently does not apply to our company because in order to be applicable, we would need to have a specified number
of Nevada residents as shareholders, and we would have to do business in Nevada directly or through an affiliate.
PLAN
OF DISTRIBUTION
We
have engaged Dawson James Securities, Inc., or Dawson James, to act as our exclusive placement agent in connection with the offering
pursuant to the terms and conditions of a placement agency agreement. The placement agent is not purchasing or selling any securities
offered by this prospectus supplement, and is not required to arrange for the purchaser or sale of any specific number or dollar
amount of securities, but will use its reasonable best efforts to arrange for the sale of the securities offered by this prospectus
supplement. The placement agent may retain one or more sub-agents or selected dealers in connection with the offering.
We
have agreed to pay to the placement agent a placement agent fee equal to 8% of the aggregate gross proceeds to us from the sale
of the securities in the offering. In addition, we have agreed to reimburse the placement agent for diligence expenses, blue sky
and legal fees in the sum of $25,000. We have also agreed to pay to the lead institutional investor a non-accountable expense
reimbursement fee of $50,00 to cover such investor’s expenses, including legal fees, with respect to this offering.
Pursuant
to the placement agency agreement, the placement agent will be entitled to such fees with respect to any public or private offering
or other financing or capital-raising transaction of any kind (“Tail Financing”) to the extent that such financing
or capital is provided to the Company by investors that participated in this offering, if such Tail Financing is consummated at
any time within the 90-day period following the completion of this offering.
We have also agreed to
issue to the placement agent or its designees a five-year warrant to purchase 41,237 shares of our common stock at an exercise
price equal to $3.64 per share. The warrants will be exercisable at any time and from time to time, in whole or in part, during
the period commencing six months following the commencement date of this offering and ending five years from the commencement
date of this offering. The warrants provide for a cashless exercise provision and demand registration rights and customary anti-dilution
provisions (for stock dividends and splits and recapitalizations) consistent with FINRA Rule 5110. The warrants and the underlying
securities are deemed compensation by FINRA and are therefore subject to FINRA Rule 5110(g)(1). In accordance with FINRA Rule
5110(g)(1), neither the warrants nor any securities issued upon exercise of the warrants may be sold, transferred,
assigned, pledged, or hypothecated, or be the subject of any hedging, short sale, derivative, put, or call transaction that would
result in the effective economic disposition of such securities by any person for a period of 180 days immediately following the
date of commencement of sales of the offering pursuant to which the warrants are being issued, except the transfer of any
security: (i) by operation of law or by reason of reorganization of our company; (ii) to any FINRA member firm participating in
this offering and the officers or partners thereof, if all securities so transferred remain subject to the lock-up restriction
described above for the remainder of the time period; (iii) if the aggregate amount of our securities held by either a placement
agent or a related person do not exceed 1% of the securities being offered; (iv) that is beneficially owned on a pro-rata basis
by all equity owners of an investment fund, provided that no participating member manages or otherwise directs investments by
the fund, and participating members in the aggregate do not own more than 10% of the equity in the fund; or (v) the exercise or
conversion of any security, if all securities received remain subject to the lock-up restriction set forth above for the remainder
of the time period.
The
placement agency agreement provides that we will indemnify the placement agent against specified liabilities, including liabilities
under the Securities Act. The placement agent will be deemed to be an underwriter within the meaning of Section 2(a)(11)
of the Securities Act, and any commissions received by it and any profit realized on the resale of the securities sold by it while
acting as principal will be deemed to be underwriting discounts or commissions under the Securities Act. As an underwriter,
the placement agent would be required to comply with the Securities Act and the Exchange Act, including without limitation, Rule
10b-5 and Regulation M under the Exchange Act. These rules and regulations may limit the timing of purchases and sales of shares
of common stock by the placement agent acting as principal. Under these rules and regulations, the placement agent:
|
●
|
may not engage in
any stabilization activity in connection with our securities; and
|
|
|
|
|
●
|
may not bid for
or purchase any of our securities or attempt to induce any person to purchase any of our securities, other than as permitted
under the Exchange Act, until it has completed its participation in the distribution.
|
The
placement agent or its affiliates have in the past and may in the future engage in transactions with, and may perform, from
time to time, investment banking and advisory services for us in the ordinary course of their business and for which they
would receive customary fees and expenses. In addition, in the ordinary course of their business activities, the placement
agent and its affiliates may make or hold a broad array of investments and actively trade debt and equity securities (or
related derivative securities) and financial instruments (including bank loans) for its own account and for the accounts of
its customers. Such investments and securities activities may involve securities and/or instruments of ours or our
affiliates. Without limiting the generality of the foregoing, the placement agent for this offering also acted as the
placement agent for a public offering we completed in June 2018 and for a private placement we completed in April 2018
pursuant to which we issued Dawson as placement agent a compensation Unit Purchase Option to acquire up to 191,200 Units, at
an exercise price of $12.50 per Unit, consisting of 191,200 shares of our common stock and warrants to purchase up to 57,360
shares of our common stock at an exercise price of $10.08, and compensation warrants to purchase 140,000 shares of our common
stock at an exercise price of $14.70 per share, respectively. The placement agent acted as placement agent for a private
placement of shares our Series D Preferred Stock and Series D Preferred Stock in January 2020 to which we issued to Dawson a
warrant to purchase up to 17,004 shares of our common stock at an exercise price of $11.30 per share.
The
foregoing description of the placement agency agreement is only a summary, does not purport to be complete and is qualified in
its entirety by reference to the placement agency agreement and placement agent unit purchase option, copies of which are included
as exhibits to our Current Report on Form 8-K filed with the SEC in connection with this offering and are incorporated herein
by reference.
LEGAL
MATTERS
TroyGould
PC, Los Angeles, California, has issued an opinion about certain legal matters with respect to the securities offered by this
prospectus supplement. Certain attorneys employed by TroyGould PC beneficially own shares of our common stock constituting in
the aggregate less than 1% of our outstanding shares of common stock. Schiff Hardin LLP, Washington DC, acted as counsel
for the Placement Agent in connection with certain legal matters related to this offering.
EXPERTS
The
financial statements of Sigma Labs, Inc. as of December 31, 2019 and as of December 31, 2018, and for the years then ended, which
are incorporated into this prospectus supplement by reference to our Annual Report on Form 10-K for the year ended December 31,
2019, have been so incorporated in reliance on the report of Haynie & Company, an independent registered public accounting
firm, given on the authority of said firm as experts in auditing and accounting.
WHERE
YOU CAN FIND MORE INFORMATION
We
are subject to the information and periodic reporting requirements of the Securities Exchange Act of 1934, as amended (the “Exchange
Act”) and, in accordance with that act, file periodic reports, proxy statements and other documents with the SEC. The SEC
also maintains an Internet site that contains all reports, proxy statements and other documents that we file electronically with
the SEC. The address of that website is www.sec.gov. The reports, proxy statements and other documents that we file with
the SEC are also available, free of charge, as soon as reasonably practicable after they
are filed with the SEC, at our website at www.sigmalabsinc.com. The content contained in, or that can be accessed through, our
website is not a part of this prospectus supplement.
This
prospectus supplement and the accompanying prospectus are part of a registration statement on Form S-3 that we have filed with
the SEC under the Securities Act for the securities offered under this prospectus supplement (the “Form S-3 Registration
Statement”). The Form S-3 Registration Statement, including the exhibits to the Form S-3 Registration Statement, contains
additional information about us and the securities offered by this prospectus. The rules and regulations of the SEC allow us to
omit from this prospectus supplement and the accompanying prospectus certain information that is included in the Form S-3 Registration
Statement. For further information about us and our securities, you should review the Form S-3 Registration Statement and the
exhibits filed with the Form S-3 Registration Statement. You may access the Form S-3 Registration
Statement and its exhibits at the SEC’s Internet website.
INCORPORATION
OF CERTAIN INFORMATION BY REFERENCE
The
SEC allows us to incorporate by reference into this prospectus supplement and the accompanying prospectus the information we file
with it, which means that we can disclose important information to you by referring you to the documents containing that information.
The information incorporated by reference is considered to be part of this prospectus supplement and the accompanying prospectus,
and information that we later file with the SEC will automatically update and, where applicable, modify or supersede that information.
