TIDMSOLG
RNS Number : 5590U
SolGold PLC
13 July 2018
13 July 2018
SolGold plc
("SolGold" or the "Company")
Cascabel Exploration Update
Drilling results promise further growth at Alpala
Aguinaga Hole 6 intersects strong mineralisation 30m below
surface
The Board of SolGold (LSE and TSX code: SOLG) is pleased to
provide an update on the drilling programs at Alpala and Aguinaga,
at the Company's Cascabel project in Northern Ecuador.
HIGHLIGHTS:
Ø Extension drilling at Alpala Central 'High-Grade Core" is
expected to extend the high-grade mineralisation along the lower
and northeast margins of the deposit. Infill drilling at Alpala
Central is expected to contribute to an upgrade of the resource,
where early stage copper and gold rich intrusions appear on drill
evidence to be more continuous than previously modelled. Hole 55R
returned 458m @ 0.71% CuEq (incl. 66m @ 1.17% CuEq). Hole 41-D1-D2,
has thus far intersected over 380m of visible copper sulphide
mineralisation, including visual estimates of over 4% Chalcopyrite
(drilling continues). Hole 58 intersected approximately 980m of
visible copper sulphide mineralisation, including estimates of over
2.5% Chalcopyrite (assay results pending).
Ø Extension drilling at Alpala Central "Western Lobe" continues
to intersect shallow mineralisation above the existing resource
limits along the southwest margin of the deposit, in a large lobe
of early diorite intrusion hosting high-grade mineralisation
(>1.5% CuEq) to within 450m of surface, approximately 250m
closer to surface than previously modelled. Hole 60 intersected
approximately 180m of visible copper sulphide mineralisation,
including visual estimates of over 5.5% Chalcopyrite (assay results
pending).
Ø Extension drilling at Alpala Northwest and Trivinio continues
to extend the Alpala deposit. Hole 56 intersected a strongly
altered fault zone returning 4m @ 172.00g/t Au (QAQC re-assay of
pulp, reject, and quarter core re-assay pending). Hole 56-D1, has
thus far intersected approximately 305m of visible copper sulphide
mineralisation, (drilling continues). Hole 59R intersected
approximately 570m of visible copper sulphide mineralisation (assay
results pending).
Ø Aguinaga drilling has confirmed near surface potential. Hole 6
has intersected strongly mineralised early diorite intrusion, with
visual estimates of over 3% Chalcopyrite mineralisation, from 30m
below surface (drilling continues). Hole 7 has thus far intersected
67m of visual copper sulphide mineralisation from 55m below surface
(drilling continues).
References to figures and tables relate to the version of this
release on the Company's website (www.solgold.com.au) or visible in
PDF format by clicking the link below:
http://www.rns-pdf.londonstockexchange.com/rns/5590U_1-2018-7-13.pdf
FURTHER INFORMATION
The Cascabel Project is located on the northern section of the
prolific Andean Copper belt, renowned as the base for nearly half
of the world's copper production. The project area hosts
mineralisation of Eocene age, the same age as numerous Tier 1
deposits along the Andean Copper Belt in Chile and Peru to the
south. The project base is located at Rocafuerte in northern
Ecuador, approximately three-hour drive north of Quito, close to
water, power supply and Pacific ports (Figure 1). Having fulfilled
its earn in requirements, SolGold is a registered shareholder with
an unencumbered legal and beneficial 85% interest in ENSA
(Exploraciones Novomining S.A.) which holds 100% of the Cascabel
tenement covering approximately 50km(2) .
Approximately 127,000m of diamond drilling has been completed on
the project. Currently, 12 drill rigs are active on site, with 10
rigs drilling on the Alpala cluster (Figure 2), and 2 rigs drilling
at the Aguinaga prospect (Figure 3). The Cascabel drill program
focusses on extending and infilling the Alpala Resource, as well as
further drill testing of the evolving Aguinaga prospect, as
drilling homes in on the geometry and extent of early diorite
intrusions hosting copper-gold mineralisation. Drill testing of the
Trivinio target has commenced, whilst the numerous other untested
targets, namely at Moran, Cristal, Tandayama-America and
Chinambicito, are flagged for drill testing as overall program
demands allow.
A detailed summary of recent assay results at Alpala and
Aguinaga is shown in Figure 4.