We
incorporate by reference into this prospectus supplement and the accompanying prospectus the following documents that we have
filed, or will file, with the SEC:
|
●
|
Our Annual Report
on Form 10-K for the fiscal year ended December 31, 2019, filed with the SEC on March 24, 2020;
|
|
|
|
|
●
|
Our
Current Reports on Form 8-K filed with the SEC on January 13, 2020, January 21, 2020,
January 27, 2020, January 30, 2020, February 4, 2020, February 25, 2020, February
28, 2020, March 24, 2020, March 25, 2020, April 2, 2020 and April 3, 2020,
|
|
|
|
|
●
|
Our Definitive Proxy
Statement on Schedule 14A for a special meeting of stockholders filed with the SEC on March 2, 2020;
|
|
|
|
|
●
|
The description
of our common stock contained in our registration statement on Form 8-A, filed with the SEC on February 14, 2017, and any
amendment or report subsequently filed for the purpose of updating such description; and
|
|
|
|
|
●
|
Each document that
we file with the SEC under Section 13(a), 13(c), 14 or 15(d) of the Exchange Act after the date on which we filed the Form
S-3 Registration Statement and before the termination of this offering, with information in each such filing to be deemed
to be incorporated by reference as of the date we make the filing with the SEC.
|
You
may request a copy of any of these filings from us at no cost by writing or calling John Rice, our President and Chief Executive
Officer, at the following address or telephone number: Sigma Labs, Inc.; 3900 Paseo del Sol, Santa Fe, New Mexico 87507; (505)
438-2576.
Notwithstanding
the foregoing, no portion of any document that is “furnished” but not “filed” in accordance with SEC rules
under Exchange Act shall be deemed to be incorporated by reference into this prospectus supplement or the accompanying prospectus.
Any statement contained in this prospectus supplement, the accompanying prospectus or in a document incorporated by reference
will be deemed to be modified or superseded for purposes of this prospectus supplement and the accompanying prospectus to the
extent that a statement contained in this prospectus supplement or in any other subsequently filed document that is incorporated
by reference into this prospectus supplement and the accompanying prospectus modifies or supersedes the statement. Any statement
so modified or superseded will not be deemed, except as so modified or superseded, to constitute a part of this prospectus supplement
or the accompanying prospectus.
PROSPECTUS
$30,000,000
SIGMA
LABS, INC.
Common
Stock
Preferred
Stock
Debt
Securities
Warrants
Units
We,
directly or through underwriters, dealers or agents designated by us from time to time, may offer, issue and sell, together or
separately, up to $30,000,000 in the aggregate of:
|
●
|
shares of our common
stock, par value $0.001 per share;
|
|
|
|
|
●
|
shares of our preferred
stock, par value $0.001 per share;
|
|
|
|
|
●
|
debt securities;
|
|
|
|
|
●
|
warrants to purchase
shares of our common stock, shares of our preferred stock or our debt securities; and
|
|
|
|
|
●
|
units consisting
of two or more of the securities described above.
|
The
common stock, the preferred stock, the debt securities, the warrants and the units collectively are referred to in this prospectus
as the “securities.”
We
will provide the specific terms of each offering of securities, including the price and the type and amount of securities to be
offered and sold, in a supplement to this prospectus. You should read this prospectus and the prospectus supplement carefully
before you invest.
We
may offer and sell these securities directly to purchasers or to or through one or more underwriters, dealers and agents, and
on a continuous or delayed basis. If we sell securities to or through underwriters, dealers or agents, we will include their names
and the fees, commissions and discounts that they will receive, as well as the net proceeds to us, in the prospectus supplement.
This prospectus may not be used to sell our securities unless it is accompanied by the prospectus supplement. The delivery of
this prospectus together with a prospectus supplement relating to the offered securities shall not constitute an offer of any
other securities covered by this prospectus.
Neither
the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or
passed upon the adequacy or accuracy of this prospectus. Any representation to the contrary is a criminal offense.
The
date of this prospectus is June 14, 2018.
TABLE
OF CONTENTS
ABOUT
THIS PROSPECTUS
This
prospectus is a part of a registration statement on Form S-3 that we filed with the Securities and Exchange Commission (the “SEC”)
utilizing a “shelf” registration process. Under the shelf registration process, we may sell any combination of the
securities described in this prospectus in one or more transactions up to a total dollar amount of $30,000,000.
The
rules and regulations of the SEC allow us to omit from this prospectus certain information that is included in the registration
statement. For further information about us and our securities, you should review the registration statement and the exhibits
filed with the registration statement. In addition, the SEC allows us to incorporate by reference into this prospectus information
in the reports and other documents that we file with the SEC, which means that we can disclose important information to you by
referring you to those reports and other documents. The information incorporated by reference is considered to be part of this
prospectus, and information that we later file with the SEC will automatically update and, where applicable, modify or supersede
that information. You may read the registration statement (including its exhibits) and the reports and other documents that we
file with the SEC at the SEC’s website, www.sec.gov, or at the SEC’s Public Reference Room described below under the
heading “Where You Can Find More Information.”
This
prospectus provides you with a general description of the securities we may offer. Each time we offer securities under this shelf
registration, we will provide a prospectus supplement that will contain specific information about the terms of that offering.
The prospectus supplement may also add, update or change information contained in this prospectus. You should read both this prospectus
and any prospectus supplement together with the additional information described under the heading “Incorporation of Certain
Information by Reference.” To the extent that any information in the prospectus supplement is inconsistent with the information
in this prospectus, the information in the prospectus supplement will modify or supersede this prospectus.
This
prospectus and the related prospectus supplement do not constitute an offer to sell or the solicitation of an offer to buy any
securities other than the registered securities to which they relate, nor do this prospectus and the related prospectus supplement
constitute an offer to sell or the solicitation of an offer to buy securities in any jurisdiction to any person to whom it is
unlawful to make such offer or solicitation in such jurisdiction.
You
should not assume that the information contained in this prospectus and the related prospectus supplement is accurate as of any
date subsequent to the date set forth on the front of the document or that any information we have incorporated by reference is
correct as of any date subsequent to the date of the document incorporated by reference, even though this prospectus and any related
prospectus supplement is delivered or securities are sold on a later date. Our business, financial condition, results of operations
and prospects may have changed since those dates.
You
should rely only on the information contained in this prospectus, in the related prospectus supplement and in any documents incorporated
by reference into this prospectus. We have not authorized any salesperson, dealer or other person to provide you with information
different from that contained in this prospectus, in the related prospectus supplement or in any documents incorporated by reference
into this prospectus, and you are not entitled to rely upon any such different information.
SIGMA
LABS
Sigma
is a software company that has developed In-Process-Quality-Assurance (“IPQA”) software known as PrintRite3D®.
This technology is also sometimes referred to as Real-Time-Computer-Aided Inspection (“CAI”). Sigma believes that
its PrintRite3D® solves the major quality assurance problem that has prevented large-scale metal part production using 3D
printers for high yield and cost efficient production runs.
Sigma’s
business is currently focused on the continued development and commercialization of Sigma’s PrintRite3D® suite of software
applications. We are specifically focusing on the 3D printing (“3DP”) and additive manufacturing (“AM”)
industries and further developing our contract additive manufacturing business for metal 3DP to be a customer prototype center
available for cutting edge 3D challenges and a concurrent means of demonstrating and proving the merit of PrintRite3D® for
customers’ parts or application. Our strategy is to continue to leverage our advanced manufacturing knowledge, experience
and capabilities through the following means:
|
●
|
Identify, develop
and commercialize our quality assurance software applications for advanced manufacturing technologies. The applications are
designed to assure part quality in real time, and improve process control practices for a variety of industries;
|
|
|
|
|
●
|
Provide materials
and process engineering consulting services with our PrintRite3D® CAI quality assurance software applications for advanced
manufacturing to customers that need:
|
|
●
|
to learn and characterize
the individual performance parameters of each machine intended to produce 3D metal parts;
|
|
|
|
|
●
|
to determine and
characterize the traits, signatures, and in-process behaviors of the materials designated for a given part’s production;
|
|
|
|
|
●
|
to improve manufacturing
quality yields by utilizing IPQA;
|
|
|
|
|
●
|
to improve, perhaps
for the first time, documentable third party part-by-part quality certification.
|
|
●
|
Build and run a
prototype and small lot contract manufacturing and demonstration division for metal 3DP beginning with our EOSM290 state-of-the-art
metal printer.
|
We
are presently engaged with and focused primarily on the following industry sectors:
|
●
|
Aerospace and defense manufacturing;
|
|
|
|
|
●
|
Energy and power generation;
|
|
|
|
|
●
|
Bio-medical manufacturing.
|
We
generate revenues through PrintRite3D® hardware and CAI software licensing of our PrintRite3D® technology to customers
that seek to improve their manufacturing production processes, and through ongoing annual software upgrades and maintenance fees.
Additionally, we generate revenues from our contract manufacturing activities in metal AM. By running a small-scale contract AM
services operation, we are able to understand the current needs of our customers and where they are going with their next-generation
product development efforts. Contract AM further allows us a means for material on-going partial self-funding of our IPQA®-enabled
R&D and product development activities for CAI software. We provide our AM contract manufacturing services to customers in
the form of Quality as a Service. Starting with our PrintRite3D® cloud-based SaaS model, customers will contract with us for
CAE, CAM and CAI services to generate and establish a Digital Quality Record (DQR) for AM built parts. Each DQR is cloud-based
and allows for archiving and storage of quality data, access to our big data ANALYTICS™ software App for continuous quality
monitoring and improvement, and automatic industry benchmarking while maintaining firewalls between company-specific data.
We
possess the resident expertise to provide manufacturing materials and process engineering services and support to companies using
our PrintRite3D® software Apps for metal AM. Accordingly, in addition to our primary business focus, we intend to generate
revenues by providing such engineering services and support to businesses that license our PrintRite3D® software Apps. Our
President and Chief Technology Officer has worked at or with the Edison Welding Institute and United States Department of Energy
(“DOE”) national laboratories (including the Knolls Atomic Power Laboratory, Bettis Atomic Power Laboratory, Los Alamos
National Laboratory and Sandia National Laboratory) over the past 34 years. Due to his work with the DOE, our President and Chief
Technology Officer has developed extensive relationships with the DOE and its network of national laboratories. Accordingly, we
expect to leverage these relationships in connection with licensing and developing technologies created at such national laboratories
for commercialization in the private sector.
Our
principal executive offices are located at 3900 Paseo del Sol, Santa Fe, New Mexico 87507, and our telephone number is (505) 438-2576.
Our website address is www.sigmalabsinc.com, although the information on our website is not deemed to be part of this prospectus.
RISK
FACTORS
Investing
in our securities involves a high degree of risk. Before you decide whether to purchase any of our securities, in addition to
the other information in this prospectus and the related prospectus supplement, you should carefully consider the risks described
under the heading “Risk Factors” in our most recent Annual Report on Form 10-K and subsequently filed Quarterly Reports
on Form 10-Q, which are incorporated by reference into this prospectus, as the same may be updated from time to time by our future
filings with the SEC. You should also carefully consider any additional risks that are described in the prospectus supplement
related to the offering of our securities. If one or more of these risks materializes, our business, financial condition and results
of operations may be adversely affected. In that event, the value of our securities could decline.
CAUTIONARY
NOTE REGARDING FORWARD-LOOKING STATEMENTS
This
prospectus and the documents incorporated herein by reference contain forward-looking statements, and we anticipate that the related
prospectus supplement will contain forward-looking statements. These statements relate to future events or to our future financial
performance and involve known and unknown risks, uncertainties and other factors that may cause our actual results to be materially
different from any future results expressed or implied by the forward-looking statements. In some cases, you can identify forward-looking
statements by the use of words such as “believe,” “anticipate,” “intend,” “plan,”
“estimate,” “may,” “could,” “anticipate,” “predict,” or “expect”
and similar expressions. You should not place undue reliance on forward-looking statements since they involve known and unknown
risks, uncertainties and other factors that are, in many cases, beyond our control. Forward-looking statements are not guarantees
of future performance. Actual events or results may differ materially from those discussed in the forward-looking statements as
a result of various factors. Except as required by applicable law, we do not undertake any obligation to publicly update any forward-looking
statements, whether as a result of new information, future developments or otherwise.
We
will discuss certain of these risks and uncertainties in greater detail in any prospectus supplement under the heading “Risk
Factors.” Additional cautionary statements or discussions of risks and uncertainties that could affect our results or the
achievement of the expectations described in forward-looking statements may also be contained in the documents we incorporate
by reference into this prospectus, including our most recent Annual Report on Form 10-K filed with the SEC and our Quarterly Reports
on Form 10-Q filed subsequently with the SEC.
USE
OF PROCEEDS
Unless
we state otherwise in the applicable prospectus supplement, we intend to use the net proceeds from the sale of securities described
in this prospectus for general corporate purposes which may include, among other things, acquiring other businesses (although
we currently have no agreement to acquire any business), reducing indebtedness, repurchasing our common stock and making capital
expenditures, as well as for working capital. Until we use the net proceeds for these purposes, we intend to invest the net proceeds
in investment-grade, interest-bearing securities. We have not determined the amounts we plan to spend on any of these areas or
the timing of these expenditures. As a result, our management will have broad discretion regarding the application of the net
proceeds from the sale of securities described in this prospectus.
FINANCIAL
RATIOS
If
required in connection with any offer of our debt securities or shares of our preferred stock, we will provide a ratio of earnings
to fixed charges or of combined fixed charges and preference dividends to earnings in the related prospectus supplement.
THE
SECURITIES THAT WE MAY OFFER
We,
directly or through underwriters, dealers or agents designated by us from time to time, may offer, issue and sell, together or
separately, up to $30,000,000 in the aggregate of:
|
●
|
shares of our common
stock, par value $0.001 per share;
|
|
|
|
|
●
|
shares of our preferred
stock, par value $0.001 per share;
|
|
|
|
|
●
|
debt securities;
|
|
|
|
|
●
|
warrants to purchase
shares of our common stock, shares of our preferred stock or our debt securities; and
|
|
|
|
|
●
|
units consisting
of two or more of the securities described above.
|
The
common stock, the preferred stock, the debt securities, the warrants and the units collectively are referred to in this prospectus
as the “securities.”
We
have summarized below the material terms of the various types of securities that we may offer. We will describe in the applicable
prospectus supplement the detailed terms of the securities offered by that supplement. If indicated in the prospectus supplement,
the terms of the offered securities may differ from the terms summarized below.
This
prospectus may not be used to sell our securities unless it is accompanied by the applicable prospectus supplement.
DESCRIPTION
OF COMMON STOCK
We
are presently authorized to issue 15,000,000 shares of $0.001 par value common stock. As of May 30, 2018, 5,703,929 shares of
our common stock were outstanding and there were outstanding warrants to purchase 2,535,500 shares of our common stock. The following
summary of our common stock is qualified by reference to the provisions of our articles of incorporation and bylaws, which are
filed as exhibits to the Form S-3 registration statement of which this prospectus is a part.
We
have one class of common stock. Holders of our common stock are entitled to one vote per share on all matters to be voted upon
by stockholders and do not have cumulative voting rights in the election of directors. Holders of shares of common stock are entitled
to receive on a pro rata basis such dividends, if any, as may be declared from time to time by our board of directors in its discretion
from funds legally available for that use, subject to any preferential dividend rights of outstanding preferred stock. They are
also entitled to share on a pro rata basis in any distribution to our common stockholders upon our liquidation, dissolution or
winding up, subject to the prior rights of any outstanding preferred stock. Common stockholders do not have preemptive rights
to subscribe to any additional stock issuances by us, and they do not have the right to require the redemption of their shares
or the conversion of their shares into any other class of our stock. The rights, preferences and privileges of holders of common
stock are subject to, and may be adversely affected by, the rights of the holders of outstanding preferred stock and any series
of preferred stock that we may designate and issue in the future.
The
following provisions of our articles of incorporation and bylaws could have the effect of delaying or discouraging another party
from acquiring control of us and could encourage persons seeking to acquire control of us to first negotiate with our board of
directors:
|
●
|
a classified board
of directors with three-year staggered terms, which may delay the ability of stockholders to change the membership of a majority
of our board of directors;
|
|
●
|
no cumulative voting
in the election of directors, which limits the ability of minority stockholders to elect director candidates;
|
|
●
|
the exclusive right
of our board of directors to elect a director to fill a vacancy created by the expansion of the board of directors or the
resignation, death or removal of a director, which prevents stockholders from being able to fill vacancies on our board of
directors;
|
|
|
|
|
●
|
the ability of our
board of directors to authorize the issuance of additional shares of preferred stock and to determine the terms of those shares,
including preferences and voting rights, without stockholder approval, which could adversely affect the rights of our common
stockholders or be used to deter a possible acquisition of our company;
|
|
|
|
|
●
|
the ability of our
board of directors to alter our bylaws without obtaining stockholder approval;
|
|
|
|
|
●
|
the required approval
of the holders of at least two-thirds of the shares entitled to vote at an election of directors to adopt, amend or repeal
our bylaws or repeal the provisions of our articles of incorporation and bylaws regarding the election and removal of directors;
|
|
|
|
|
●
|
a prohibition on
stockholder action by written consent, which forces stockholder action to be taken at an annual or special meeting of our
stockholders;
|
|
|
|
|
●
|
the requirement
that a special meeting of stockholders may be called only by the chairman of the board of directors, the chief executive officer,
the president or the board of directors, which may delay the ability of our stockholders to force consideration of a proposal
or to take action, including the removal of directors; and
|
|
|
|
|
●
|
advance notice procedures
that stockholders must comply with in order to nominate candidates to our board of directors or to propose matters to be acted
upon at a stockholders’ meeting, which may discourage or deter a potential acquirer from conducting a solicitation of
proxies to elect the acquirer’s own slate of directors or otherwise attempting to obtain control of us.
|
The
transfer agent and registrar of our common stock is Interwest Transfer Company, Inc. The address of our transfer agent and registrar
is 1981 Murray Holladay Road, Suite 100 Salt Lake City, Utah 84117, and its telephone number is (801) 272-9294.