Alpala Targeted Resource Additions and Conversions
Assay results from the initial 53,616m of drilling at Alpala
were incorporated into the Alpala maiden Mineral Resource Estimate
(MRE) completed in December 2017 and announced on 3 January 2018. A
further 73,384m of drilling has been completed since development of
the MRE, and major resource growth is expected in a revised
MRE.
SolGold geologists continue to observe extensions of
mineralisation outside current inferred and indicated resource
blocks at Alpala as well as substantial upgrading of previously
estimated resource tonnage to higher grades as drill hole density
increases throughout the deposit area.
The recent and ongoing drilling at Alpala Central is also
predicted to significantly increase the resource estimate of the
high-grade core at Alpala. Infill drilling at Alpala Central is
expected to upgrade the high-grade resource, where early stage
copper and gold rich intrusions appear on drill evidence to be more
continuous than previously modelled.
Extension drilling at Alpala Central is expected to extend
mineralisation beyond the high-grade resource along the lower and
northeast margins of the deposit, whilst drilling at Alpala
Northwest and Alpala Southeast continues to expand the Alpala
Deposit.
Extension drilling at Alpala Central continues to intersect
shallow mineralisation above the existing resource limits, along
the southwest margin of the deposit, in a large lobe of early
diorite intrusion hosting high-grade mineralisation (>1.5% CuEq)
to within 450m of surface, approximately 250m closer to surface
than previously modelled.
Exploration drilling at Trivinio prospect recently revealed a
new potential for major north extensions to the Alpala deposit.
Highlights from recent visual estimates and assayed drilling
results at Alpala include:
-- Hole 55R (Alpala Central 'High-Grade Core"): 458m @ 0.71%
CuEq (including 66m @ 1.17% CuEq).
-- Hole 57 (Alpala Central 'High-Grade Core"): partial assay
results to 682m, 124m @ 0.60% CuEq (including 60m @ 0.74% CuEq)
both open at depth. Drilling continues. Further assay results
pending.
-- Hole 58 (Alpala Central 'High-Grade Core"): approximately
980m of visible copper sulphide mineralisation, including visual
estimates of over 2.5% Chalcopyrite. Assay results pending. *
-- Hole 41-D1-D2 (Alpala Central 'High-Grade Core"): thus far
over 380m of visible copper sulphide mineralisation, including
visual estimates of over 4% Chalcopyrite. Drilling continues.*
-- Hole 60 (Alpala Central "Western Lobe"): approximately 180m
of visible copper sulphide mineralisation, including visual
estimates of over 5.5% Chalcopyrite. Assay results pending.*
-- Hole 54 (Alpala Northwest): 102m @ 0.43% CuEq.
-- Hole 56 (Alpala Northwest): partial assay results to 870m,
604m @ 0.45% CuEq (incl. 186m @ 0.59% CuEq).
-- Hole 56 (Alpala Northwest): strongly altered fault zone, 4m @
172.00g/t Au, from 448m depth (QAQC re-assay of pulp, reject, and
quarter core re-assay pending).
-- Hole 56-D1 (Alpala Northwest): approximately 305m of visible
copper sulphide mineralisation, open at depth. Drilling
continues.
-- Hole 59R (Alpala Northwest): approximately 570m of visible
copper sulphide mineralisation, open at depth. Assay results
pending.
-- Hole 53 (Alpala Southeast): over 400m of visible copper
mineralisation, and over 190m of strong highly visible copper
mineralisation. Final assay results pending.
* estimates of visual mineralization should not be interpreted
with the same confidence as assay results
Drill hole assays have been received for 102,193m metres of
drilling to date, whilst approximately 24,800m of drilling has
assays pending. Recent construction of an in-country certified
preparation facility by ALS Global is expected to further expedite
assay turnaround.
Aguinaga Drilling Program
Aguinaga drilling is progressing with hole 7 under way. Hole 6
intersected strongly mineralised early diorite intrusion, with
visual estimates of over 3% Chalcopyrite mineralisation, from 30m
below surface. Hole 6 is located near the summit of Aguinaga hill
and lies approximately 400m SSE of mineralisation discovered in
previous drill holes. Hole 7 has thus far intersected 67m of visual
copper sulphide mineralisation from 55m below surface.