Our
common stock is traded on The NASDAQ Capital Market under the symbol “SGLB.”
DESCRIPTION
OF PREFERRED STOCK
We
are presently authorized to issue 10,000,000 shares of $0.001 par value preferred stock, of which 1,610,000 shares have been designated
“Series A Preferred Stock” and 1,000 shares have been designated “Series B Convertible Preferred Stock,”
or “Series B Preferred Stock.” As of May 30, 2018, we had 500 shares of Series B Preferred Stock issued and outstanding,
which are convertible into 500,000 shares of common stock.
Under
our articles of incorporation, our board of directors has the authority, without further action by stockholders, to designate
one or more series of preferred stock and to fix the voting powers, designations, preferences, limitations, restrictions and relative
rights granted to or imposed upon the preferred stock, including dividend rights, conversion rights, voting rights, rights and
terms of redemption, liquidation preference and sinking fund terms, any or all of which may be preferential to or greater than
the rights of the common stock.
Our
board of directors may authorize the issuance of preferred stock with voting or conversion rights that could adversely affect
the voting power or other rights of the holders of the common stock. The issuance of preferred stock, while providing flexibility
in connection with possible acquisitions and other corporate purposes, could, among other things, have the effect of delaying,
deferring or preventing a change in our control and may adversely affect the market price of the common stock and the voting and
other rights of the holders of common stock.
In
connection with our underwritten public offering of equity securities on February 21, 2017, we created a series of Preferred Stock
called “Series A Preferred Stock.” None of such shares were issued in such offering. In our April 6, 2018 private
placement, we issued 1,000 shares of Series B Preferred Stock (“Series B Preferred”), which were initially convertible
into 1,000,000 shares of common stock. The shares of Series B Preferred bear cumulative dividends at a rate of 10% per annum of
the stated value, payable in cash upon conversion of the Series B Preferred (with respect to the shares being converted). Such
dividends will cease to accrue upon the second annual anniversary of the date of issuance of the Series B Preferred. The holders
of Series B Preferred also are entitled to participate in dividends (on an as-converted basis) as and when declared and paid to
the holders of common stock.
The
initial conversion price of the Series B Preferred is $1.00 per share of common stock, subject to standard adjustments for certain
transactions affecting the Company’s securities (such as stock dividends, stock splits, and the like). Shares of Series
B Preferred are convertible into common stock at the option of the holder from time to time, subject to a beneficial ownership
limitation of 4.99% (or 9.99% at the option of the holder).
The
Series B Preferred generally has no voting rights. However, for so long as any shares of Series B Preferred are outstanding, the
affirmative vote of the holders of a majority of the then outstanding shares of the Series B Preferred is required to: (a) alter
or change adversely the powers, preferences or rights given to the Series B Preferred or alter or amend the Certificate of Designation,
(b) amend the Company’s articles of incorporation or other charter documents in any manner that adversely affects any rights
of the holders of Series B Preferred, (c) increase the number of authorized shares of Series B Preferred, or (d) enter into any
agreement with respect to any of the foregoing.
Upon
any liquidation, dissolution or winding-up of the Company, whether voluntary or involuntary, that is not a Fundamental Transaction
(as defined in the Certificate of Designation), the holders of Series B Preferred are entitled to receive out of the assets the
Company the same amount they would have received on an as-converted basis, disregarding any conversion limitations. Such amounts
are to be paid on a pari passu basis with all holders of common stock.
We
will describe in a prospectus supplement relating to any series of preferred stock being offered the following terms:
|
●
|
the distinguishing
designation of the series of preferred stock;
|
|
|
|
|
●
|
the number of shares
of the series of preferred stock offered, the liquidation preference per share and the offering price of the series;
|
|
|
|
|
●
|
the dividend rate(s),
period(s) or payment date(s) or method(s) of calculation applicable to the series of preferred stock;
|
|
|
|
|
●
|
whether dividends
are cumulative or non-cumulative and, if cumulative, the date from which dividends on the series of preferred stock will accumulate;
|
|
|
|
|
●
|
the procedures for
any auction and remarketing, if any, for the series of preferred stock;
|
|
|
|
|
●
|
the provisions for
a sinking fund, if any, for the series of preferred stock;
|
|
|
|
|
●
|
the provision for
redemption, if applicable, of the series of preferred stock;
|
|
|
|
|
●
|
any listing of the
series of preferred stock on any securities exchange;
|
|
●
|
the terms and conditions,
if applicable, upon which the series of preferred stock will be convertible into common stock, including the conversion price
or manner of calculation and conversion period;
|
|
|
|
|
●
|
voting rights, if
any, of the series of preferred stock;
|
|
|
|
|
●
|
a discussion of
any material or special U.S. federal income tax considerations applicable to the series of preferred stock;
|
|
●
|
the relative ranking
and preferences of the series of preferred stock as to dividend rights and rights upon the liquidation, dissolution or winding
up of our affairs;
|
|
|
|
|
●
|
any limitations
on issuance of any series of preferred stock ranking senior to or on a parity with the series of preferred stock being offered
as to dividend rights and rights upon liquidation, dissolution or winding up of our affairs; and
|
|
|
|
|
●
|
any other specific
terms, preferences, rights, limitations or restrictions of the series of preferred stock.
|
Unless
we specify otherwise in the applicable prospectus supplement, the preferred stock will rank, relating to dividends and upon our
liquidation, dissolution or winding up:
|
●
|
senior to all classes or series of our common
stock and to all of our equity securities ranking junior to the preferred stock;
|
|
|
|
|
●
|
on a parity with all of our equity securities
the terms of which specifically provide that the equity securities rank on a parity with the preferred stock; and
|
|
|
|
|
●
|
junior to all of our equity securities the terms
of which specifically provide that the equity securities rank senior to the preferred stock.
|
Stock
Options
As
of March 31, 2018, options to purchase an aggregate of 493,626 shares of our common stock at a weighted average exercise price
of $3.27 per share were outstanding.
DESCRIPTION
OF DEBT SECURITIES
The
following is a summary of the general terms of the debt securities that we may offer. We will file a prospectus supplement that
may contain additional terms when we issue debt securities. The terms presented here, together with the terms in a related prospectus
supplement, will be a description of the material terms of the debt securities. You should also read the indenture under which
the debt securities are to be issued. We have filed a form of indenture governing different types of debt securities with the
SEC as an exhibit to the registration statement of which this prospectus is a part.
We
may issue, from time to time, debt securities, in one or more series. The debt securities we offer will be issued under an indenture
between us and the trustee named in the indenture. The debt securities that we may issue include senior debt securities, subordinated
debt securities, convertible debt securities and exchangeable debt securities.
The
following is a summary of the material provisions of the indenture filed as an exhibit to the registration statement of which
this prospectus is a part. For each series of debt securities, the applicable prospectus supplement for the series may change
and supplement the summary below.
General
Terms of the Indenture
The
indenture provides that we may issue debt securities up to the principal amount that we may authorize, and they may be in any
currency or currency unit that we may designate. Except for the limitations on consolidation, merger and sale of all or substantially
all of our assets contained in the indenture, the terms of the indenture do not contain any covenants or other provisions designed
to give holders of any debt securities protection against changes in our operations, financial condition or transactions involving
us. For each series of debt securities, any restrictive covenants for those debt securities will be described in the applicable
prospectus supplement for those debt securities.
We
may issue the debt securities issued under the indenture as “discount securities,” which means they may be sold at
a discount below their stated principal amount. These debt securities, as well as other debt securities that are not issued at
a discount, may, for United States federal income tax purposes, be treated as if they were issued with “original issue discount”
because of interest payment and other characteristics. Special U.S. federal income tax considerations applicable to debt securities
issued with original issue discount will be described in more detail in any applicable prospectus supplement.
You
should refer to the prospectus supplement relating to a particular series of debt securities for a description of the following
terms of the debt securities offered by that prospectus supplement and by this prospectus:
|
●
|
the title and authorized
denominations of those debt securities;
|
|
|
|
|
●
|
any limit on the
aggregate principal amount of that series of debt securities;
|
|
|
|
|
●
|
the date or dates
on which principal and premium, if any, of the debt securities of that series is payable;
|
|
|
|
|
●
|
interest rates,
and the dates from which interest, if any, on the debt securities of that series will accrue, and the dates when interest
is payable;
|
|
|
|
|
●
|
the right, if any,
to extend the interest payment periods and the duration of the extensions;
|
|
|
|
|
●
|
if the amount of
payments of principal or interest is to be determined by reference to an index or formula, or based on a coin or currency
other than that in which the debt securities are stated to be payable, the manner in which these amounts are determined and
the calculation agent, if any, with respect thereto;
|
|
|
|
|
●
|
the place or places
where and the manner in which principal of, premium, if any, and interest, if any, on the debt securities of that series will
be payable and the place or places where those debt securities may be presented for transfer and, if applicable, conversion
or exchange;
|
|
|
|
|
●
|
the period or periods
within which, the price or prices at which, the currency or currencies in which, and other terms and conditions upon which
those debt securities may be redeemed, in whole or in part, at our option or the option of a holder of those securities, if
we or a holder is to have that option;
|
|
|
|
|
●
|
our obligation or
right, if any, to redeem, repay or purchase those debt securities pursuant to any sinking fund or analogous provision or at
the option of a holder of those securities, and the terms and conditions upon which the debt securities will be redeemed,
repaid or purchased, in whole or in part, pursuant to that obligation;
|
|
|
|
|
●
|
the terms, if any,
on which the debt securities of that series will be subordinate in right and priority of payment to our other debt;
|
|
|
|
|
●
|
the denominations
in which the debt securities will be issuable;
|
|
|
|
|
●
|
if other than the
entire principal amount of the debt securities when issued, the portion of the principal amount payable upon acceleration
of maturity as a result of a default on our obligations;
|
|
|
|
|
●
|
whether the debt
securities will be issued in fully registered form without coupons or in a form registered as to principal only with coupons
or in bearer form with coupons;
|
|
|
|
|
●
|
whether any securities
of that series are to be issued in whole or in part in the form of one or more global securities and the depositary for those
global securities;
|
|
|
|
|
●
|
if other than United
States dollars, the currency or currencies in which payment of principal of or any premium or interest on those debt securities
will be payable;
|
|
●
|
if the principal
of or any premium or interest on the debt securities of that series is to be payable, or is to be payable at our election
or the election of a holder of those securities, in securities or other property, the type and amount of those securities
or other property, or the manner of determining that amount, and the period or periods within which, and the terms and conditions
upon which, any such election may be made;
|
|
|
|
|
●
|
the events of default
and covenants relating to the debt securities that are in addition to, or modify or delete, those described in this prospectus;
|
|
|
|
|
●
|
conversion or exchange
provisions, if any, including conversion or exchange prices or rates and adjustments thereto;
|
|
|
|
|
●
|
whether and upon
what terms the debt securities may be defeased, if different from the provisions set forth in the indenture;
|
|
|
|
|
●
|
the nature and terms
of any security for any secured debt securities;
|
|
|
|
|
●
|
the terms applicable
to any debt securities issued at a discount from their stated principal amount; and
|
|
|
|
|
●
|
any other material
terms of the debt securities.
|
The
applicable prospectus supplement will present material United States federal income tax considerations for holders of any debt
securities and the securities exchange or quotation system on which any debt securities are to be listed or quoted.
Conversion
or Exchange Rights
Debt
securities may be convertible into or exchangeable for shares of our equity securities or other securities. The terms and conditions
of conversion or exchange will be stated in the applicable prospectus supplement. The terms will include, among others, the following:
|
●
|
the conversion or exchange price;
|
|
|
|
|
●
|
the conversion or exchange period;
|
|
|
|
|
●
|
provisions regarding our ability or the ability
of any holder to convert or exchange the debt securities;
|
|
|
|
|
●
|
events requiring adjustment to the conversion
or exchange price; and
|
|
|
|
|
●
|
provisions affecting conversion or exchange
in the event of our redemption of the debt securities.
|
Consolidation,
Merger or Sale
We
cannot consolidate or merge with or into, or transfer or lease all or substantially all of our assets to, any person, unless the
successor corporation or person to which our assets are transferred or leased is organized under the laws of the United States,
any state of the United States or the District of Columbia and it expressly assumes our obligations under the debt securities
and the indenture. In addition, we cannot complete such a transaction unless immediately after completing the transaction, no
event of default under the indenture, and no event that, after notice or lapse of time or both, would become an event of default
under the indenture, has occurred and is continuing. When the person to whom our assets are transferred or leased has assumed
our obligations under the debt securities and the indenture, we will be discharged from all our obligations under the debt securities
and the indenture except in limited circumstances.
This
covenant would not apply to any recapitalization transaction, a change of control affecting us or a highly leveraged transaction,
unless the transaction or change of control were structured to include a merger or consolidation or transfer or lease of all or
substantially all of our assets.
Events
of Default
The
indenture provides that the following will be “events of default” with respect to any series of debt securities:
|
●
|
failure to pay interest
for thirty days after the date payment is due and payable;
|
|
|
|
|
●
|
failure to pay principal
or premium, if any, on any debt security when due, either at maturity, upon any redemption, by declaration or otherwise and,
in the case of technical or administrative difficulties, only if such default persists for a period of more than three business
days;
|
|
|
|
|
●
|
failure to make
sinking fund payments when due and continuance of such default for a period of 30 days;
|
|
|
|
|
●
|
failure to perform
other covenants for 60 days after notice that performance was required;
|
|
|
|
|
●
|
events in bankruptcy,
insolvency or reorganization relating to us; or
|
|
|
|
|
●
|
any other event
of default provided in the applicable officer’s certificate, resolution of our board of directors or the supplemental
indenture under which we issue a series of debt securities.
|
An
event of default for a particular series of debt securities does not necessarily constitute an event of default for any other
series of debt securities issued under the indenture. For each series of debt securities, any modifications to the above events
of default will be described in the applicable prospectus supplement for those debt securities.
The
indenture provides that if an event of default specified in the first, second, third, fourth or sixth bullets above occurs and
is continuing, either the trustee or the holders of at least 25% in aggregate principal amount of the outstanding debt securities
of that series may declare the principal amount of all those debt securities (or, in the case of discount securities or indexed
securities, that portion of the principal amount as may be specified in the terms of that series) to be due and payable immediately.
If an event of default specified in the fifth bullet above occurs and is continuing, then the principal amount of all those debt
securities (or, in the case of discount securities or indexed securities, that portion of the principal amount as may be specified
in the terms of that series) will be due and payable immediately, without any declaration or other act on the part of the trustee
or any holder. In certain cases, holders of a majority in principal amount of the outstanding debt securities of any series may,
on behalf of holders of all those debt securities, rescind and annul a declaration of acceleration.
The
indenture imposes limitations on suits brought by holders of debt securities against us. Except for actions for payment of overdue
principal or interest, no holder of debt securities of any series may institute any action against us under the indenture unless:
|
●
|
the holder has previously
given to the trustee written notice of default and continuance of such default;
|
|
|
|
|
●
|
the holders of at
least 25% in principal amount of the outstanding debt securities of the affected series have requested that the trustee institute
the action;
|
|
|
|
|
●
|
the requesting holders
have offered the trustee indemnity for the reasonable expenses and liabilities that may be incurred by bringing the action;
|
|
|
|
|
●
|
the trustee has
not instituted the action within 60 days of the request and offer of indemnity; and
|
|
|
|
|
●
|
the trustee has
not received inconsistent direction by the holders of a majority in principal amount of the outstanding debt securities of
the affected series.
|
We
will be required to file annually with the trustee a certificate, signed by one of our officers, stating whether or not the officer
knows of any default by us in the performance, observance or fulfillment of any condition or covenant of the indenture.
Discharge,
Defeasance and Covenant Defeasance
We
can discharge or decrease our obligations under the indenture as stated below.
We
may discharge obligations to holders of any series of debt securities that have not already been delivered to the trustee for
cancellation and that have either become due and payable or are by their terms to become due and payable, or are scheduled for
redemption, within one year. We may effect a discharge by irrevocably depositing with the trustee cash or government obligations
denominated in the currency of the debt securities, as trust funds, in an amount certified to be enough to pay when due, whether
at maturity, upon redemption or otherwise, the principal of, and any premium and interest on, the debt securities and any mandatory
sinking fund payments.
Unless
otherwise provided in the applicable prospectus supplement, we may also discharge any and all of our obligations to holders of
any series of debt securities at any time, which we refer to as defeasance. We may also be released from the obligations imposed
by any covenants of any outstanding series of debt securities and provisions of the indenture, and we may omit to comply with
those covenants without creating an event of default under the trust declaration, which we refer to as covenant defeasance. We
may effect defeasance and covenant defeasance only if, among other things:
|
●
|
we irrevocably deposit
with the trustee cash or government obligations denominated in the currency of the debt securities, as trust funds, in an
amount certified to be enough to pay at maturity, or upon redemption, the principal (including any mandatory sinking fund
payments) of, and any premium and interest on, all outstanding debt securities of the series; and
|
|
|
|
|
●
|
we deliver to the
trustee an opinion of counsel from a nationally recognized law firm to the effect that the holders of the series of debt securities
will not recognize income, gain or loss for U.S. federal income tax purposes as a result of the defeasance or covenant defeasance
and that defeasance or covenant defeasance will not otherwise alter the holders’ U.S. federal income tax treatment of
principal, and any premium and interest payments on, the series of debt securities.
|
In
the case of a defeasance by us, the opinion we deliver must be based on a ruling of the Internal Revenue Service issued, or a
change in U.S. federal income tax law occurring, after the date of the indenture, since such a result would not occur under the
U.S. federal income tax laws in effect on that date.