Drilling now demonstrates a vertical column to the mineralising
system of more than 700m, a width of up to 350m, along a 400m
length. The drilling program at Aguinaga is in its early stages. As
drilling progresses, the geometry and extent of mineralisation is
becoming more apparent. The evolving near surface potential at
Aguinaga, coupled with strong propylitic alteration encountered
along the bottom 150m of hole 1 provides strong potential for
ongoing discoveries through further drilling.
The scope for a significant near surface copper-gold deposit at
Aguinaga may prove beneficial as early mill feed for the project
whilst the main Alpala Decline progresses towards the initial
extraction levels at the Alpala Deposit.
Photographs of typical mineralisation within the early diorite
intrusion intersected in Hole 6 thus far are shown in Figure 5.
Market Abuse Regulation (MAR) Disclosure
Certain information contained in this announcement would have
been deemed inside information for the purposes of Article 7 of the
Regulation (EU) No 596/2014 until the release of this
announcement.
Qualified Person:
Information in this report relating to the exploration results
is based on data reviewed by Mr Jason Ward ((CP) B.Sc. Geol.),
Exploration Manager Global of the Company. Mr Ward is a Member of
the Australasian Institute of Mining and Metallurgy, holds the
designation MAusIMM (CP), and has in excess of 20 years' experience
in mineral exploration and is a Qualified Person for the purposes
of the relevant LSE and TSX Rules. Mr Ward consents to the
inclusion of the information in the form and context in which it
appears.
By order of the Board
Karl Schlobohm
Company Secretary
CONTACTS
Mr Nicholas Mather Tel: +61 (0) 7 3303 0665
SolGold Plc (Chief Executive Officer) +61 (0) 417 880 448
nmather@solgold.com.au
Mr Karl Schlobohm Tel: +61 (0) 7 3303 0661
SolGold Plc (Company Secretary)
kschlobohm@solgold.com.au
Ms Anna Legge Tel: +44 (0) 20 3823 2131
SolGold Plc (Public Relations/Investor Relations)
alegge@solgold.com.au
Follow us on twitter @SolGold_plc
ABOUT SOLGOLD
SolGold is a leading exploration company focussed on the
discovery and definition of world-class copper and gold deposits.
In 2017 SolGold's management team was recognised as an example of
excellence in the industry, and continue to strive to deliver
objectives efficiently and in the interests of shareholders.
SolGold is the largest and most active concession holder in Ecuador
and is aggressively exploring the length and breadth of this highly
prospective section of the Andean Copper Belt.
Ecuador dedicated to become a serious mining nation
Ecuador has, over the last 5 years, been recognised globally as
a frontrunner in emerging mining nations as it develops regulatory
and fiscal frameworks to facilitate the development of a fiscally,
socially and environmentally strong and responsible mining
industry.
Dedicated stakeholders
SolGold employs a staff of over 400 and at least 90% are
Ecuadorean. This is expected to grow as the operations at Alpala,
and in Ecuador generally, expand. SolGold focusses its operations
to be safe, reliable and environmentally responsible and maintains
close relationships with its local communities. SolGold has engaged
an increasingly skilled refined and experienced team of
geoscientists using state of the art geophysical and geochemical
modelling applied to an extensive data base to enable the delivery
of ore grade intersections from nearly every drill hole at
Alpala.
About Cascabel and Alpala
The Alpala deposit is the main target in the Cascabel
concession, located on the northern section of the heavily endowed
Andean Copper Belt, the entirety of which is renowned as the base
for nearly half of the world's copper production. The project area
hosts mineralisation of Eocene age, the same age as numerous Tier 1
deposits along the Andean Copper Belt in Chile and Peru to the
south. The project base is located at Rocafuerte in northern
Ecuador, an approximately three hour drive north of Quito, close to
water, power supply and Pacific ports (Figure 1).
Alpala has produced some of the greatest drill hole intercepts
in porphyry copper-gold exploration history, as indicated by Hole
12 (CSD-16-012) returning 1560m grading 0.59% copper and 0.54 g/t
gold including, 1044m grading 0.74% copper and 0.54 g/t gold.
Having fulfilled its earn in requirements, SolGold is a
registered shareholder with an unencumbered legal and beneficial
85% interest in ENSA (Exploraciones Novomining S.A.) which holds
100% of the Cascabel concession covering approximately 50km2. The
junior equity owner in ENSA is required to repay 15% of costs since
SolGold's earn in was completed, from 90% of its share of
distribution of earnings or dividends from ENSA or the Cascabel
concession. It is also required to contribute to development or be
diluted and if its interest falls below 10%, it shall reduce to a
0.5% NSR royalty which SolGold may acquire for US$3.5m.
Approximately 123,500m of diamond drilling has been completed on
the project. With 12 rigs currently active on the project (10 rigs
drilling on the Alpala cluster (Figure 2), and 2 rigs drilling at
the Aguinaga prospect (Figure 3)), SolGold produces some 10,000m of
core every month. The Cascabel drill program currently focusses on
extending and upgrading the status of the Alpala Resource, as well
as further drill testing of the rapidly evolving Aguinaga prospect.
Drill testing of the Trivinio target has commenced, whilst the
numerous other untested targets, namely at Moran, Cristal,
Tandayama-America and Chinambicito, are flagged for drill testing
as overall program demands allow.
Since the publication of the Alpala Maiden Mineral Resource
Estimate in January 2018, which outlined a contained metal
inventory of 5.2 million tonnes of copper and 12.6 million ounces
of gold, the company has nearly doubled both drilled and reported
metreage and will produce a revised resource statement addressing
the evident growth in the size of the deposit at the conclusion of
the current Alpala drill programme. Investors should consult the
technical report dated December 18, 2017 for a detailed account of
the assumptions on which the estimates were based as well as any
known legal, political, environmental and other risks that could
materially affect the development of the resources.
Getting Alpala advanced towards development
SolGold has appointed feasibility management to initially
address the production of a preliminary economic assessment (PEA ),
prior to the prefeasibility and feasibility studies.
The resource at the Alpala deposit boasts a high grade core
which, in the event of the construction of a mine, is targeted to
facilitate early cashflows and an accelerated payback of initial
capital. SolGold is currently investigating development and
financing options available to the company for the development of
Cascabel on reaching feasibility.
SolGold's regional push
SolGold is using its successful and cost efficient blueprint
established at Alpala, and Cascabel generally, to explore for
additional world class projects across Ecuador. SolGold is the
largest and most active concessionaire in Ecuador having recognised
as early as 2014 that the country hosted the same untested
prospectivity as the Northern Chilean section of the Andean Copper
Belt, which accounts for some 25% of the world's copper
resources.
The Company believes Alpala is just the beginning for SolGold in
Ecuador. The company wholly owns four other subsidiaries active
throughout the country that are now focussed on ten high priority
gold and copper resource targets, many of which the Company
believes have the potential, subject to resource definition and
feasibility, to be developed in close succession or even on a more
accelerated basis from Alpala.
SolGold is listed on the London Stock Exchange and Toronto Stock
Exchange (LSE/TSX: SOLG). The company has on issue a total of
1,696,245,686 fully-paid ordinary shares, 31,795,884 share options
exercisable at 28p; 9,795,884 share options exercisable at 14p and
46,762,000 share options exercisable at 60p.
See www.solgold.com.au for more information. Follow us on
twitter @SolGold_plc
CAUTIONARY NOTICE
News releases, presentations and public commentary made by
SolGold plc (the "Company") and its Officers may contain certain
statements and expressions of belief, expectation or opinion which
are forward looking statements, and which relate, inter alia, to
interpretations of exploration results to date and the Company's
proposed strategy, plans and objectives or to the expectations or
intentions of the Company's Directors. Such forward-looking and
interpretative statements involve known and unknown risks,
uncertainties and other important factors beyond the control of the
Company that could cause the actual performance or achievements of
the Company to be materially different from such interpretations
and forward-looking statements.
Accordingly, the reader should not rely on any interpretations
or forward-looking statements; and save as required by the exchange
rules of the TSX and LSE or by applicable laws, the Company does
not accept any obligation to disseminate any updates or revisions
to such interpretations or forward-looking statements. The Company
may reinterpret results to date as the status of its assets and
projects changes with time expenditure, metals prices and other
affecting circumstances.
This release may contain "forward--looking information" within
the meaning of applicable Canadian securities legislation.
Forward--looking information includes, but is not limited to,
statements regarding the Company's plans for developing its
properties. Generally, forward--looking information can be
identified by the use of forward-looking terminology such as
"plans", "expects" or "does not expect", "is expected", "budget",
"scheduled", "estimates", "forecasts", "intends", "anticipates" or
"does not anticipate", or "believes", or variations of such words
and phrases or state that certain actions, events or results "may",
"could", "would", "might" or "will be taken", "occur" or "be
achieved".