Although
we may discharge or decrease our obligations under the indenture as described in the preceding paragraphs, we may not avoid, among
other things, our duty to register the transfer or exchange of any series of debt securities, to replace any temporary, mutilated,
destroyed, lost or stolen series of debt securities or to maintain an office or agency in respect of any series of debt securities.
Modification
of the Indenture
The
indenture provides that we and the trustee may enter into supplemental indentures without the consent of the holders of debt securities
to, among other things:
|
●
|
evidence the assumption
by a successor entity of our obligations;
|
|
|
|
|
●
|
add to our covenants
for the benefit of the holders of debt securities, or to surrender any rights or power conferred upon us;
|
|
●
|
add any additional
events of default;
|
|
|
|
|
●
|
cure any ambiguity
or correct any inconsistency or defect in the indenture;
|
|
|
|
|
●
|
add to, change or
eliminate any of the provisions of the indenture in a manner that will become effective only when there is no outstanding
debt security which is entitled to the benefit of the provision as to which the modification would apply;
|
|
|
|
|
●
|
secure any debt
securities;
|
|
|
|
|
●
|
establish the forms
or terms of debt securities of any series;
|
|
|
|
|
●
|
evidence and provide
for the acceptance of appointment by a successor trustee and add to or change any of the provisions of the indenture as is
necessary for the administration of the trusts by more than one trustee;
|
|
|
|
|
●
|
modify, eliminate
or add to the provisions of the indenture as shall be necessary to effect the qualification of the indenture under the Trust
Indenture Act of 1939, as amended, or under any similar federal statute later enacted, and to add to the indenture such other
provisions as may be expressly required by the Trust Indenture Act; and
|
|
|
|
|
●
|
make any other provisions
with respect to matters or questions arising under the indenture that will not be inconsistent with any provision of the indenture
as long as the new provisions do not adversely affect the interests of the holders of any outstanding debt securities of any
series created prior to the modification.
|
The
indenture also provides that we and the trustee may, with the consent of the holders of not less than a majority in aggregate
principal amount of debt securities of each series of debt securities affected by such supplemental indenture then outstanding,
add any provisions to, or change in any manner, eliminate or modify in any way the provisions of, the indenture or any supplemental
indenture or modify in any manner the rights of the holders of the debt securities. We and the trustee may not, however, without
the consent of the holder of each outstanding debt security affected thereby:
|
●
|
extend the final
maturity of any debt security;
|
|
|
|
|
●
|
reduce the principal
amount or premium, if any;
|
|
|
|
|
●
|
reduce the rate
or extend the time of payment of interest;
|
|
|
|
|
●
|
reduce the amount
of the principal of any debt security issued with an original issue discount that is payable upon acceleration;
|
|
|
|
|
●
|
change the currency
in which the principal, and any premium or interest, is payable;
|
|
|
|
|
●
|
impair the right
to institute suit for the enforcement of any payment on any debt security when due;
|
|
|
|
|
●
|
if applicable, adversely
affect the right of a holder to convert or exchange a debt security; or
|
|
|
|
|
●
|
reduce the percentage
of holders of debt securities of any series whose consent is required for any modification of the indenture or for waivers
of compliance with or defaults under the indenture with respect to debt securities of that series.
|
The
indenture provides that the holders of not less than a majority in aggregate principal amount of the then-outstanding debt securities
of any series, by notice to the relevant trustee, may on behalf of the holders of the debt securities of that series waive any
default and its consequences under the indenture except:
|
●
|
a default in the
payment of, any premium and any interest on, or principal of, any such debt security held by a nonconsenting holder; or
|
|
|
|
|
●
|
a default in respect
of a covenant or provision of the indenture that cannot be modified or amended without the consent of the holder of each outstanding
debt security of each series affected.
|
Registered
Global Securities and Book Entry System
The
debt securities of a series may be issued in whole or in part in book-entry form and will be represented by one or more fully
registered global securities. We will deposit any registered global securities with a depositary or with a nominee for a depositary
identified in the applicable prospectus supplement and registered in the name of such depositary or nominee. In such case, we
will issue one or more registered global securities denominated in an amount equal to the aggregate principal amount of all of
the debt securities of the series to be issued and represented by such registered global security or securities. This means that
we will not issue certificates to each holder.
Unless
and until it is exchanged in whole or in part for debt securities in definitive registered form, a registered global security
may not be transferred except as a whole:
|
●
|
by the depositary
for the registered global security to its nominee;
|
|
|
|
|
●
|
by a nominee of
the depositary to the depositary or another nominee of the depositary; or
|
|
|
|
|
●
|
by the depositary
or its nominee to a successor of the depositary or a nominee of the successor.
|
The
prospectus supplement relating to a series of debt securities will describe the specific terms of the depositary arrangement involving
any portion of the series represented by a registered global security. We anticipate that the following provisions will apply
to all depositary arrangements for debt securities:
|
●
|
ownership of beneficial
interests in a registered global security will be limited to persons that have accounts with the depositary for such registered
global security, these persons being referred to as “participants,” or persons that may hold interests through
participants;
|
|
|
|
|
●
|
upon the issuance
of a registered global security, the depositary for the registered global security will credit, on its book-entry registration
and transfer system, the participants’ accounts with the respective principal amounts of the debt securities represented
by the registered global security beneficially owned by the participants;
|
|
●
|
any dealers, underwriters,
or agents participating in the distribution of the debt securities will designate the accounts to be credited; and
|
|
|
|
|
●
|
ownership of beneficial
interests in the registered global security will be shown on, and the transfer of the ownership interests will be effected
only through, records maintained by the depositary for the registered global security for interests of participants, and on
the records of participants for interests of persons holding through participants.
|
The
laws of some states may require that specified purchasers of securities take physical delivery of the securities in definitive
form. These laws may limit the ability of those persons to own, transfer or pledge beneficial interests in registered global securities.
So
long as the depositary for a registered global security, or its nominee, is the registered owner of the registered global security,
the depositary or such nominee, as the case may be, will be considered the sole owner or holder of the debt securities represented
by the registered global security for all purposes under the indenture. Except as stated below, owners of beneficial interests
in a registered global security:
|
●
|
will not be entitled
to have the debt securities represented by a registered global security registered in their names;
|
|
●
|
will not receive
or be entitled to receive physical delivery of the debt securities in the definitive form; and
|
|
|
|
|
●
|
will not be considered
the owners or holders of the debt securities under the relevant indenture.
|
Accordingly,
each person owning a beneficial interest in a registered global security must rely on the procedures of the depositary for the
registered global security and, if the person is not a participant, on the procedures of a participant through which the person
owns its interest, to exercise any rights of a holder under the indenture.
We
understand that under existing industry practices, if we request any action of holders or if an owner of a beneficial interest
in a registered global security desires to give or take any action that a holder is entitled to give or take under the indenture,
the depositary for the registered global security would authorize the participants holding the relevant beneficial interests to
give or take the action, and the participants would authorize beneficial owners owning through the participants to give or take
the action or would otherwise act upon the instructions of beneficial owners holding through them.
We
will make payments of principal and premium, if any, and interest, if any, on debt securities represented by a registered global
security registered in the name of a depositary or its nominee to the depositary or its nominee, as the case may be, as the registered
owners of the registered global security. Neither we nor the trustee, or any other agent of ours or the trustee will be responsible
or liable for any aspect of the records relating to, or payments made on account of, beneficial ownership interests in the registered
global security or for maintaining, supervising or reviewing any records relating to the beneficial ownership interests.
We
expect that the depositary for any debt securities represented by a registered global security, upon receipt of any payments of
principal and premium, if any, and interest, if any, in respect of the registered global security, will credit participants’
accounts with payments in amounts proportionate to their respective beneficial interests in the registered global security as
shown on the records of the depositary. We also expect that standing customer instructions and customary practices will govern
payments by participants to owners of beneficial interests in the registered global security held through the participants, as
is now the case with the securities held for the accounts of customers in bearer form or registered in “street name.”
We also expect that any of these payments will be the responsibility of the participants.
If
the depositary for any debt securities represented by a registered global security is at any time unwilling or unable to continue
as depositary or stops being a clearing agency registered under the Securities Exchange Act of 1934, as amended, we will appoint
an eligible successor depositary. If we fail to appoint an eligible successor depositary within 90 days, we will issue the debt
securities in definitive form in exchange for the registered global security. In addition, we may at any time and in our sole
discretion decide not to have any of the debt securities of a series represented by one or more registered global securities.
In that event, we will issue debt securities of the series in a definitive form in exchange for all of the registered global securities
representing the debt securities. The trustee will register any debt securities issued in definitive form in exchange for a registered
global security in the name or names as the depositary, based upon instructions from its participants, shall instruct the trustee.
We
may also issue bearer debt securities of a series in the form of one or more global securities, referred to as “bearer global
securities.” We will deposit these securities with a depositary identified in the prospectus supplement relating to the
series. The prospectus supplement relating to a series of debt securities represented by a bearer global security will describe
the applicable terms and procedures. These will include the specific terms of the depositary arrangement and any specific procedures
for the issuance of debt securities in definitive form in exchange for a bearer global security, in proportion to the series represented
by a bearer global security.
Concerning
the Trustee
The
indenture provides that there may be more than one trustee under the indenture, each for one or more series of debt securities.
If there are different trustees for different series of debt securities, each trustee will be a trustee of a trust under the indenture
separate and apart from the trust administered by any other trustee under that indenture. Except as otherwise indicated in this
prospectus or any prospectus supplement, any action permitted to be taken by a trustee may be taken by such trustee only on the
one or more series of debt securities for which it is the trustee under the indenture. Any trustee under the indenture may resign
or be removed from one or more series of debt securities. All payments of principal of, and any premium and interest on, and all
registration, transfer, exchange, authentication and delivery of, the debt securities of a series will be effected by the trustee
for that series at an office designated by the trustee.
The
indenture provides that, except during the continuance of an event of default, the trustee will perform only such duties as are
specifically set forth in the indenture. During the existence of an event of default, the trustee will exercise those rights and
powers vested in it under the indenture and use the same degree of care and skill in its exercise as a prudent person would exercise
under the circumstances in the conduct of such person’s own affairs.
If
the trustee becomes a creditor of ours, the indenture places limitations on the right of the trustee to obtain payment of claims
or to realize on property received in respect of any such claim as security or otherwise. The trustee may engage in other transactions.
If it acquires any conflicting interest relating to any duties concerning the debt securities, however, it must eliminate the
conflict or resign as trustee.
No
Individual Liability of Incorporators, Stockholders, Officers or Directors
The
indenture provides that no past, present or future director, officer, stockholder or employee of ours, any of our affiliates,
or any successor corporation, in their capacity as such, shall have any individual liability for any of our obligations, covenants
or agreements under the debt securities or the indenture. This release may not be effective to waive liabilities into U.S federal
securities laws, and it is the view of the SEC that such a waiver is against public policy.
Governing
Law
The
indenture and the debt securities will be governed by, and construed in accordance with, the laws of the State of New York.
DESCRIPTION
OF WARRANTS
We
may issue warrants for the purchase of shares of our common stock or preferred stock or of debt securities. We may issue warrants
independently or together with other securities, and the warrants may be attached to or separate from any offered securities.
If a series of warrants will be issued under a separate warrant agreement to be entered into between us and the investors or a
warrant agent, we will so specify in the applicable prospectus supplement. The following summary of the material provisions of
the warrants and warrant agreements is subject to, and qualified in its entirety by reference to, all the provisions of the warrants
and any warrant agreement applicable to a particular series of warrants. The terms of any warrants offered under a prospectus
supplement may differ from the terms described below. We urge you to read the applicable prospectus supplement, as well as the
complete warrants and warrant agreements that contain the terms of the warrants.
The
material terms of any issue of warrants will be described in the prospectus supplement relating to the issue. Those terms may
include:
|
●
|
the number of shares
of common stock or preferred stock purchasable upon the exercise of warrants to purchase such shares and the price at which
such number of shares may be purchased upon such exercise;
|
|
|
|
|
●
|
a summary of the
designation and terms (including, without limitation, liquidation, dividend, conversion and voting rights) of the series of
preferred stock purchasable upon exercise of warrants to purchase preferred stock as set forth in the certificate of designation
for such series of preferred stock;
|
|
|
|
|
●
|
the principal amount
of debt securities that may be purchased upon exercise of a debt warrant and the exercise price for the warrants, which may
be payable in cash, securities or other property;
|
|
●
|
the date, if any,
on and after which the warrants and the related debt securities, preferred stock or common stock will be separately transferable;
|
|
|
|
|
●
|
the terms of any
rights to redeem or call the warrants;
|
|
|
|
|
●
|
the date on which
the right to exercise the warrants will commence and the date on which the right will expire;
|
|
|
|
|
●
|
U.S. federal income
tax consequences applicable to the warrants; and
|
|
|
|
|
●
|
any additional terms
of the warrants, including terms, procedures, and limitations relating to the exchange, exercise and settlement of the warrants.
|
Each
warrant will entitle its holder to purchase the principal amount of debt securities or the number of shares of preferred stock
or common stock at the exercise price set forth in, or calculable as set forth in, the applicable prospectus supplement. Unless
we otherwise specify in the applicable prospectus supplement, holders of the warrants may exercise the warrants at any time up
to the specified time on the expiration date that we set forth in the applicable prospectus supplement. After the close of business
on the expiration date, unexercised warrants will become void.
A
holder of warrant certificates may exchange them for new warrant certificates of different denominations, present them for registration
of transfer and exercise them at the corporate trust office of the warrant agent or any other office indicated in the applicable
prospectus supplement. Until any warrants to purchase debt securities are exercised, the holder of the warrants will not have
any rights of holders of the debt securities that can be purchased upon exercise, including any rights to receive payments of
principal, premium or interest on the underlying debt securities or to enforce covenants in the applicable indenture. Until any
warrants to purchase common stock or preferred stock are exercised, the holders of the warrants will not have any rights of holders
of the underlying common stock or preferred stock, including any rights to receive dividends or payments upon any liquidation,
dissolution or winding up on the common stock or preferred stock, if any.
DESCRIPTION
OF UNITS
We
may issue units consisting of any combination of the other types of securities offered under this prospectus in one or more series.
We may elect to evidence each series of units by unit certificates that we will issue under a separate unit agreement. We may
enter into unit agreements with a unit agent. Each unit agent will be a bank or trust company that we select. We will indicate
the name and address of the unit agent in the applicable prospectus supplement relating to a particular series of units.
The
following description, together with the additional information included in any applicable prospectus supplement, summarizes the
general features of the units that we may offer under this prospectus. You should read any prospectus supplement related to the
series of units being offered, as well as the complete unit agreements that contain the terms of the units. Specific unit agreements
will contain additional important terms, and we will file as an exhibit to the registration statement of which this prospectus
is a part, or will incorporate by reference from another report that we file with the SEC, the form of each unit agreement relating
to units offered under this prospectus.
If
we offer any units, certain terms of that series of units will be described in the applicable prospectus supplement, including,
without limitation, the following, as applicable:
|
●
|
the title of the
series of units;
|
|
|
|
|
●
|
identification and
description of the separate constituent securities comprising the units;
|
|
|
|
|
●
|
the price or prices
at which the units will be issued;
|
|
●
|
the date, if any,
on and after which the constituent securities comprising the units will be separately transferable;
|
|
|
|
|
●
|
a discussion of
certain U.S. federal income tax considerations applicable to the units; and
|
|
|
|
|
●
|
any other material
terms of the units and their constituent securities.
|
PLAN
OF DISTRIBUTION.
We
may sell the securities covered by this prospectus from time to time pursuant to underwritten public offerings, negotiated transactions,
block trades or a combination of these methods or through underwriters or dealers, through agents and/or directly to one or more
purchasers. The securities may be distributed from time to time in one or more transactions:
|
●
|
at a fixed price
or prices, which may be changed;
|
|
|
|
|
●
|
at market prices
prevailing at the time of sale;
|
|
|
|
|
●
|
at prices related
to such prevailing market prices; or
|
|
|
|
|
●
|
at negotiated prices.
|
Each
time that we sell securities covered by this prospectus, we will provide a prospectus supplement or supplements that will describe
the method of distribution and set forth the terms and conditions of the offering of such securities, including the offering price
of the securities and the proceeds to us, if applicable.
Offers
to purchase the securities being offered by this prospectus may be solicited directly. Agents may also be designated to solicit
offers to purchase the securities from time to time. Any agent involved in the offer or sale of our securities will be identified
in a prospectus supplement.
If
a dealer is utilized in the sale of the securities being offered by this prospectus, the securities will be sold to the dealer,
as principal. The dealer may then resell the securities to the public at varying prices to be determined by the dealer at the
time of resale.
If
an underwriter is utilized in the sale of the securities being offered by this prospectus, an underwriting agreement will be executed
with the underwriter at the time of sale and the name of any underwriter will be provided in the prospectus supplement that the
underwriter will use to make resales of the securities to the public. In connection with the sale of the securities, we or the
purchasers of securities for whom the underwriter may act as agent, may compensate the underwriter in the form of underwriting
discounts or commissions. The underwriter may sell the securities to or through dealers, and those dealers may receive compensation
in the form of discounts, concessions or commissions from the underwriters and/or commissions from the purchasers for which they
may act as agent. Unless otherwise indicated in a prospectus supplement, an agent will be acting on a best efforts basis and a
dealer will purchase securities as a principal, and may then resell the securities at varying prices to be determined by the dealer.