Forward--looking information is subject to known and unknown
risks, uncertainties and other factors that may cause the actual
results, level of activity, performance or achievements of the
Company to be materially different from those expressed or implied
by such forward--looking information, including but not limited to:
transaction risks; general business, economic, competitive,
political and social uncertainties; future prices of mineral
prices; accidents, labour disputes and shortages and other risks of
the mining industry. Although the Company has attempted to identify
important factors that could cause actual results to differ
materially from those contained in forward-looking information,
there may be other factors that cause results not to be as
anticipated, estimated or intended. There can be no assurance that
such information will prove to be accurate, as actual results and
future events could differ materially from those anticipated in
such statements. Accordingly, readers should not place undue
reliance on forward--looking information. The Company does not
undertake to update any forward-looking information, except in
accordance with applicable securities laws.
The Company and its officers do not endorse, or reject or
otherwise comment on the conclusions, interpretations or views
expressed in press articles or third-party analysis, and where
possible aims to circulate all available material on its
website.
The Company recognises that the term "World Class" is subjective
and for the purpose of the Company's projects the Company considers
the drilling results at the growing Alpala Porphyry Copper Gold
Deposit at its Cascabel Project to represent intersections of a
"World Class" deposit. The Company considers that "World Class"
deposits are rare, very large, long life, low cost, and are
responsible for approximately half of total global metals
production.
"World Class" deposits are generally accepted as deposits of a
size and quality that create multiple expansion opportunities, and
have or are likely to demonstrate robust economics that ensure
development irrespective of position within the global commodity
cycles, or whether or not the deposit has been fully drilled out,
or a feasibility study completed.
Standards drawn from industry experts (1) Singer and Menzie,
2010; (2) Schodde, 2006; (3) Schodde and Hronsky, 2006; (4) Singer,
1995; (5) Laznicka, 2010) have characterised "World Class" deposits
at prevailing commodity prices. The relevant criteria for "World
Class" deposits, adjusted to current long run commodity prices, are
considered to be those holding or likely to hold more than 5
million tonnes of copper and/or more than 6 million ounces of gold
with a modelled net present value of greater than USD 1
Billion.
The Company and its external consultants prepared an initial
mineral resource estimate at the Cascabel Project in December 2017.
Results are summarised in Table B attached.
The Mineral Resource Estimate was completed from 53,616m of
drilling, approximately 84% of 63,500m metres drilled as of
mid-December 2017, the cut-off date for the maiden resource
calculation. There remains strong potential for further growth from
more recent drilling results, and continue rapid growth of the
deposit.
Any development or mining potential for the project remains
speculative.
Drill hole intercepts have been updated to reflect current
commodity prices, using a data aggregation method, defined by
copper equivalent cut-off grades and reported with up to 10m
internal dilution, excluding bridging to a single sample. Copper
equivalent grades are calculated using a gold conversion factor of
0.63, determined using an updated copper price of USD3.00/pound and
an updated gold price of USD1300/ounce. True widths of down hole
intersections are estimated to be approximately 25-50%.
On the basis of the drilling results to date and the results of
the Alpala Maiden Mineral Resource Estimate, the reference to the
Cascabel Project as "World Class" (or "Tier 1") is considered to be
appropriate. Examples of global copper and gold discoveries since
2006 that are generally considered to be "World Class" are
summarised in Table A.
References cited in the text:
1. Singer, D.A. and Menzie, W.D., 2010. Quantitative Mineral
Resource Assessments: An Integrated Approach. Oxford University
Press Inc.
2. Schodde, R., 2006. What do we mean by a world class deposit?
And why are they special. Presentation. AMEC Conference, Perth.
3. Schodde, R and Hronsky, J.M.A, 2006. The Role of World-Class
Mines in Wealth Creation. Special Publications of the Society of
Economic Geologists Volume 12.
4. Singer, D.A., 1995, World-class base and precious metal
deposits-a quantitative analysis: Economic Geology, v. 90, no.1, p.
88-104.
5. Laznicka, P., 2010. Giant Metallic Deposits: Future Sources
of Industrial Metal, Second Edition. Springer-Verlag
Heidelberg.