Any
compensation paid to underwriters, dealers or agents in connection with the offering of the securities, and any discounts, concessions
or commissions allowed by underwriters to participating dealers, will be described in the applicable prospectus supplement. Underwriters,
dealers and agents participating in the distribution of the securities may be deemed to be underwriters within the meaning of
the Securities Act of 1933, as amended (the “Securities Act”), and any discounts and commissions received by them
and any profit realized by them on resale of the securities may be deemed to be underwriting discounts and commissions. We may
enter into agreements to indemnify underwriters, dealers and agents against civil liabilities, including liabilities under the
Securities Act, or to contribute to payments they may be required to make in respect thereof and to reimburse those persons for
certain expenses.
Any
common stock issued by us will be traded on The Nasdaq Capital Market unless we specify otherwise in the prospectus supplement,
but any other securities may or may not be publicly traded or listed on a national securities exchange. To facilitate the offering
of securities, certain persons participating in the offering may engage in transactions that stabilize, maintain or otherwise
affect the price of the securities. This may include over-allotments or short sales of the securities, which involve the sale
by persons participating in the offering of more securities than were sold to them. In these circumstances, these persons would
cover such over-allotments or short positions by making purchases in the open market or by exercising their over-allotment option,
if any. In addition, these persons may stabilize or maintain the price of the securities by bidding for or purchasing securities
in the open market or by imposing penalty bids, whereby selling concessions allowed to dealers participating in the offering may
be reclaimed if securities sold by them are repurchased in connection with stabilization transactions. The effect of these transactions
may be to stabilize or maintain the market price of the securities at a level above that which might otherwise prevail in the
open market. These transactions may be discontinued at any time.
If
indicated in the applicable prospectus supplement, underwriters or other persons acting as agents may be authorized to solicit
offers by institutions or other suitable purchasers to purchase the securities at the public offering price set forth in the prospectus
supplement, pursuant to delayed delivery contracts providing for payment and delivery on the date or dates stated in the prospectus
supplement. These purchasers may include, among others, commercial and savings banks, insurance companies, pension funds, investment
companies and educational and charitable institutions. Delayed delivery contracts will be subject to the condition that the purchase
of the securities covered by the delayed delivery contracts will not at the time of delivery be prohibited under the laws of any
jurisdiction in the United States to which the purchaser is subject. The underwriters and agents will not have any responsibility
with respect to the validity or performance of these contracts.
We
may engage in at-the-market offerings into an existing trading market in accordance with Rule 415(a)(4) under the Securities Act.
In addition, we may enter into derivative transactions with third parties, or sell securities not covered by this prospectus to
third parties in privately negotiated transactions. If the applicable prospectus supplement so indicates, in connection with those
derivatives, the third parties may sell securities covered by this prospectus and the applicable prospectus supplement, including
in short sale transactions. If so, the third party may use securities pledged by us or borrowed from us or others to settle those
sales or to close out any related open borrowings of stock, and may use securities received from us in settlement of those derivatives
to close out any related open borrowings of stock. The third party in such sale transactions will be an underwriter and, if not
identified in this prospectus, will be named in the applicable prospectus supplement. In addition, we may otherwise loan or pledge
securities to a financial institution or other third party that in turn may sell the securities short using this prospectus and
an applicable prospectus supplement. Such financial institution or other third party may transfer its economic short position
to investors in our securities or in connection with a concurrent offering of other securities.
The
specific terms of any lock-up provisions in respect of any given offering will be described in the applicable prospectus supplement.
In
compliance with the guidelines of the Financial Industry Regulatory Authority, Inc. (“FINRA”), the maximum consideration
or discount to be received by any FINRA member or independent broker dealer may not exceed 8% of the aggregate proceeds of the
offering.
The
underwriters, dealers and agents may engage in transactions with us, or perform services for us, in the ordinary course of business
for which they receive compensation.
LEGAL
MATTERS
TroyGould
PC, Los Angeles, California, has issued an opinion about certain legal matters with respect to the securities offered by this
prospectus. Certain attorneys employed by TroyGould PC beneficially own shares of our common stock constituting in the aggregate
less than 1% of our outstanding shares of common stock. Additional legal matters may be passed upon for us, or for any underwriters,
dealers or agents, by counsel that we name in the applicable prospectus supplement.
EXPERTS
The
financial statements of Sigma Labs, Inc. as of December 31, 2017 and for the year then ended, which are incorporated into this
prospectus by reference to our Annual Report on Form 10-K for the year ended December 31, 2017, have been so incorporated in reliance
on the report of Haynie & Company, an independent registered public accounting firm, given on the authority of said firm as
experts in auditing and accounting. The financial statements of Sigma Labs, Inc. as of December 31, 2016 and for the year then
ended, which are incorporated into this prospectus by reference to our Annual Report on Form 10-K for the year ended December
31, 2017, have been so incorporated in reliance on the report of Pritchett, Siler & Hardy, P.C, an independent registered
public accounting firm, given on the authority of said firm as experts in auditing and accounting.
WHERE
YOU CAN FIND MORE INFORMATION
We
are subject to the information and periodic reporting requirements of the Securities Exchange Act of 1934, as amended (the “Exchange
Act”) and, in accordance with that act, file periodic reports and other information with the SEC. The periodic reports and
other information filed by us are available for inspection and copying at prescribed rates at the SEC’s Public Reference
Room at 100 F Street, N.E., Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330 for further information about the operation
of the SEC’s Public Reference Room. The SEC also maintains an Internet site that contains all reports and other information
that we file electronically with the SEC. The address of that website is www.sec.gov.
This
prospectus is part of a registration statement on Form S-3 that we have filed with the SEC under the Securities Act for the securities
offered under this prospectus (the “Form S-3 Registration Statement”). The Form S-3 Registration Statement, including
the exhibits to the Form S-3 Registration Statement, contains additional information about us and the securities offered by this
prospectus. The rules and regulations of the SEC allow us to omit from this prospectus certain information that is included in
the Form S-3 Registration Statement. For further information about us and our securities, you should review the Form S-3 Registration
Statement and the exhibits filed with the Form S-3 Registration Statement.
INCORPORATION
OF CERTAIN INFORMATION BY REFERENCE
The
SEC allows us to incorporate into this prospectus by reference the information we file with it, which means that we can disclose
important information to you by referring you to the documents containing that information. The information incorporated by reference
is considered to be part of this prospectus, and information that we later file with the SEC will automatically update and, where
applicable, modify or supersede that information.
We
incorporate by reference into this prospectus the following documents that we have filed, or will file, with the SEC:
|
●
|
Our Annual Report
on Form 10-K for the fiscal year ended December 31, 2017, filed with the SEC on April 17, 2018;
|
|
|
|
|
●
|
Our Quarterly Report
on Form 10-Q for the quarter ended March 31, 2018, filed with the SEC on May 15, 2018;
|
|
|
|
|
●
|
Our Current Reports
on Form 8-K filed with the SEC on April 25, 2018, May 15, 2018 and May 24, 2018, respectively;
|
|
|
|
|
●
|
The description
of our common stock contained in our registration statement on Form 8-A, filed with the SEC on February 14, 2017, and any
amendment or report subsequently filed for the purpose of updating such description; and
|
|
|
|
|
●
|
Each document that
we file with the SEC under Section 13(a), 13(c), 14 or 15(d) of the Exchange Act after the date on which we filed the Form
S-3 Registration Statement and before the termination of this offering, with information in each such filing to be deemed
to be incorporated by reference into this prospectus as of the date we make the filing with the SEC.
|
You
may request a copy of any of these filings from us at no cost by writing or calling our Chief Executive Officer at the following
address or telephone number: Sigma Labs, Inc.; 3900 Paseo del Sol, Santa Fe, New Mexico 87507; (505) 438-2576.
Notwithstanding
the foregoing, no portion of any document that is “furnished” but not “filed” in accordance with SEC rules
under Exchange Act shall be deemed to be incorporated by reference into the Form S-3 Registration Statement. Any statement contained
in the Form S-3 Registration Statement or in a document incorporated by reference into the Form S-3 Registration Statement will
be deemed to be modified or superseded for purposes of the Form S-3 Registration Statement to the extent that a statement contained
in the Form S-3 Registration Statement or in any other subsequently filed document that is incorporated by reference into the
Form S-3 Registration Statement modifies or supersedes the statement. Any statement so modified or superseded will not be deemed,
except as so modified or superseded, to constitute a part of the Form S-3 Registration Statement.
493,027 Shares of Common Stock
Warrants
to Purchase 22,438 Shares of Common Stock
PROSPECTUS
SUPPLEMENT
DAWSON
JAMES
April
6, 2020
Sigma Labs (NASDAQ:SGLB)
Historical Stock Chart
From Apr 2024 to May 2024
Sigma Labs (NASDAQ:SGLB)
Historical Stock Chart
From May 2023 to May 2024