Table A: Tier 1 global copper and gold discoveries since 2006.
This table does not purport to be exhaustive exclusive or
definitive.
Resource Tonnage Grade Contained Metal
Category (Mt)
------------ ----------- -------- --------------------- -----------------------
Cu Au CuEq Cu Au CuEq
(%) (g/t) (%) (Mt) (Moz) (Mt)
------------ ----------- -------- ----- ------- ----- ------ ------- ------
>1.1%
CuEq Indicated 70 1.1 1.3 1.8 0.7 2.8 1.2
------------ ----------- -------- ----- ------- ----- ------ ------- ------
Inferred 50 1.1 1.3 1.8 0.5 1.9 0.8
------------------------ -------- ----- ------- ----- ------ ------- ------
0.9 -
1.1% CuEq Indicated 50 0.7 0.5 1.0 0.3 0.9 0.5
------------ ----------- -------- ----- ------- ----- ------ ------- ------
Inferred 50 0.7 0.5 1.0 0.4 0.9 0.5
------------------------ -------- ----- ------- ----- ------ ------- ------
0.3 -
0.9% CuEq Indicated 310 0.4 0.2 0.5 1.2 2.3 1.6
------------ ----------- -------- ----- ------- ----- ------ ------- ------
Inferred 550 0.4 0.2 0.5 2.0 3.5 2.6
------------------------ -------- ----- ------- ----- ------ ------- ------
Total
>0.3%
CuEq Indicated 430 0.5 0.4 0.8 2.3 6.0 3.4
------------ ----------- -------- ----- ------- ----- ------ ------- ------
Inferred 650 0.4 0.3 0.6 2.9 6.3 4.0
------------------------ -------- ----- ------- ----- ------ ------- ------
Table B: Alpala Mineral Resource statement as of 18 December
2017
Notes:
-- Mr. Martin Pittuck, MSc, CEng, MIMMM, is responsible for this
Mineral Resource estimate and is an "independent qualified person"
as such term is defined in NI 43-101.
-- The Mineral Resource is reported using a cut-off grade of
0.3% copper equivalent calculated using [copper grade (%)] + [gold
grade (g/t) x 0.6] based on a copper price of US$2.8/lb and gold
price of US$1,160/oz.
-- The Mineral Resource is considered to have reasonable
potential for eventual economic extraction by underground mass
mining such as block caving.
-- Mineral Resources are not Mineral Reserves and do not have
demonstrated economic viability.
-- The statement uses the terminology, definitions and
guidelines given in the CIM Standards on Mineral Resources and
Mineral Reserves (May 2014).
-- The MRE is reported on 100 percent basis.
-- Values given in the table have been rounded, apparent
calculation errors resulting from this are not considered to be
material.
-- The effective date for the Mineral Resource statement is 18th December 2017.
Figure 1: Location of Cascabel project in northern Ecuador,
highlighting the significant capital advantages held by the
project, with proximity to ports, road infrastructure,
hydro-electric power stations and the trans-continental power
grid.
Figure 2: Drill Hole Plan along the greater Alpala area, showing
copper equivalent assay results, extrapolated current drill hole
paths in red, and intervals awaiting assay results indicated in
blue.
Figure 3: Drill Hole Plan along the greater Alpala area, showing
copper equivalent assay results, extrapolated current drill hole
paths in red, intervals awaiting assay results indicated in blue,
and coincident surface soil geochemical targets.
Figure 4: Details of recent assay results at Alpala and
Aguinaga.
Figure 5: Photographs of typical mineralisation within the early
diorite intrusion intersected in Hole 6 at Aguinaga, showing
intense quartz-chalcopyrite and chalcopyrite veining.
This information is provided by RNS, the news service of the
London Stock Exchange. RNS is approved by the Financial Conduct
Authority to act as a Primary Information Provider in the United
Kingdom. Terms and conditions relating to the use and distribution
of this information may apply. For further information, please
contact rns@lseg.com or visit www.rns.com.
END
UPDGGURUMUPRUQW
(END) Dow Jones Newswires
July 13, 2018 02:12 ET (06:12 GMT)
Solgold (LSE:SOLG)
Historical Stock Chart
From Apr 2024 to May 2024
Solgold (LSE:SOLG)
Historical Stock Chart
From May 2023 to May 2024